Im trying for alot hours how to make this setup with my unit frame and all i got was mana on bottom and health on middle, i need to put both in the middle to fit in my interface, there`s anyway to do it?
to
thanks in advance!:D
Make them a single tag in dogtags, or just place both tags in middle in the text layout setting and place the second one after the first.
I really don't know if it's working as intended, but
Today i first time tried 4.0 after being user of 3.0 for a long time.
Two thing that stopped me from switching right away:
1. I couldn't make bar (power bar, if it depends) very-very thin, even setting it to 1 still makes it rather thick, compared to 3.0 bar, set to 1.
Here's my current layout with 3.0 for more clear understanding:
2. I couldn't turn off the border on auras and couldn't change their size either, guess it's a bug
Otherwise 4.0 is awesome, thanks for your great work.
I really don't know if it's working as intended, but
Today i first time tried 4.0 after being user of 3.0 for a long time.
Two thing that stopped me from switching right away:
1. I couldn't make bar (power bar, if it depends) very-very thin, even setting it to 1 still makes it rather thick, compared to 3.0 bar, set to 1.
Here's my current layout with 3.0 for more clear understanding:
2. I couldn't turn off the border on auras and couldn't change their size either, guess it's a bug
Otherwise 4.0 is awesome, thanks for your great work.
1: The thickness if the bar at settng 1 is relative to the thicknes of the other bars. raise the number on the healthbar and the manabar will become thinner.
ie, if you have mp set to 1 and hp set to 4 the mp bar will use 1/5 of the total but if you increase hp to for instance 7 the mp bar will use 1/8th of the total
Is there a way to toggle party/raid frames in arenas? For example, I prefer to use Gladius for arenas and would like to to turn off Pitbull just when inside.
Long time user of pitbull here, just switched to (test) pitbull 4.0 and decided I'd try to do something "different" with my UI.
Basically, I want this:
[ health ] [ blank ] [ power ]
I'd prefer health to drain from left to right, and power to drain from right to left.
I've tweaked every small setting I could find, but at best, I'm able to drain them from top to bottom with the above setup..
i'm having trouble finding where to turn icons off for my raid frames, i just want debuffs i can cure to cause the frames to hightlight, i don't want icon clutter
also my offspec is resto, is there support for curses showing up as curable for resto, but not for enhance/elemental?
first of all, a question about the unit-arrangement of a 25-man raid.
So right now, if I create a group and arrange it by choosing "raid group" and allow 5 units per column, I'll get 5 columns with 5 units in each column ("gridlike"). So far everything is fine. If now a unit from group 2 leaves the raidgroup all following units are shifted and in the fifth column one unit is missing instead of one missing member in the second column. So is there a possibility to arrange the units in a 25-man raid by group without the shifting?
Furthermore is it possible to arrange the pets in the same way as I don't want it to be for the raid units? :D So if I have 2 hunters in group 3, a WL in group 4 and a DK in group 2 all their pets should be shown directly among each other, instead of showing it in the corresponding groups of their owners.
How does the current state of PB4 compare to agUF in terms of features and performance? I'm currently using agUF, having switched over to it back in TBC because PB3 got too heavyweight (probably partially because of DogTag though) and because I wanted to ditch Rock :p
...is there a possibility to arrange the units in a 25-man raid by group without the shifting?
You'll likely need to make several groups (one for each party, in fact). Tell each of these to only show members of individual raid groups. Then players will stay in their groups. I don't think there's an easier way to do this, but at least you can let all of your groups use the same Layout.
How does the current state of PB4 compare to agUF in terms of features and performance? I'm currently using agUF, having switched over to it back in TBC because PB3 got too heavyweight (probably partially because of DogTag though) and because I wanted to ditch Rock :p
Well, Pitbull4 doesn't have Rock (yay!). DogTag is still used exclusively for text labels, but the way has been made (at least partially) for other text providers. Maybe after it hits the release milestone we'll see lightweight alternatives offered.
I'm pretty sure that PB4 is pre-optimization, but it's not exactly slow either. I'd say PB4 can now do anything agUF can do. I've been using it since early-alpha and I stopped wishfully looking back at Pitbull3 months ago.
You'll likely need to make several groups (one for each party, in fact). Tell each of these to only show members of individual raid groups. Then players will stay in their groups. I don't think there's an easier way to do this, but at least you can let all of your groups use the same Layout.
Ok, thanks, I had the same idea, so if there's no other way I'll do it like this.
Easy, just do the opposite of the above. Make a single group, and tell it to show pets from all groups. They'll all be lumped together.
That's my configuration right now,and it's not working for me. I created a group, used "Raid pets" as "Unit group" and tried every single "Sort method" in combination with every single Filter type. The pets are always spread out all over the screen with big spaces in between e.g. when I enter AV or in a 25-man raid.
Not sure if its been asked recently (or at all) but is there any ETA on the raid frames? If they're implemented already I must be blind or something as I can't find them.
for one, today i grouped up for the argent dailies, and the dragon one went fine, i saw the 4 guys in my group and one was a warlock and his pet showed up where i had pet frames at. then i left group and did the horse vehicle ones by the castle, and grouped up for that, but the group members didn't appear. I dunno why
is there a way to leave the HP as 0/20k or whatever it is all the time, but have a line right below that that would either show % of Hp when the target is alive, or "dead/ghost" when they're dead?
and can i have this happen in pitbull 4, with the damage taken on the right side of my party frames? had it like this with my old pitbull setup: http://img207.imageshack.us/img207/5466/pitbullold.jpg
(i want the current HP max to stay where it is in my new setup, like shown in the next screenshot, and ADD this additional HP text on the right side of the frame...is that possible?
and for buffs/debuffs on my target...I'm not 100% sure what i want this to look like, any suggestions? so far i have buffs on the bottom right, and debuffs on the top right, like so:
buffs: http://img261.imageshack.us/img261/6171/pit3.jpg
(i cast the pumpkin head item, hence the double size on the icon)
(and like I mentioned earlier, I also want the % of the target's HP to show up on a line right below the current HP values shown, so on this picture i'd see a 100% below the 42k/42k)
debuffs: http://img412.imageshack.us/img412/6753/pit2.jpg
(the red text i wrote is where buffs show up, and they grow upwards but I didn't take screenshots of the buff/debuff interaction, unfortunately)
i want buffs to hug the right side of the bar going down halfway, then start a new column to the right side heading down, with columns keeping on scooting right
and buffs to hug the right side working up until the halfway mark, then scooting right one column and going up again, repeating until they reach the cap i set on buffs to show
Hello again, there`s any way to only show 40 man layout when raid has exacly 40 man? how we raid everyday, theres 25 player + some replaces in raid and had to desactive 40 man layout coz when more than 25 it show up as 40 man...
for one, today i grouped up for the argent dailies, and the dragon one went fine, i saw the 4 guys in my group and one was a warlock and his pet showed up where i had pet frames at. then i left group and did the horse vehicle ones by the castle, and grouped up for that, but the group members didn't appear. I dunno why
is there a way to leave the HP as 0/20k or whatever it is all the time, but have a line right below that that would either show % of Hp when the target is alive, or "dead/ghost" when they're dead?
2: and can i have this happen in pitbull 4, with the damage taken on the right side of my party frames? had it like this with my old pitbull setup: http://img207.imageshack.us/img207/5466/pitbullold.jpg
(i want the current HP max to stay where it is in my new setup, like shown in the next screenshot, and ADD this additional HP text on the right side of the frame...is that possible?
All of this is managed by the dogtag texts.
1: change the tag for HP to not include status, and make a separate status text.
1.5: Ti add % display just create a new text with HP% selected as preset (Maybe have this one show the status aswell?)
and for buffs/debuffs on my target...I'm not 100% sure what i want this to look like, any suggestions? so far i have buffs on the bottom right, and debuffs on the top right, like so:
buffs: http://img261.imageshack.us/img261/6171/pit3.jpg
(i cast the pumpkin head item, hence the double size on the icon)
(and like I mentioned earlier, I also want the % of the target's HP to show up on a line right below the current HP values shown, so on this picture i'd see a 100% below the 42k/42k)
debuffs: http://img412.imageshack.us/img412/6753/pit2.jpg
(the red text i wrote is where buffs show up, and they grow upwards but I didn't take screenshots of the buff/debuff interaction, unfortunately)
i want buffs to hug the right side of the bar going down halfway, then start a new column to the right side heading down, with columns keeping on scooting right
and buffs to hug the right side working up until the halfway mark, then scooting right one column and going up again, repeating until they reach the cap i set on buffs to show
For the %HP look above.
For filters liik closel under the buff/debuff layout tabs. I think the amount of space used by each type together with sorting and anchors should do the trick.
Anyone else getting strange behavior when doing the tournament dailies?
I keep getting my char and pet info swapped.
ie my stats/HP and so shows as my petbar, and my mounts stats and HP are showed as my character. Also on petframe bith mine, and my mounts buffs are shown.
Rollback Post to RevisionRollBack
To post a comment, please login or register a new account.
Make them a single tag in dogtags, or just place both tags in middle in the text layout setting and place the second one after the first.
im not a very good programer boy, but with this its done!!! thanks alot!!!!
/kiss /hug
Today i first time tried 4.0 after being user of 3.0 for a long time.
Two thing that stopped me from switching right away:
1. I couldn't make bar (power bar, if it depends) very-very thin, even setting it to 1 still makes it rather thick, compared to 3.0 bar, set to 1.
Here's my current layout with 3.0 for more clear understanding:
2. I couldn't turn off the border on auras and couldn't change their size either, guess it's a bug
Otherwise 4.0 is awesome, thanks for your great work.
1: The thickness if the bar at settng 1 is relative to the thicknes of the other bars. raise the number on the healthbar and the manabar will become thinner.
ie, if you have mp set to 1 and hp set to 4 the mp bar will use 1/5 of the total but if you increase hp to for instance 7 the mp bar will use 1/8th of the total
Long time user of pitbull here, just switched to (test) pitbull 4.0 and decided I'd try to do something "different" with my UI.
Basically, I want this:
[ health ] [ blank ] [ power ]
I'd prefer health to drain from left to right, and power to drain from right to left.
I've tweaked every small setting I could find, but at best, I'm able to drain them from top to bottom with the above setup..
Anyone here that could help me?
http://img142.imageshack.us/img142/5843/wowscrnshot042709184950.jpg
i'm having trouble finding where to turn icons off for my raid frames, i just want debuffs i can cure to cause the frames to hightlight, i don't want icon clutter
also my offspec is resto, is there support for curses showing up as curable for resto, but not for enhance/elemental?
first of all, a question about the unit-arrangement of a 25-man raid.
So right now, if I create a group and arrange it by choosing "raid group" and allow 5 units per column, I'll get 5 columns with 5 units in each column ("gridlike"). So far everything is fine. If now a unit from group 2 leaves the raidgroup all following units are shifted and in the fifth column one unit is missing instead of one missing member in the second column. So is there a possibility to arrange the units in a 25-man raid by group without the shifting?
Furthermore is it possible to arrange the pets in the same way as I don't want it to be for the raid units? :D So if I have 2 hunters in group 3, a WL in group 4 and a DK in group 2 all their pets should be shown directly among each other, instead of showing it in the corresponding groups of their owners.
You'll likely need to make several groups (one for each party, in fact). Tell each of these to only show members of individual raid groups. Then players will stay in their groups. I don't think there's an easier way to do this, but at least you can let all of your groups use the same Layout.
Easy, just do the opposite of the above. Make a single group, and tell it to show pets from all groups. They'll all be lumped together.
Well, Pitbull4 doesn't have Rock (yay!). DogTag is still used exclusively for text labels, but the way has been made (at least partially) for other text providers. Maybe after it hits the release milestone we'll see lightweight alternatives offered.
I'm pretty sure that PB4 is pre-optimization, but it's not exactly slow either. I'd say PB4 can now do anything agUF can do. I've been using it since early-alpha and I stopped wishfully looking back at Pitbull3 months ago.
Ok, thanks, I had the same idea, so if there's no other way I'll do it like this.
That's my configuration right now,and it's not working for me. I created a group, used "Raid pets" as "Unit group" and tried every single "Sort method" in combination with every single Filter type. The pets are always spread out all over the screen with big spaces in between e.g. when I enter AV or in a 25-man raid.
EDIT: Nevermind, I'm blind and dumb!
for one, today i grouped up for the argent dailies, and the dragon one went fine, i saw the 4 guys in my group and one was a warlock and his pet showed up where i had pet frames at. then i left group and did the horse vehicle ones by the castle, and grouped up for that, but the group members didn't appear. I dunno why
also, when people die their HP number stops displaying HP and just says "ghost", like so:
http://img410.imageshack.us/img410/5030/pit1.jpg
is there a way to leave the HP as 0/20k or whatever it is all the time, but have a line right below that that would either show % of Hp when the target is alive, or "dead/ghost" when they're dead?
and can i have this happen in pitbull 4, with the damage taken on the right side of my party frames? had it like this with my old pitbull setup:
http://img207.imageshack.us/img207/5466/pitbullold.jpg
(i want the current HP max to stay where it is in my new setup, like shown in the next screenshot, and ADD this additional HP text on the right side of the frame...is that possible?
and for buffs/debuffs on my target...I'm not 100% sure what i want this to look like, any suggestions? so far i have buffs on the bottom right, and debuffs on the top right, like so:
buffs:
http://img261.imageshack.us/img261/6171/pit3.jpg
(i cast the pumpkin head item, hence the double size on the icon)
(and like I mentioned earlier, I also want the % of the target's HP to show up on a line right below the current HP values shown, so on this picture i'd see a 100% below the 42k/42k)
debuffs:
http://img412.imageshack.us/img412/6753/pit2.jpg
(the red text i wrote is where buffs show up, and they grow upwards but I didn't take screenshots of the buff/debuff interaction, unfortunately)
i want buffs to hug the right side of the bar going down halfway, then start a new column to the right side heading down, with columns keeping on scooting right
and buffs to hug the right side working up until the halfway mark, then scooting right one column and going up again, repeating until they reach the cap i set on buffs to show
Thanks in advance!
Keep the wonderfull work!
This one i don't know about
All of this is managed by the dogtag texts.
1: change the tag for HP to not include status, and make a separate status text.
1.5: Ti add % display just create a new text with HP% selected as preset (Maybe have this one show the status aswell?)
2: Enable the combattext in texts.
For the %HP look above.
For filters liik closel under the buff/debuff layout tabs. I think the amount of space used by each type together with sorting and anchors should do the trick.
There should be sliders for that under the buffs and debuffs tabs
I keep getting my char and pet info swapped.
ie my stats/HP and so shows as my petbar, and my mounts stats and HP are showed as my character. Also on petframe bith mine, and my mounts buffs are shown.