• 0

    posted a message on ElkBuffBars v2 (finally Ace3 version)
    Quote from Elkano
    Besides that, you should only use the whitelist if you want to limit the list to some specific spells. If you only want to exclude some spells, use the blacklist, if you don't want filtering based on spell, don't use either. Unselecting everything in the white/blacklist should disable it again.

    And yes, EBB only lists those spells that have either been on the list at login or that have been seen ingame in that session.


    Thanks for the reply. So I need to de-select everything on the whitelist. Then go into the black list and just put a check by the ones I dont wnt to see?

    If I have EBB set not to sort at all will it autopmatically list the persons buffs in the exact order they have them? Reason I'm asking and really going through all this configuring is because I started playing a mage and I'm trying to make it easy for me to know when to spellsteal. Incredibly hard just using buff icons with all those buffs out there but your timers do make it much easier. btw very nice addon i like it a lot and the bars are very configurable and good looking.
    Posted in: General AddOns
  • 0

    posted a message on vertical statusbar help?
    Quote from Phanx
    Edit the texture file in Photoshop or some other graphics editor.



    You mean flipping the tga 90 degrees so it is vertical? I did that and pitbull sitll depletes the mama/health from right to left as opposed to up and down. It just made the bar look kinda funny =) Do you have any idea how to make it fill top to bottom?
    Posted in: AddOn HELP!
  • 0

    posted a message on Help with vertical statusbars in PitBull
    Quote from Seerah
    You're right. That post is old. PitBull3 *does* have vertical bars now.


    Than how do I make them fill vertically? I've been through every option back and forth and ain't found no way to do it. Sorry if this was the wrong thread yall I've seen it mentioned in this thread multiple times when I did a search and really didn't know where else to ask.
    Posted in: AddOn HELP!
  • 0

    posted a message on Help with vertical statusbars in PitBull
    Quote from avrik
    It's incredibly simple so you must be overdoing something. All you do is use notepad (wordpad will screw up formatting) and change the two "HORIZONTAL" entries to be "VERTICAL" instead. Then just rotate any textures that you are using 90 degrees clockwise or counter clockwise (so they are 32x256 instead of the normal 256x32).

    If you cannot do it still you can use this file I created. I just grabbed the latest Pitbull, deleted a few annoying modules, and rotated the included Cilo.tga inside the media folder. Please backup your current /Interface/ and /WTF/ folders and remove them from the WoW folder, and load this Pitbull folder with fresh settings. I'm not sure if previous settings cause problems, but it might be as only some people seem to not be able to get the vertical frames working. I'll remove this file in a day or two, just because its only an example file and I dont want to maintain yet another thing, so back it up for later use if you want.

    I also included a Pitbull settings file (in the /WTF_file/ folder) also that has very basic changes I made to support the vertical frames (just sizing and some text and module positioning).

    http://files.filefront.com/VertBasezip/;8966104;/fileinfo.html


    I know this is old, I know this has been asked a million timnes but HELP. I did everything youi said seriously. I got a TGA editor. flipped multiple different statusbars to 32x256.. I went through the pitbull lua and changed every instance of horizontal to vertical except when spacing was present. It did absolutly nothing. Even tried eveyr possioble combination of resizing the bar in the pitbull options. Sure I can switch the height and width, and make the bars side by side and look vertical but no matter wehat they fill horizontally.. can'ty get them to fill for top to bottom. and like isaid i did change the TGA to 32x256. Im sorry but Ive3 been searching these threads for hours. Pleae can you help me do this? It is now driving me nuts =)
    Posted in: AddOn HELP!
  • 0

    posted a message on ElkBuffBars v2 (finally Ace3 version)
    Quote from Shadoweric
    Well now that you've seen the bubble, AMS, hysteria... etc at least once, add them to your whitelist. And they're buffs, not debuffs. Make sure your EBB group is configured for that.



    I understand now. thank you, totally didn't realize it had to see the buffs once for it to work. cool. =)
    Posted in: General AddOns
  • 0

    posted a message on ElkBuffBars v2 (finally Ace3 version)
    Quote from Seerah
    For the whitelist, you have to have actually seen that buff first.



    Ok thanks for that info. Further testing I did while fighting in Wintergrasp. I foughrt a pally who bubled. Also my untiframes pitbull had dozens of buff icons for him yet elkano buff bar did not show me a single buff for him. Didnt show the bubble which is definnatly what I wanted. Doesnt show a death knights anti magic shell although it oes show icebound fort and boneshield. Ive got all filters turned OFF. Why doesnt it show thes ebuffs like antimagic shell, hsteria, a pallys bubble or divine protection? Can anyone help me with this? I promise I got all the filters off so everything should show.
    Posted in: General AddOns
  • 0

    posted a message on ElkBuffBars v2 (finally Ace3 version)
    Quote from jokeyrhyme
    Some buffs, even though players cast them by themselves, nevertheless count as though someone else cast them. If this is the case with some of those buffs, then you could try not using the "self-cast" filter, and instead use the "maximum time" filter (just a minute or two, maybe?) to zero in on the buffs you're interested in.

    As far as I know, ElkBuffBars gets all of its buff/debuff information from the game and it tracks everything. You don't add auras for it to track, you just have to make sure you have the right groups/filters configured.


    OK so what your saying is that EBB is definantly made to track every single buff/debuff regardless of whether its mine or someone elses? I made an anchor for the targets buffs/debuffs but I would look through the whitelist and not see the bufs I was looking for. Then I looked at the part in the config where it says Override or soemthing, and even though it had a lot of buffs I didnt hjave em all. I'll check my filters and see if it's something Im doing wrong. I'll just turn all the filters off even though I thought they were I could be wrong. Thanks for your help.
    Posted in: General AddOns
  • 0

    posted a message on Looking for PvP enemy buff/cooldown tracker
    Quote from freedumb
    http://wow.curseforge.com/projects/evl/files/

    all his addons in one package


    greatly appreciated. another quick question for those of you who pvp.. i've been looking for a looong time for a good enemy buff/cooldown tracker. i have used natur and i have used afflicted. natur is ugly as hell (sorry).. and at this point i am sitll very very new to lua editing. afflicted 2 seems to have been updated for wotlk and may be what i'm looking for except of course i have to add a lot of spells in manually.. which is fine because it has an option to do that.

    honestly though for whatever reason and i can't say exactly why i really really like classtimer. except that its CLASStimer. i can add in any buffs/debuffs that its missing but well it's weird. it seems to only work for my own buffs and debuffs. with the exception of when i spellstole power word shield it was able to put a timer for that on my player bar. but if I could just add in any buff/debuff i wanted whether it was casted by me or the enemy it wqould be great. anyways thats my predicament sorry if i've bored you. guess its also kind of off comment but i dont rlly talk in too many threads so if anyone has any suggestions they can offer me i'd appreciate it.
    Posted in: General Chat
  • 0

    posted a message on ElkBuffBars v2 (finally Ace3 version)
    Just started using EBB. My reason for using it is not so much to track my buffs but I want to be able to track the buffs that my enemies cast on them selves. It does work for that, except from what I can see in the buff list it does not have every single buff in the game. Like for instance if a deathknight was to cast Hysteria on himself. Its a buff but I dont think it shows up. Or if he was to cast Anti-Magic Shell or Icebound Fortitude. If I am wrong please correct me. Otherwise my question is is there a way for me to go in and add the missing buffs that I want displayed? Thank you for your time. btw very nice mod.,
    Posted in: General AddOns
  • 0

    posted a message on UI Screenshots - Show us what you use!
    Quote from ObbleTemp
    @frankie: its evl_spellalert. @ moozart: that threatmeter setup is mighty familier... :p


    Obbie any idea where to find evl_spellalert? I checked all the addon sites and couldn''t find it =(
    Posted in: General Chat
  • 0

    posted a message on UI Screenshots - Show us what you use!




    I hope I put these pics on correctly. Never done this before. This is my UI I am working on. My unitframes are pitbull but were definantly influenced by Ouf_LYN. Those frames are so nice. I really need to get some better pictures, will upload more later on. Any feedback appreciated. If I did not attack the pictures correctly could someone tell me how to insert the images? Thank you very much,.

    edit; wow they came out so small! The pics were taken right out of my screenshot folder how do I make them bigger?
    Posted in: General Chat
  • 0

    posted a message on UI Screenshots - Show us what you use!
    Quote from ObbleTemp
    http://www.wegame.com/watch/panels_again/

    I've moved the Uf's down about 100 or so. Still got masses to do though :<


    First off I just wanted to say your Panel UI is so awesome. Thats got to be the most complex UI ive seen. I was wondering if you would tell me about an addon your using though. In the bideo underneath your unitframes kinda in the middle of the screen it looks like theirs some text that is saying what your target is casting. Like it says

    BitMap: Renew
    Bitmap: Spirit of Redemption

    How did you do that? i'd love to get some addon that would just keep scrolling text of every move my enemy makes. Thanks for any info and very nice work.
    Posted in: General Chat
  • 0

    posted a message on UI Screenshots - Show us what you use!
    Quote from morphium


    It's fail.


    Hey What are those two timer bars for rapid shot and frost trap? Is that some kind of cooldown timer addon or is it a castbar? I really like the way those bars look. Looks the way my az castbars looks. Wish I could get my class timers bars to look the same... btw very nice. i almost never like UI's that have graphical addons like those skulls but this is the first one I do like,.
    Posted in: General Chat
  • To post a comment, please or register a new account.