Transcriptor file for Sartharion +3 Drakes. Please note that this fight usually doesn't take anywhere near as long as this 11 minute transcription. This was an incredibly messy kill with about 5 dps dead. Last week it was about a 3m 50s kill.
Also, due to the portals this file is going to be missing some data. It certainly looked like I wasn't picking up any combat log information from people who didn't take the portals. Next week I'll try to record one of just the up top area with out taking any portals - no promises though!
Transcriptor - Sartharion +3 Drakes.rar http://www.zshare.net/download/525600319c26cfcc/
About the r4822 Sartharion module. Sartharion does call to Tenebron at 20s and Tenebron does reply at 25s, but it is not actually attackable until ~30s.
Similarly, Shadron is attackable at ~1m 30s. Sartharion calls it at 1m 20s, Shadron replies at 1m 25s, and then it is on the ground at ~1m 30s.
Vesperon is the same deal at ~2m. Sartharion calls it at 1m 50s, it replies at 1m 55s, and at ~2m it's on the ground.
These values are most likely off by ~5s. I will fail less and turn on transcriptor next week.
After backing up my addons directory, I downloaded a couple different updaters today to give them a whirl.
Question, maybe I'm just using this wrong, but it seems like waddu always downloads every single addon - even if they have the same revision. The steps I used were to select 1. Check for Updates and then 2. Update all Addons. I would then see what certainly looked like every addon file being downloaded. If I selected Update all Addons again, it looked like they were all being downloaded a second time.
Is this the intended usage or am I just using it incorrectly.
Minor bug with 2.4.2-9Alpha:
Setting font size for count doesn't show the new size unless you disable then enable the count module or reload ui. The name and time modules do not have this issue.
Feature requests:
I'd like to have left and right be valid points for the name module. Also would like to have more than -10 and +10 offsets of the point. I personally always leave the count on the icon, but perhaps the same feature for count would be useful to some. I'd also like to see this option for the time display, including center.
Trying to set up a long column of buffs with "name time [icon]" stacked one on top of the other, but it's not currently possible.
Hmm, it's working fine for me using that described method, NeoTron.
1) Invite a person in a party.
2) Convert to raid
3) At this point oRA autoloads (disabled prior)
-> -> right here for me it changes to the set loot method automatically, immediately after oRA2 loads up. <- <-
4) /rarinvite
Sounds silly, but make sure the loot module is set to enable. oRA2 -> Loot -> check Enable. Maybe two months back it was changed to not be enabled by default.
ps: I usually use "/ora invite inviteRank 7" or /rainvite, both of these commands will automatically convert to a raid as people are invited and both of these commands auto set the loot method for me. You don't have to invite a single person and convert to a raid. /rainvite works when oRA2 is in it's "sleep mode" (for a lack of a better term).
edit: I'm mistaken, using "/ora invite inviteRank 7" does not work unless you click the oRA2 button. /rainvite does without clicking the button to turn on oRA2.
I don't seem to be able to move my pet action commands onto a regular action bar. Is there any way to do this? Playing a hunter, I would rather be able to keep my pet actions on the same bar as mine.
You can create macros that use the pet abilities and place those on your bars. After you have them all set up you could then hide the pet bar.
Been having issues with the oRA2 MT windows recently. The tank windows keep getting reset to old tank lists when promoted people log on.
Example: MT list is set to Tank1, Tank2. A promoted person logs off and this list is saved for them. MT list is then set to Tank3, Tank4. The promoted person then logs back on and their saved list is set, over writing the current MT list. List is now Tank1, Tank2 again.
This usually is not a big deal, except for when I don't notice it has happened and we pull the boss. I did ask everyone who was promoted to update their oRA2 as a couple people did not have latest version, but most did have r76320.
0
Also, due to the portals this file is going to be missing some data. It certainly looked like I wasn't picking up any combat log information from people who didn't take the portals. Next week I'll try to record one of just the up top area with out taking any portals - no promises though!
Transcriptor - Sartharion +3 Drakes.rar
http://www.zshare.net/download/525600319c26cfcc/
0
Similarly, Shadron is attackable at ~1m 30s. Sartharion calls it at 1m 20s, Shadron replies at 1m 25s, and then it is on the ground at ~1m 30s.
Vesperon is the same deal at ~2m. Sartharion calls it at 1m 50s, it replies at 1m 55s, and at ~2m it's on the ground.
These values are most likely off by ~5s. I will fail less and turn on transcriptor next week.
0
Question, maybe I'm just using this wrong, but it seems like waddu always downloads every single addon - even if they have the same revision. The steps I used were to select 1. Check for Updates and then 2. Update all Addons. I would then see what certainly looked like every addon file being downloaded. If I selected Update all Addons again, it looked like they were all being downloaded a second time.
Is this the intended usage or am I just using it incorrectly.
0
i think he means lock it's position on your screen, so that you can't accidentally drag it during the boss fight.
0
0
Ah sorry, I thought that event gave:
0
Can't you watch for like ENCHANT_APPLIED ? Or is that not the event for Weapon Buffs.
0
I just went and played with it. You're right. If I log in and do /rainvite, nothing. If I enable, then disable oRA2, then /rainvite it will work.
0
[2008/07/15 13:49:12-3967-x1]: PitBull_Aura-2.0\Filter.lua:637: Unknown spell ID: 12331
wowdb says that spell is Bloodthirst? http://www.wowdb.com/spell.aspx?id=12331 Warrior is specced Protection if that helps, doesn't have Bloodthirst.
0
0
Setting font size for count doesn't show the new size unless you disable then enable the count module or reload ui. The name and time modules do not have this issue.
Feature requests:
I'd like to have left and right be valid points for the name module. Also would like to have more than -10 and +10 offsets of the point. I personally always leave the count on the icon, but perhaps the same feature for count would be useful to some. I'd also like to see this option for the time display, including center.
Trying to set up a long column of buffs with "name time [icon]" stacked one on top of the other, but it's not currently possible.
0
1) Invite a person in a party.
2) Convert to raid
3) At this point oRA autoloads (disabled prior)
-> -> right here for me it changes to the set loot method automatically, immediately after oRA2 loads up. <- <-
4) /rarinvite
Sounds silly, but make sure the loot module is set to enable. oRA2 -> Loot -> check Enable. Maybe two months back it was changed to not be enabled by default.
ps: I usually use "/ora invite inviteRank 7" or /rainvite, both of these commands will automatically convert to a raid as people are invited and both of these commands auto set the loot method for me. You don't have to invite a single person and convert to a raid. /rainvite works when oRA2 is in it's "sleep mode" (for a lack of a better term).
edit: I'm mistaken, using "/ora invite inviteRank 7" does not work unless you click the oRA2 button. /rainvite does without clicking the button to turn on oRA2.
0
You can create macros that use the pet abilities and place those on your bars. After you have them all set up you could then hide the pet bar.
0
I use OmniCC with BT4 and they both function fine for me.
0
Example: MT list is set to Tank1, Tank2. A promoted person logs off and this list is saved for them. MT list is then set to Tank3, Tank4. The promoted person then logs back on and their saved list is set, over writing the current MT list. List is now Tank1, Tank2 again.
This usually is not a big deal, except for when I don't notice it has happened and we pull the boss. I did ask everyone who was promoted to update their oRA2 as a couple people did not have latest version, but most did have r76320.