• 0

    posted a message on UI Screenshots - Show us what you use!


    My first real UI redone recently, based off of other UIs I have seen here and elsewhere. Thanks to them for all ideas.

    Just made the switch from eepanels2 to kgPanels, Pitbull to Stuf frames.
    This was kinda tough to make, getting everything spaced to fit on my oddball resolution. Here is the download link on WoWInterface. I will try to get around to making other resolutions.

    http://www.wowinterface.com/downloads/info13035-HauntedUI.html
    Posted in: General Chat
  • 0

    posted a message on kgPanels Offical Thread
    Quote from kagaro
    for an easier time to lay them out, reparent everything to UIParent so you can se them. After that check the insets, they might be slightly off. Lasty you can nudge the panels in a direction in latest veriosn.


    Thanks for the help. I finally made the switch to kgpanels and Iam very happy. The nudge feature really helped me out. I just ended up starting from scratch and made my own panels. I parented the panels and spaced everything as best I could. This took me quite some time since Im new to this but Iam very happy its finished. Here is a pic of the new kgpanels layout. Nothing fancy but its just what I like.



    Thanks again for this mod!

    P.S. I was wondering if you could help me on a script to have Kgpanels make a certain panels glow red when in combat. If you could point me to a good script I would apreciate it. Hopefully I will be able to figure out how to add it. Thanks Again ;)
    Posted in: General AddOns
  • 0

    posted a message on kgPanels Offical Thread
    Hi Kagaro, Iam having a bit of trouble making the switch from eepanels2 to kgpanels. I have been trying to switch over for a while now trying to import the layout but haven't had any luck.

    When I try and import eepanels settings via kgpanels, It does not apply the right sizes of the panels nor the right textures. I have tried to import and then change what i think is wrong but I still cant get it right. You see I ripped the panels from an old version of Caith UI and I was able to resize them to fit my odd resolution of 1360x768. But with Kgpanels everything is off a few inches and the textures are not the same. So I was wondering if I could send you my eepanels2 folder and wtf files for eepanels2 and maybe you could fix it or tell me what I should do to make the switch.
    Sorry for asking for this help, but Iam not all that familiar with the panel settings since they are Caiths. When I re sized the original Caith panels, that process took me forever since I was not familiar with eepanels at all and some panels are hidden, or parented to others making it difficult for me. I have been trying to switch this for a few weeks when I have free time but its not working out well for me.

    If you could find the time to help me quick I would appreciate it, it would probably take you a few min to correct the imported layout to match my eepanels layout. My email is [EMAIL="ebuysales@gmail.com"]ebuysales@gmail.com[/EMAIL]. I could also send a donation for your time as I would appreciate it very much.
    I just want to make the switch since kgpanels is lighter and gets updated regularly. Thanks so much for your help and time. ;)

    PS - Here are some screens with eepanels2 before import, and kgpanels after import. As you can see, the textures are off, and the panels look like they are all shifted a bit to the right and also might be off sized because they overlap in some spots. Thanks Again!

    PPS - Off hand do you know the frame name for Azcastbar and Aztargetbar? I would want to switch from quartz to az and would want to parent them. I cant find the "frame name finder" in kgpanels.




    Posted in: General AddOns
  • 0

    posted a message on Skinner
    Hi, just to let you know, the last two releases of Skinner are crashing wow for me. Most noticeable, All my eepanels disappear, My lag goes through the roof and my Carbonite addon will not load properly. The version that i have to revert back to is 9056.7 then everything goes back to normal. When I tried the last two versions of skinner these problems arise. So for the time being Ill just stick with 9056.7 until this is fixed. Just wanted to tell you the issues so hopefully you can fix them. Great addon and great work. Thanks Again
    Posted in: General AddOns
  • 0

    posted a message on UI Screenshots - Show us what you use!
    Quote from Lyn »

    Screenshot: http://deponie.org/ui/099.jpg

    With oUF castbar and new texture for buffs/bars (the one from Neal, thanks for that). Still testing some new textures and such.. for my new layout :)

    Using Neal's forked beSch for my water shield display now... (missed that from my PB->oUF conversion)

    Till have to fix some things on the layout.. like cooldown spiral on buffs.. etc


    Hi, Great work on this UI and it has awesome textures. Right now Im using Pitbull with Sharedmedia. Where can I get the bar textures you are using? If they are available can u plz send me a link? Is there any special setup to get these textures, or is it just different unit frames and cast bar? Thanks for any help
    Posted in: General Chat
  • 0

    posted a message on EavesDrop 2.0 (a SCT style combat log)
    Hi, Great Mod!

    I have a small error, I do not want Eavesdrop showing reputation gains in the frame so I unchecked "reputation" option in the events tab. The reputation gains still show when Iam in BGs. I have'nt really paid attention to when Iam not in BGs so I don't know if it does the same thing. Is there any way to disable rep gains from showing completely? I dont know what else to try aside from unchecking the option. Thanks Alot!
    Posted in: General AddOns
  • 0

    posted a message on Bartender4 - Official Topic
    Quote from Nevcairiel »

    I commited a small fix that hopefully fixes your stance issue.

    For the ButtonFacade issue, the colors save fine for me .. can you try again with the latest version? Although i didnt really change anything in the ButtonFacade support code, but it just works for me *shrug*


    WOW both problems are fixed with the new version. Thanks so much for your time and help. Much apreciated.

    Btw great mod, Went from Bartender 3 to bongos 3 to bartender 4 and this is by far the best. Keep up the great work!
    Posted in: General AddOns
  • 0

    posted a message on Bartender4 - Official Topic
    Hi, I have a couple of questions. Iam using the latest Bartender4 and also ButtonFacade. Bartender dosent seem to be saving my settings with the caith skin for buttonfacade. I go into BF options and select caith from options and it changes the color (makes it a bit darker) and then i add the gloss. When I relog Its back to the old colors and gloss effects. I know that buttonfacade dosent save the settings from reading that post but shouldnt Bartender4 support and save this? The borders of the buttons are caith but the other settings dont save. Also My bar 1 in bartender4 changes to bar 7 when I stealth, so i went into options to make it not page the bar when stealthed and that dosent save either.

    Im using ver. 77185.0

    Apreciate any help, Thanks!
    Posted in: General AddOns
  • 0

    posted a message on UI Screenshots - Show us what you use!
    Here is my UI. Took me a while to set it up the way I wanted. The textures, buttons, buffs are all resized Caith to fit my UI. I have a 32" widescreen with an oddball resolution so I had to redo all from scratch to make it fit. I got some layout ideas from ace forums and the raid frames are also from someone posted on pitbull forums (sorry cant remember who lol). It may seem cluttered to some but I have a big enough screen to fit all this stuff. If you have any questions about the UI feel free to ask. Comments Welcome. Thanks





    Posted in: General Chat
  • To post a comment, please or register a new account.