• 0

    posted a message on ClassTimer - Official thread
    Is there an option in classtimer ATM to change the bar color when there is x amount of time left? If not would that be possible to code that in as it could be very handy and I havn't found a way to do it as of yet.

    Good example would be using Rampage for the Sticky bar and I would like the bar color to change from the Blue to a deep Red when there is 10 seconds left.

    Thanks :)
    Posted in: General AddOns
  • 0

    posted a message on Error With 1.9.46.743
    1.9.46.743

    Ive uninstalled/reinstalled from the WAU page and still get the same issue as this guy is having where it just loops with error messages.
    Posted in: Updaters
  • 0

    posted a message on BigWigs_KalecgosPortals
    Timers for the individuals would make this A+.
    Posted in: Raid AddOns
  • 0

    posted a message on UnderHood Official Thread
    Quote from Anadale »

    Can you please provide more information? Your class and ability you use would be enough. Thank you.


    Warrior, any ability on my action bars (Using Bartender2 atm) such as Bloodthirst or Whirlwind for example will cause the Hud Bars to "Flash" upon keypress.
    Posted in: General AddOns
  • 0

    posted a message on UnderHood Official Thread
    Maybe I have something misconfigured but when I hit a keybinding for an ability my Health/Power along with Target Health/Power bars will flash; Is there any way to keep this from happening?
    Posted in: General AddOns
  • 0

    posted a message on UnderHood Official Thread
    This may have already been mentioned (I know something about rogue energy was). Rage is not working for the Player Power bar; the text works fine however.
    Posted in: General AddOns
  • 0

    posted a message on Librameister - A libram switcher
    Found a bug, currently it wont equip the "Check for Blessing of Light" libram on targets Other than yourself, etc a town Guard with Blessing of Light.

    Looked in the lua file and solved the problem by simply uncommenting the code:
    		local cnt = 0
    		if unit == UnitName("mouseover") then
    			unit = "mouseover"
    		elseif unit == UnitName("player") then
    			unit = "player"
    		elseif unit == UnitName("target") then
    			unit = "target"
    		elseif unit == UnitName("focus") then
    			unit = "focus"
    		elseif unit == UnitName("targettarget") then
    			unit = "targettarget"
    		else
    			for cnt=1,5 do
    				if unit == UnitName("party" .. cnt) then
    					unit = "party" .. cnt
    				end
    			end
    			
    		end


    And it started working; came across this bug when trying to place a 10min BoL on someone (not in a group) and the addon wouldn't detect that they had the buff, would instead just default back to using either my FoL or HL libram based on the heal.
    Posted in: General AddOns
  • 0

    posted a message on Violation
    Quote from teedog »

    Quote from serus »

    - a feature to reset viol when a sws reset vote is passed

    Why? One of the most important reasons I choose to use Violation over SWS is because I like to reset whenever I want to. Whether you reset or not has no effect on SWS users. If you want to reset when they do, reset it yourself. I don't want SWS users to reset my meters.


    Doesn't Violation have it's Own "Group/Raid"-wide reset option that you can toggle on and off; idea being that its allowing a single person to issue global resets for everyone? (granted they are assist/raidleader)

    My point being.. it wouldn't be Such a leap of difference to support SWS Reset Votes, from which you could toggle it on/off. Would I like the feature? yes.. is it a big deal? no.. why? Cause I hopefully can get most of my guildmates to transfer to Violation eventually.

    If ammo's ruled it out already, then thats that; no point in bugging him about it ;p
    Posted in: General AddOns
  • 0

    posted a message on Violation
    Was the suggestion of monitoring data Only while in combat considered? From a resource perspective that would save some yes?
    Posted in: General AddOns
  • 0

    posted a message on Violation
    I have a suggestion (please disregard if already mentioned).

    Would it be possible to implement Not recording any data Unless You/Group/Raid is in combat for atleast x amount of secs or something of that nature as SWSTATS and such do?

    As it is now, it seems to really clutter up the meters with meaningless data inbetween pulls when people are healing up after rezzing, or killing critters etc...

    Would Really Appreciate atleast a toggle of some sort, hopefully make it default.

    Ps. Also maybe implement the ability for Violation to accept Resets from SWSTATS as well if we have the module enabled? In our raid setups I havn't gotten the majority to switch yet.. so it would be helpful to keep synced with them as much as possible, and accepting raid resets would go a long way with that.

    Thanks.
    Posted in: General AddOns
  • 0

    posted a message on Quartz: Modular Casting Bar
    Quote from Skyboat »

    Quote from Trigunflame »

    Is there anyway for the debuff display to show the stacks of it on the icon like a traditional debuff timer?

    For me, as of right now for example say I scorch on my mage, and i'm trying to stack fire vulnerability to 5; the debuff display works fine in showing me how much longer I have until the entire debuff drops; but I have to actually watch my unitframes to see how many stacks I have up while doing so.

    In short.. anyway to throw up a number on the icon or elsewhere to make it ez to view stack count on debuffs?


    That's weird, I see debuff count on my Quartz bars on both Shadow Bolt Vulnerabilities and Holy Vengeance.


    Ah. text was so small, i noticed it showing up as (2), (3) etc.. to the right of the debuff text instead of overlayed on the icon; either way works fine. just needed to up the font so i could see it a bit better.
    Posted in: General AddOns
  • 0

    posted a message on Quartz: Modular Casting Bar
    Is there anyway for the debuff display to show the stacks of it on the icon like a traditional debuff timer?

    For me, as of right now for example say I scorch on my mage, and i'm trying to stack fire vulnerability to 5; the debuff display works fine in showing me how much longer I have until the entire debuff drops; but I have to actually watch my unitframes to see how many stacks I have up while doing so.

    In short.. anyway to throw up a number on the icon or elsewhere to make it ez to view stack count on debuffs?
    Posted in: General AddOns
  • 0

    posted a message on eeMon - emergency monitor
    Where all the text should be displayed ie. people, as well as the title itself i get ... instead, any idea whats causing this?

    Edit. removed savedvariable for it and its mysteriously fixed.
    Posted in: General AddOns
  • 0

    posted a message on BigWigs
    BTW, we FINALLY downed them, in part thanks to you. :)
    Posted in: Raid AddOns
  • 0

    posted a message on BigWigs
    *HUGS RABBIT*

    IT WORKS !!!!!!!!!!!!!!!!!!!!

    TWIN EMPS TIMERS FTW.
    Posted in: Raid AddOns
  • To post a comment, please or register a new account.