• 0

    posted a message on [Grid] RaidDebuff
    I'm using the raiddebuff to show on border. Even though I change all 3 raid statuses to a certain color, it still is displaying as a certain color on some debuffs.
    Posted in: Grid & Grid2
  • 0

    posted a message on [Grid] RaidDebuff
    Is there a way to change border color for a debuff now? Before when it was under status I could choose the border color, but now if I enable raid debuff to show for borders, I don't have a choice what it shows. Problem is certain debuffs are using the same border colors as what I have for other aura/status's.
    Posted in: Grid & Grid2
  • 0

    posted a message on AutoBar by Toadkiller (official thread)
    Quote from Toadkiller »

    Wow, I don't know what to make of that. It should really be impossible for it to take 1 item from a stack and then refuse to do the rest. All I can think of is an addon tainting things perhaps? If you turn off "Filter Addon Mistakes" under the BugSack menu you will get warnings of blocked actions. Depending on your mods this may generate no, some or possibly a lot of errors.


    Had another BT raid last night, didn't get much chance to spam pots again. It did happen once though, on some random trash pull that turned into a long combat session since we got some accidental adds. Chugged a few pots and hit a clean new stack where button refused to work again. Had 60 mana pots at the time. Did as you said to check off the Filter Addon Mistakes but no error was popping up :( Again had to eventually pot from bags. Once combat ended, button was working again. ;_;
    Posted in: General AddOns
  • 0

    posted a message on AutoBar by Toadkiller (official thread)
    Hey sorry to be late, just to followup on the mana pot thing with regards to it not working. Ran into it again a few times in BT the other night, had my bags open at the same time so I could see if it was indeed because a start of a new stack or something and it didn't seem like that was the reason. One time it happened 'midstack' where the stack it was pulling from was still 3/5 and yet the button still didn't work :( Again, this thing never did pop an error message so I'm not sure what to do now. It's not a totally gamebreaker since I think myself and others that have seen it have almost grown used to it now :(
    Posted in: General AddOns
  • 0

    posted a message on AutoBar by Toadkiller (official thread)
    Yeah I didn't get a chance to test tonight, but will be in BT tomorrow night so I'll definitely keep an eye out to see what's causing the pot thing.
    Posted in: General AddOns
  • 0

    posted a message on AutoBar by Toadkiller (official thread)
    Quote from Toadkiller »

    You people are all actually using the version on wowace right now yes? Because I just tried this on my hunter Bliksem with just me, my pet Engel, some mana fish and a Wretched Fiend. Now the fish were on the popup, but i made it all stacks of exactly 1 b4 combat. It used the first stack of 1, I waited 2 minutes then used the next one by clicking. I tried it again with Crystal Mana Potion with stacks of different sizes (1 and 3) to see if that matters as well as from the main and not popup button. (The code is identical for both though). Next I could try with a starting stack of 2 3 4 or 5 but maybe someone could volunteer.

    Also please install both Buggrabber and Bugsack and turn off the Throttle at excessive amount setting since it retardedly can report no bugs if there are too many. Follow the debugging FAQ for some of these steps.


    Yup using the current version. But like another post said, it's been a problem for a while now, not something new. Just occured to post about it too while browsing the forums ;) I too have almost grown accustomed to potting from autobar for the first few then being prepared to open my bags when it doesn't work.

    I'll try to replicate again. I have both buggrabber/bugsack but there are no errors popping up when this happens. It just doesn't work.
    Posted in: General AddOns
  • 0

    posted a message on AutoBar by Toadkiller (official thread)
    Only mentioned the cooldown because there are cases when I'm chaindrinking pots as soon the cooldown is up. I'm pally healer usually assigned to MT and often I have to chaincast nonstop into overheals just to compensate for huge dmg spikes. So I always have an eye on the mana pot cooldown on the autobar button. The cooldown correctly appears on the button when I have to manually pot from the bags. Problem is there are times when it counts down, cooldown goes away (as in it's ready to use) and I hit the button and that's the problem. Sometimes nothing happens. I'm normally rolling with 40-60 mana pots too during a raid, so I know I have them. I see the right count too on the autobar.
    Posted in: General AddOns
  • 0

    posted a message on AutoBar by Toadkiller (official thread)
    Tried pushing padding to 3 and compensated to get my old look by shrinking the scale down a lot. Seemed to be better just from brief testing. Is this basically going to be the final solution for this? or just a temporary workaround until it's figured out what's wrong?

    Also, on some raids my mana pot button (not sure if this happens to other buttons, mana pot is the one I use a lot as healer) seems to just stop working. I can see the cooldown, and I'm not trying to use a popup, still the same pot as the last use. But when I hit the button several times, nothing happens, I eventually have to open my bags up and click the pot manually. Luckily I'm an Alch/Herb and I make a ton of pots beforehand so they're easy to spot. I notice this happening during long fights since in the beginning when I pot early and often, seems ok, but in the later stages of fights, I have to manually pot from bags at times. Is perhaps because I do pot early and often that autobar gets confused because I actually went through the whole stack in one combat session and can't find the pots anymore even tho they actually are still there in other stacks?
    Posted in: General AddOns
  • 0

    posted a message on Bartender4 - Official Topic
    Thx for all the hardwork, can't wait for the fade until mouseover though. Probably the only thing holding me back from switching from bt3 atm since I use the hidden bars to hold my raid macros/quest items that I have to constantly pull out and swap out onto my main bar depending on the situation.
    Posted in: General AddOns
  • 0

    posted a message on AutoBar by Toadkiller (official thread)
    I do play in maximized window mode, will test tonight to see if it still happens if I go fullscreen mode. Although my autobar bars/buttons aren't right on the edge though :(


    EDIT: turned off windowed mode and still getting the popup problem still
    Posted in: General AddOns
  • 0

    posted a message on AutoBar by Toadkiller (official thread)
    Phew thought I was the only one with that problem when I posted it a few days ago and no one said anything about it.

    Yeah really annoying is when you try to mouseover it again to get it to disappear, then accidently mouseover another button that also remains stuck, then you mouseover that one again to get it to go away and it's like a domino effect ><
    Posted in: General AddOns
  • 0

    posted a message on AutoBar by Toadkiller (official thread)
    Quote from uaxli »

    with the ltest revision i have problems with positioning (its broken). When i press "move bars" - the green "draggable area" is TOO long, and all my buttons take only 2/10 of its space. Cause green thingy is too huge, i cant move my bars to the right... (tried SV clearing)


    actually ironically enough i have the exact opposite problem where my green drag area is too small, it's hidden behind my bar so I basically have to constantly increase the padding, move, then decrease the padding again. I miss the old drag circle button from before.

    Another problem I've noticed the last few days is some of buttons wont close when I mouseoff it, i have to mouseover it again and then off again to get some to disappear.
    Posted in: General AddOns
  • 0

    posted a message on AutoBar by Toadkiller (official thread)
    Just updated to version 70827 and profiles seem to be missing?
    Posted in: General AddOns
  • 0

    posted a message on GridAlert
    Yeah I basically get that same thing. What happens is everytime you want to switch a profile, you get that. And then you have to actually do a manual UI reload to get the profiles to switch. As a result it breaks other grid addons that help you with profile swapping on the fly if enabled.
    Posted in: Grid & Grid2
  • 0

    posted a message on GridAlert
    Has this addon been abandoned? The changing of profiles causes an error everytime now since 2.4 with gridalert enabled.
    Posted in: Grid & Grid2
  • To post a comment, please or register a new account.