• 0

    posted a message on WTF just happened?
    I stop playing for six months and the whole addon community goes ballistic :confused:

    Just considering a return to WoW, but then I notice there's no sweet WAU to keep all the 100 addons up-to-date, everything working minutes after new patch was released, and laughing at those waiting impatiently for the 'release' to come available on some site (sometimes took about 2 weeks, can't be better now).

    Blizz, some gold to host wowace, plz :)

    Or if someone from Google reads this, buy Curse, host wowace, thx.
    Posted in: Updaters
  • 0

    posted a message on [Prat] /clearfocus command not working - forbidden function (ClearFocus())
    Quote from Seerah »

    /clearfocus works fine in my macro and when typed out normally. My guess is it's your macro. Prat parses macros, as they go through chat. Post your macro here.


    That's the problem. The problem is just in /clearfocus, even when not using any macro.
    So if I set focus with /focus and then /clearfocus (both typed), clearfocus refuses to work.
    and if I a make macro with nothing but "/clearfocus", still no good (as the commands still go through "chat" I believe)

    EDIT: I retested this without removing any addons.

    And this macro works:
    /focus [button:1]
    /clearfocus [button:2]

    And this macro works (I'm pretty sure I tried it so it must have been the restart):
    /clearfocus

    then things get weird.. after setting the focus.
    1) Typing "Enter" (to "open chat") and typing /clearfocus works!
    2) Typing "*" (my hotkey for "open chat slash", which opens chat with "/" and typing clearfocus *does not* work (and this is what I usually have been doing)

    this pretty much solves my problem because I now have a way to remove the focus, but still, pretty odd UI / chat command issue.

    Quote from Seerah »

    edit: and for future reference, post your queries in the appropriate threads, as the sticky suggests. :)


    My bad :( Thank you for not flaming me into oblivion, for some reason I didn't post to Prat thread even that I checked it.
    Posted in: General AddOns
  • 0

    posted a message on [Prat] /clearfocus command not working - forbidden function (ClearFocus())
    Hello,

    Apparently Prat stops /clearfocus command from working. it doesnt't matter if I type the command or place it in macro. (code from typed command)

    I have tons of addons, but after little search here I pinpointed this to Prat (some other similar errors being "blocked" by Prat).
    so I disabled Prat (leaving every other addon in place), and /clearfocus command was working again. Unfortunately I couldn't find this exact problem or solution to it :(

    Any idea what's the problem? Any configuration/setting I can turn-off to make clearfocus work with Prat?
    I'd hate to keep Prat disabled, it being such a good chat mod.

    Date: 2008-01-15 16:20:31
    ID: 52
    Error occured in: AddOn: Ace2
    Count: 1
    Message: Error: AddOn Ace2 attempted to call a forbidden function (ClearFocus()) from a tainted execution path.
    Debug:
      [C]: ClearFocus()
      ..\FrameXML\ChatFrame.lua:1204: value()
      ..\FrameXML\ChatFrame.lua:3092:
       ..\FrameXML\ChatFrame.lua:3035
      [C]: ?
      [C]: ChatEdit_ParseText()
      ..\FrameXML\ChatFrame.lua:2802: ChatEdit_SendText()
      ..\FrameXML\ChatFrame.lua:2823:
       ..\FrameXML\ChatFrame.lua:2822
      [C]: ChatEdit_OnEnterPressed()
      [string "*:OnEnterPressed"]:1:
       [string "*:OnEnterPressed"]:1
    AddOns:
     Atlas, v1.10.3
     AtlasBattlegrounds, v1.10.3
     AtlasDungeonLocs, v1.10.3
     AtlasEntrances, v1.10.3
     AtlasFlightPaths, v1.10.3
     AtlasOutdoorRaids, v1.10.3
     AtlasLoot, vAtlasLoot Enhanced v4.02.01
     AucAdvanced, v5.0.PRE.2662
     AucFilterBasic, v5.0.PRE.2662 (BillyGoat)
     AucMatchUndercut, v5.0.PRE.2468 (BillyGoat)
     AucStatClassic, v5.0.PRE.2662 (BillyGoat)
     AucStatPurchased, v5.0.PRE.2662 (BillyGoat)
     AucStatSimple, v5.0.PRE.2662 (BillyGoat)
     AucStatStdDev, v5.0.PRE.2662 (BillyGoat)
     AuldLangSyne, vr57394
     BagginsClosetGnome, v2007-11-13
     BagginsProfessions, v2007-11-17
     BagginsUsable, v2007-11-13
     BagginsSearch, v1.0.46487
     Baggins, vBeta 1
     BagginsBtmScan
     BanzaiAlert, v1
     BeanCounter, v5.0.PRE.2662 (BillyGoat)
     BigWigs, v2.0 r56439
     Bongos2, v1.10.1
     Bongos2ActionBar
     Bongos2CastBar
     Bongos2MapBar
     Bongos2RollBar
     Bongos2Stats
     Bongos2XP
     BtmScan, v5.0.PRE.2662
     Buffalo2
     Cartographer, vr58017
     CartographerCleanup, v1.0
     CartographerHerbalism, v1.0
     CartographerMining, v1.0
     CartographerVendors, v1.0
     CartographerFishing, v1.0
     CartographerNoteshare, v1.0
     CartographerQuestObjectives, v0.9b
     CartographerQuests, v0.2
     CartographerRoutes, v1.0
     CartographerStats, v1.0
     cgProfiler, v1.55048
     ClearFont2, v2.1
     Clique
     ClosetGnomeFishing, v0.2b
     ClosetGnomeMount, v1
     ClosetGnome, v1.0.58130
     CooldownCount, v2.1
     Decursive, v2.0.5 
     eePanels2, v2.0
     Enchantrix, v5.0.PRE.2662
     EnchantrixBarker, v5.0.PRE.2662 (BillyGoat)
     EnhTooltip, v5.0.PRE.2662
     FishingBuddy, v0.9.3i
     FBOutfitDisplayFrame, v0.9.3i
     FBTrackingFrame, v0.9.3b
     FBMergeDatabase, v0.9.3i
     FreeRefills, v2.0
     FuBarAssistFu, v3.0
     FuBarClockFu, v3.0
     FuBarDurabilityFu, v2.0
     FuBarExperienceFu, v1.1 $Revision: 55081 $
     FuBarFactionItemsFu, v2.2.1
     FuBarFactionsFu, v2.2
     FuBarFarmerFu, v2.0.$Revision: 55081 $
     FuBarFishingBuddyFu, v2.2a
     FuBarFriendsFu, v2.4
     FuBarGroupFu, v1
     FuBarGuildFu, v2.4
     FuBarMCPFu, v1.1 ($Revision$)
     FuBarMoneyFu, v20000-1
     FuBarPerformanceFu, v2.0
     FuBarProfessionsFu, v1.05.0
     FuBarRecZone, v2.0.$Revision: 56513 $
     FuBarRecountFu, v3.4
     FuBarRestFu, v2.0
     FuBarTopScoreFu, v2.0
     FuBarToFu, v2.0
     FuBarTrainerFu, v0.2
     FuBarVolumeFu, v2.0.$Revision: 55081 $
     FuBar, v50710
     FuTextures, v2.0
     Gatherer, v3.0-DEV
     GathererDBWowhead, v1.0.2007-10-07
     Grid, v55010
     GridAlert, v56111
     GridAutoFrameSize, v1.0
     GridStatusHealer, v58114
     GridStatusHots, v2.3
     GridStatusMissingBuffs, v2.2.0.00
     Informant, v5.0.PRE.2662
     Ace2
     HealComm20, v2.0
     LightHeaded
     LittleWigs
     MBB
     CEnemyCastBar
     CECBDebuffs
     CECBPvPModule
     NotesUNeed, v6.31.20300
     nQuestLog, v1.0 r57213
     Omen, v2.1r55025
     Parrot, v1.0r53391
     PitBull, v2.0r56911
     Postal, v2.1 r58353
     Prat, v2.0 57869
     ProfessionsBook, v2.1.4
     Quartz, v0.1.0
     Recount, v$Revision: 54446 $
     SilverDragon, v2.0.57698
     simpleMinimap, v20100-6
     Stubby, v52
     Swatter, v5.0.PRE.2662
     Tactics, v1.23
     TomTom
     VisualHeal
     WOWEconPriceMod
    Posted in: General AddOns
  • 0

    posted a message on [PitBull] Full Layout Import? (all frames, settings, etc)
    Quote from Kelem »

    To copy the whole thing just copy the pitbull.lua file from the savedvariable folder


    Excellent. Exactly what I was asking and the answer I needed :)
    Posted in: Unit Frames
  • 0

    posted a message on [PitBull] Full Layout Import? (all frames, settings, etc)
    Quote from Seerah »

    It's really not as hard as people make it out to be (no offense) - if you have the patience and commitment to actually look at it and understand it.


    No offense taken :) This wasn't meant to be "I can't do it", but more of a "feature request" so more people would have the possibility to use it with ease. I took the time to check the menus and got the setup I wanted, it took about 3 hours reading and importing some frames and tuning the settings.

    As a notice to other new users, settings things up can be done a lot faster unless you're micro-detail-management-everything-must-be-lined-up kind of user like I am.

    IMHO, this doesn't take away the need for default settings better than "everything piled at the very middle" thou.

    And importing the whole setup would make possible to take someone's hard work and take the full benefit from it, as I see no reason for 100 people to do 3 hours of work, when someone can spend 5 hours in it, make it perfect and share it. Lot like "skins" in many other non-wow programs (and in some wow-addons as well I think)

    But like said, all this would only make excellent unit frame addon even better - with that said, I'm sticking with PitBull :)
    Posted in: Unit Frames
  • 0

    posted a message on [PitBull] Full Layout Import? (all frames, settings, etc)
    The Cool Layouts sticky is nice, but there's just single frames there,
    and I still have to tune settings to get it look right.

    So it's not much good for PitBull newbie, like me.
    I spent like 3 hours yesterday setting things up, and couldnt figure out many things :(

    Best solution would be: Import full layout, settings and everything.
    Is this possible? would this mean the whole .lua file?

    I'm looking for the minimalistic view (no screen clutter like portraits) for solo, party and raid.
    I mostly care about party/raid health as I am mainly healer.

    Is there guide for PitBull configuration somewhere?
    ..Where all the settings would be explained?
    Posted in: Unit Frames
  • To post a comment, please or register a new account.