• 0

    posted a message on Raven: Auras, Cooldowns and Notifications
    Quote from jmt01
    Also, when my spell is interrupted in pvp, it shows all my spells being on cooldown. How do I prevent this from happening?

    It would help me to know your warlock's specialization and level. The lockout detection relies on a list of spells that is supposed to cover all specializations but apparently doesn't.
    Posted in: General AddOns
  • 0

    posted a message on Raven: Auras, Cooldowns and Notifications
    Quote from naboomkin
    Hey Tomber -

    Long time user, but I haven't messed with Conditionals much. I'm trying to create a notification for Stellar Flare, which ideally, hits the target when Eclipse Power is at 0.

    How I'd like this to work is when my eclipse power *hits* -20 (during lunar) or +20 (during solar) then I get both an auditory and visual notification. The Stellar Flare icon would appear and pulse and the sound would go off. Then, once I cast the spell, the icon would stop pulsing and simply be displayed as normal and count down until the DOT is finished.

    I've tried messing with the Eclipse areas in the conditional tab and creating a Stellar Flare bar group (icon), but all I can get to work is the DOT display and a sound upon casting. I'm convinced Raven can do this and I'm just not grasping how. From searching these forums and the web, I can't find a similar scenario that will help me figure it out.

    Any help would be appreciated and thanks a lot for your work on such a great mod.

    I tend to agree that this is probably possible with the right combination of conditions and dependencies between conditions. However, it would likely take a fair amount of time to sort it and test it. You would probably be better off using WeakAuras2 for this (you might even find something similar that you can simply import). I leveled my druid feral this expansion so I'm pretty rusty on eclipse mechanics myself.
    Posted in: General AddOns
  • 0

    posted a message on Raven: Auras, Cooldowns and Notifications
    Quote from jmt01
    I've been trying my hardest but I can't see to figure this out. How do I create a condition to remind me to cast my warlock buff "Dark Intent"? I want to be notified if I'm in combat and I don't have the buff up.

    Also, when my spell is interrupted in pvp, it shows all my spells being on cooldown. How do I prevent this from happening?

    For Dark Intent warning: create a condition with appropriate name, add first test with Player Status>Enable Test>Enable, Player Status>Combat>Enable, Player Status>Combat>In Combat and then add second test with All Buffs>Enable Test>Enable, All Buffs>Buff>Dark Intent, All Buffs>Test Buffs>Not All Active, All Buffs>Who Has Buff>Player, All Buffs>Who Cast Buff>Cast By Anyone. This condition should be true only when in combat and no Dark Intent buff on the player. You might want to go to the condition's General tab and set Associated Spell to Dark Intent so that it uses the correct icon. You can then include this condition in any custom bar group.

    As for interrupts showing all spells being on cooldown: this is not really supposed to happen since Raven includes detection of spell school lockouts that should suppress the extra cooldowns. It isn't really surprising that it doesn't work, I guess, given all the changes in WoD spells. I will look into this when I get more time.
    Posted in: General AddOns
  • 0

    posted a message on Raven: Auras, Cooldowns and Notifications
    Quote from Alex5917
    Hello.
    I try to make notification for DK spell "Plague Leech".
    this requires three conditions: Frost Fever + Blood Plague + 2 fully depleted runes.
    I made 2 different conditions:
    1 - Frost Fever+Blood Plague + 2 frost depleted runes. And it work perfect.
    2 - Frost Fever+Blood Plague + 2 unholy depleted runes. And it work perfect too.
    But if i try to merge 2 these conditions with logical OR.Icon of notification appears on screen right after creation. It's looks like frozen and not changes state in any conditions.
    Please can u help with creation some conditions with logical OR? Because I try to create some other conditions with logical OR and in all cases it not works.

    I just answered this on Raven's curse.com page where the same question was posted. Conditions definitely have a learning curve but hopefully that answer will work for you. I did just verify that logical OR between conditions is working on the release version as well.
    Posted in: General AddOns
  • 0

    posted a message on Raven: Auras, Cooldowns and Notifications
    Phanx, that is awesome input (as always) and I'll include the suggestions in next build.
    Posted in: General AddOns
  • 0

    posted a message on Raven: Auras, Cooldowns and Notifications
    Quote from GrimPala
    Hi Tomber

    Is there a chance to translate Raven in other languages? :)

    Raven has internal support for localization and I welcome anyone to take a look at doing the translations. There are out-of-date chinese and korean translation files included in the distribution (but not enabled) so those would be good starting points for those languages. It is a big project, though, because Raven uses a lot of strings (probably way too many strings, but it would be hard to start over on the options panel design).
    Posted in: General AddOns
  • 0

    posted a message on Raven: Auras, Cooldowns and Notifications
    Quote from MercurySC
    The font doesn't change when I select a different font in Raven. Bug?

    I expect you are using ElvUI or Tukui (or a derivative package). If so, go to the Defaults tab, scroll down to Tukui/ElvUI section, and disable the setting that makes Raven use the package's font.
    Posted in: General AddOns
  • 0

    posted a message on Raven: Auras, Cooldowns and Notifications
    Quote from thisrayfe
    Hi,

    I'm having a frustrating issue with the AddOn. I can set up everything. All my bars, buffs, debuffs, timeline and whatnot. I can get everything working really well for only the time that I'm logged in.

    If I log out and come back in Raven has reset, nothing is there. Profiles don't take, nothing saves.

    I uncheck "Minimap Icon" then I reloadui and the minimap icon is back. I do the same and log out and back in and the minimap icon is back (and re-checked).

    It isn't saving anything! Please help! :confused::confused::mad:

    This is almost certainly not a Raven-specific issue since it uses the standard Ace3 profile system (which, in turn, uses the built-in Blizzard mechanisms). I've seen something similar reported in this thread related to special characters in names, perhaps it applies. Also, if you somehow have permissions set up wrong for the WTF folder that might contribute, but I don't know details since I've never experienced it myself. Oh, and make sure you don't have an out-of-date Ace3 standalone folder in your addons. Other than that, not sure what to suggest.
    Posted in: General AddOns
  • 0

    posted a message on Raven: Auras, Cooldowns and Notifications
    Quote from Maahe
    I cannot for the life of me find a (the) way of controlling the cooldown overlay for spells on the action bar. I'm sure I used to do this with Raven? I realize Blizzard added numbers - but I'm not happy with their look and would like Raven to take the wheel. Where, if at all, can I do this?

    The Highlights module was removed from Raven for 6.0.2. It was mentioned in the 6.0.2 summary posts on the download sites but of course those were missed by anyone using the client to download.

    Highlights were removed for several reasons. First, it was based on the internal design of Bartender4 and Dominos, which have changed and caused issues in the past, making it a challenge for development and testing. Second, it was a continual source of confusion to new users who didn't expect a buff/debuff addon like Raven to affect their action buttons. Third, the performance of the highlights code was not very good (it was some of the first code I wrote for Raven). And, finally, the highlights functionality is almost completely separate from the rest of the addon, which makes it a good candidate for moving into a separate "Raven Highlights" addon if there is enough interest and no suitable substitute.

    Inline Auras was a popular choice for a while but you'll have to check its status. It looks like there is a new addon by the same author called AdiButtonAuras but I've not tested it so don't know if it will replace the Highlights module directly.
    Posted in: General AddOns
  • 0

    posted a message on Raven: Auras, Cooldowns and Notifications
    Galvin, I don't have a way to test this Mortal Strike cooldown modified by 4-piece bonus. Is it supposed to modify the cooldown while Mortal Strike is already on cooldown or only for the next Mortal Strike? One theory would be that the game is not generating a new event if Mortal Strike is already on cooldown (which would trigger a Raven refresh).
    Posted in: General AddOns
  • 0

    posted a message on Raven: Auras, Cooldowns and Notifications
    Quote from Galvin
    Update: Think I got this working, I searched for "~= nil" in all the files and edited them out. Since blizzard changed all their functions that returns 1 and nil to true and false.

    I think I got all the "== nil" and "~= nil" and "== 1" and "~=1" fixes into the new alpha.
    Posted in: General AddOns
  • 0

    posted a message on Raven: Auras, Cooldowns and Notifications
    Quote from Stanzilla
    what do you think about adding a anti-spam/merging feature for AoE spells? I don't really need to see my hurricane debuff on 20+ mobs (i.e 20 bars in my face). So merging certain spells down to one bar would be cool

    This has been suggested before and I occasionally think about how to implement it but so far I haven't come up with a satisfactory implementation strategy.
    Posted in: General AddOns
  • 0

    posted a message on Raven: Auras, Cooldowns and Notifications
    Quote from Rallos85
    Two questions...

    Is there a way to add your own sound files or use the in-game sound files like "beware" and "run away" from dbm?

    Would it be possible to allow multiple selections in the "cast by" sections? I want to be able to track spells by player and by target. (for my debuffs and mages ice block debuff for example)

    Raven can use any sound registered with SharedMedia. Unfortunately, it doesn't look like DBM registers its sound files.

    Raven makes it easy to merge a couple bar groups with different "cast by" settings. This allows you to do the equivalent to having multiple selections in "cast by" plus specify different filtering for each. Check out the merge option on the bar group's General tab.
    Posted in: General AddOns
  • 0

    posted a message on Raven: Auras, Cooldowns and Notifications
    Quote from Faeveroth
    Hello,
    I'm trying to track some buffs on my current target, but only Ice Block seems to work.
    Can somebody help me? Maybe I have configured something wrong.

    http://s4.postimg.org/ehkj44sgd/image.jpg
    http://s4.postimg.org/kdegrj7rh/image.jpg
    http://s4.postimg.org/fg0w6f5sd/image.jpg
    http://s4.postimg.org/lw9uwiebx/image.jpg
    http://s4.postimg.org/fhatzu7m5/image.jpg
    http://s4.postimg.org/8hws0h7nx/image.jpg

    If nobody finds an error, I might open a ticket.

    Looks like you want to change Cast By setting to either Target (if you only want to see buffs the target casts on itself) or Anyone (if you don't care who cast the buff).
    Posted in: General AddOns
  • 0

    posted a message on Raven: Auras, Cooldowns and Notifications
    Quote from Malaphus
    Hello,

    I have two bar groups, one for buffs and one for debuffs. The debuffs bar group is attached to my buff bar group with a 10px vertical offset and is set as "show as last bar". This works fine most of the time but sometimes the bars begin to overlap each other. Any ideas what might cause this and how I can fix it?

    Looks like the debuff bar group is set to grow up, which makes it overlap the buffs bar group when it has multiple debuff bars showing. Change its direction on the Layout tab so that it grows down. A good way to test this is with test bars which you can also toggle on the Layout tab.
    Posted in: General AddOns
  • To post a comment, please or register a new account.