• 0

    posted a message on Bartender4 - Official Topic
    Quote from Nevcairiel
    I actually tried it, and i didn't get that behaviour on range. Only on melee attacks it ever happend, and usually only on auto-attack too.. And i honestly don't know of any special code in BT3 that might've caused it


    After a more thorough test, I found what is causing it, the WoW Interface option that makes switching between Auto-Attack and Auto-Shot, well automatic. If it is checked, all "attack" commands which are set for melee only, becomes set for range attacks as well (mages, hunters, warlocks, etc.)

    Case close. Thanks ^_^ Might be one of the undocumented changes, I always have it enabled before but it never auto-targets, it only switch to range if I am already in combat, and the target moves away. The current format of that setting, it auto-targets for range attacks now.

    Quote from JayLucky
    I'm having numerous problems with bt4 and siege weapons. I keep having to turn bt off because either, the buttons do not work or they are completely incorrect from what they should be. Prime examples are the Flight of the Wintergarde Defender quest in Dragonblight and the Flying Machine quest in Howling Fjord.

    Any ideas?


    Yep. There is something different with Siege Weapons that isn't compatible with BT4 yet. Also, I noticed there are some Siege Weapon options that are auto-hidden by BT4. I have to disable BT4 as well before I use Siege Weapons.

    Hmm, suggestion. Maybe a separate panel for Siege Vehicles instead of the "possess" option?

    Anyway, back to Northrend.
    Posted in: General AddOns
  • 0

    posted a message on LibExtraTip and LibTooltip??
    Ahh that's cool. Can't wait to see implementations of "LibQTip" :D

    Hmm, how about... LibAceTip ? :p
    Posted in: General Chat
  • 0

    posted a message on ckknight gone / his addons dead ?
    Quote from Nerid
    Where is he? LibDogTag, CowTip and I guess all his other addons aren't working 100%. Will he come back? Are there legal problems now that curse.com has enslaved wowace.com?

    His last activities on wowinterface.com, here and on curse.com were almost a month ago...

    Just asking.



    Crap... I thought he died or something.
    Posted in: General Chat
  • 0

    posted a message on Bartender4 - Official Topic
    Quote from Nevcairiel
    If i can figure out how to disable that behaviour, i will add a checkbox


    Hi Nev,

    I was reading the pages of this thread and read that some users requested the "Auto-Target" feature which is present in BT3.

    Here's one of the post: http://forums.wowace.com/showpost.php?p=230003&postcount=427

    Quote from user_930846
    I have noticed the same issue. Where I used to be able to just hit a spell key (using BT3) and the game would auto-target whatever was nearest to me, I no longer get a target now. I do not have Auto-Assist enabled mostly because I never have anything to assist (well, my pet but I don't keep him targeted). I've started a brand new warlock for my husband and solo exclusively (for now). I really miss being able to just hit a spell key and have it hit something.



    And another one: http://forums.wowace.com/showpost.php?p=229866&postcount=423

    Quote from Firefiendx
    Just changed from BT3 to BT4, everything works great except the auto targeting.

    BT3 I could hit an attack button (Sinister Strike) and it would auto target the nearest target. If I was stealthed, I could just hit cheap shot and if I was passing another stealther it would auto target when they were in view. Now I get nothing.

    Would even give the error msg/speech that you didn't have a target if nothing was close enough....don't get that now either.

    With BT4 it isn't doing that. Is this not a feature in BT4 or am I missing something in the settings. Is this something that was changed with the feature of auto attacking your targets target?

    I am just using BT4, no ButtonFacade

    Forgive me if this has been pointed out.....I went through all 22 pages here and didn't see anything on it.



    I hope that might help ;) Whatever code you added during that time period, is the Auto-Target one. Hehe.

    Anyway, I hope it really does help lol. I've encountered other range players using BT4 in our server who are aggroing or CC breaking :p I asked them if the cause was the Auto-Targetting.
    Posted in: General AddOns
  • 0

    posted a message on LibExtraTip and LibTooltip??
    From: http://forums.norganna.org/discussion/8827/auctioneer-conversion-to-use-libextratip/

    Difference?
    I'm not an addon developer but as WoWAce "donated" (if you will) LibStub for everyone, which others are using. Maybe WoWAce use LibExtraTip, which, as per the link above, was developed not just for Auctioneer but for the WoW Community in general. (Which was the same for LibStub if I am not mistaken.)

    I don't know, as I've said I don't develop addons, but maybe using the same "tooltip" Lib or working together for one-for-all tooltip Lib will be better. (I understand that it is hard to swing it to a particular development road :p )

    Anyway.. back to IRL stuff... must finish before WotLK launch ;)
    Posted in: General Chat
  • 0

    posted a message on Bartender4 - Official Topic
    Quote from Nevcairiel
    Oh, i misunderstood you, then. What you are saying is that you have no target at all, and when you press a spell it automatically targets something and starts to cast?

    Now thats nothing i ever intended to do, also i kind of like the feature myself =P I'll check it out.


    Yep, that one :D

    I find it useful for casters especially healers, however for DPS like Hunters, it's hard to spam :p So probably a setting globally, coz I want it enabled for my non-spamming chars ^_^

    Thanks thanks!!
    Posted in: General AddOns
  • 0

    posted a message on Bartender4 - Official Topic
    Hi Nev,

    I'm just reposting my reply to your reply in my ticket (ticket -> http://www.wowace.com/projects/bartender4/tickets/21-option-to-disable-auto-target/ ) as I am not sure if the system will still inform you if the ticket has been marked as "invalid".

    Quoting myself:

    I have all "Auto-Assist" settings "unchecked" both WoW's default setting and per bar of Bartender4, and I still get "Auto-Targeting".

    If the BT4's Auto-Targeting is related to the Auto-Assist checkbox, then probably this is a bug ;)


    To add, what happens is that, if I have no targets and I press an attack key/skill, BT4 will select the closest target whether I'm soloing or in a party/raid. If I disable BT4 and use the default, I dont get Auto-Targeting, which during raids is very risky, considering that there is the factor of lag.

    I also attached my SavedVariables in case it will help.


    Thank you very much.
    Posted in: General AddOns
  • 0

    posted a message on What is macro 'reset=' for?
    Ahh I see, I think I got it now.

    reset is for when I do not press/activate the macro within the specified reset second, right? Then if I keep on pressing the macro, the sequence kicks in again (to its next skill/spell), the reset timer goes back to 0.
    Posted in: General Chat
  • 0

    posted a message on What is macro 'reset=' for?
    What is 'reset=' for?

    According to WoWWiki:

    Used as a timeout for the command.
    So it means, the sequence will go back to the beginning after n seconds, correct?

    Then WoWwiki goes on to say:

    you cannot use a reset timer to account for cooldown
    So, what is reset for?

    Example:

    /castsequence reset=6 Arcane Shot, Steady Shot, Steady Shot, Steady Shot
    The way I understood it is that "Go back to First Skill after 6 seconds else continue until sequence is over".

    My Arcane Shot is 6sec CD. My Steady Shot is on 2sec cast.
    So, while my Arcane is on a CD, I can cast 3 Steady.
    Otherwise, if the sequence isn't over yet and 6secs has passed, Sequence resets so it can cast Arcane again.

    Did I get it correctly?

    But if a reset timer cannot be used to "account for cooldown", so what is the use of reset then?



    Thank you very much for all the help. ^_^ Didn't bother about it until just recently, I always do things manually prior to using macros :p
    Posted in: General Chat
  • 0

    posted a message on Bartender4 - Official Topic
    Quote from Packwolf
    Bartender 4 needs more buttons for the new hunters pet powers.


    I don't think that is possible.

    1) Pet Skills are locked to the Pet Bar only
    2) The Default Pet Bar is strictly that
    3) The Bartender4 Pet Bar is actually the default Pet Bar

    It needs to be requested to Blizzard ;) But IMO, we do not need more than what we have already. Most of the pet skills not in the Pet Bar are in Auto-Cast mode.

    Now if I'm wrong and it is possible, then by all means put it to todo list :p hehe...
    Posted in: General AddOns
  • 0

    posted a message on WoW Server Techs
    Quote from Allara
    I think you may have meant that the other way around.


    Yah lol =))

    Thanks for catching that :p
    Posted in: General Chat
  • 0

    posted a message on WoW Server Techs
    I wouldn't be surprised if their NET is only 20% of their GROSS.
    Posted in: General Chat
  • 0

    posted a message on Bartender4 - Official Topic
    Hi, is there a way to disable BT4's "Auto-Target"?

    It isn't good for spamming especially in raids because a range like me will have to "control" pressing keys lest I want to aggro some group of mobs not (yet) meant to be aggroed. T_T

    I have Auto-Assist disabled both in BT4 and WoW settings itself.

    Or maybe there is a setting for it already and I kept on missing that setting, anyone could show where then?

    Thanks a bunch. ^_^
    Posted in: General AddOns
  • 0

    posted a message on Cartographer and WLK
    Quote from blankstare2
    with MBB (minimap button bag) I get the following:

    [2008/10/20 07:37:05-102-x5]: MBB\MBB.lua:428: stack overflow
    MBB\MBB.lua:435: in function `ohide'
    MBB\MBB.lua:435: in function `ohide'
    [repeat]


    Quote from Arrowmaster
    Why the hell are you posting that here?


    LOL

    Miss post coz he's multi-tasking, or...... :p
    Posted in: AddOn HELP!
  • 0

    posted a message on Where exactly are bug reports/tickets supposed to live?
    Quote from Farmbuyer
    Two separate problems, both leading to frustration with the current ticket system.

    The first one actually has its own ticket, after I finally beat the bug report page into submission. It's #793 on curseforge. Summary: trying to view curseforge tickets leads to 403 web errors on wowace.


    Which add-on are you talking about? I view tickets over at curseforge with no problems at all. ^_^

    Quote from Farmbuyer

    The second one is this: we're trying to track down a bug in the interaction between Bartender4 and Barrel. (The fact that enabling Barrel -- which would let me see *other* bugs from bugsack -- is itself causing bugs, does not make this any more fun.) Somebody in http://forums.wowace.com/showthread.php?t=13684 said they had submitted a ticket for Barrel, which is now http://www.wowace.com/projects/barrel/tickets/1-cannot-use-api-for-openallbags-while-barrel-enabled/

    You'll note that ticket is "ticket #1", and that there are apparently no other wowace tickets, and that this ticket cannot be seen from curseforge (which reports no tickets for Barrel).


    Barrel does not exist in CurseForge, it is in WoWAce.
    Secondly, it is impossible for CurseForge to report "no tickets for Barrel" since Barrel is in WoWAce not on CurseForge - user-end/view.

    Quote from Farmbuyer

    Also, trying to view/search any kind of tickets from wowace leads to curseforge, which makes the above Barrel ticket essentially inaccessible. I can't find a way to even see it other than just following the link from the thread above.


    I can view tickets fine on WoWAce, doesn't lead me to CurseForge.

    ---
    I can only assume that you have a Cache problem with your browser.

    Try the ff:
    1) Visit wowace.com
    2) Visit www.wowace.com/projects/
    3) Visit curseforge.com
    4) Visit wow.curseforge.com

    * Press CTRL+F5 for Force Refresh. This forces your browser to delete the cache of those sites above and loads the site directly from the server again.

    And if you want to "view" existing Tickets, you click "Tickets". There is no 'drop-down' that says "View Tickets".

    Hope that helps.
    Posted in: General Chat
  • To post a comment, please or register a new account.