This isn't much help but I encountered the same errors, it appears to do with the irregular sizing of the fonts in the MoviePoster font, thats as far as I could narrow it down.
If you clear your savedvariables for Pitbull and try to import Sav's layout again, however, before you do this log into the game with your cleared savedvariables and set the Global Setting for Font size to 12 or lower. For some reason anything larger would throw out a multitude of errors. After you get the layout imported and working, although with tiny fonts that you can barely read, you can go ahead and adjust the size from there and shouldn't get the errors.
This may or may not be the reason this is happening and I could have just gotten lucky and fixed a different problem at the same time and didn't realize it but this is what worked for me.
{
name = "Xakath",
pbRevision = 43080,
bars = {
blankSpace = {
hidden = true,
position = 7
},
castBar = {
position = 8
},
expBar = {
position = 4
},
healthBar = {
height = 4,
position = 2
},
portrait = {
position = 1,
side = "left"
},
powerBar = {
height = 4,
position = 3
},
repBar = {
position = 5
},
threatBar = {
position = 6
}
},
icons = {
combatIcon = {
position = "frame-edgebottomleft"
},
leaderIcon = {
position = "frame-edgetopleft"
},
masterIcon = {
position = "frame-edgetopleft"
},
pvpIcon = {
position = "frame-edgetopright"
},
raidTargetIcon = {
position = "frame-edgetop"
},
restIcon = {
position = "frame-edgebottomleft"
}
},
texts = {
Class = {
custom = "[Classification] [Level:DifficultyColor] [SmartClass:ClassColor] [DruidForm:Paren] [SmartRace]",
position = "powerBar-left",
style = "Standard",
styleType = "class"
},
combatText = {
position = "frame-center"
},
Combo = {
position = "frame-outleft",
style = "Standard",
styleType = "combo"
},
Experience = {
position = "expBar-center",
style = "Standard",
styleType = "experience"
},
Health = {
custom = "[~Status?FractionalHP:Short] |||| [Status:PercentHP:Percent]",
position = "healthBar-right",
size = 1.15,
style = "Absolute and Percent",
styleType = "health"
},
Name = {
custom = "[Name]",
position = "healthBar-left",
size = 1.65,
style = "Standard",
styleType = "name"
},
Power = {
custom = "[~Status?FractionalMP:Short] || [Status:PercentMP:Percent]",
position = "powerBar-right",
styleType = "power"
},
Threat = {
custom = "[Threat]/[MaxThreat]",
position = "threatBar-right",
style = "Absolute Short",
styleType = "threat"
}
}
}
Edit: Dunno if this is the right place to ask it, but i've been working on my target frame to go with this. Is there anyway to make it so, if you have the buffs/debuffs set to "Top", there is a bit of space between the health bar, and the first row of debuffs? I'd like it if the buffs/debuffs were "floating" a bit, instead of appearing directly ontop of the frame. (Does that make sense? Dunno how well I explained that)
Edit2: How would I go about adding extra bar textures?
One thing I'm noticing is that the Sizing of the frame is not exported. This would make sense since the size (overall width, height, scale) would be up to the user. However, on some layouts this is a big deal. Adelea's does not look right if you apply it with the default frame size. I had to jack up the height on the frame and then scale it back down. Would it be too much to ask if people could post the frame width, height, and scale that they are using?
Also, this may be the wrong place for this but I just imported a ton of pitbull interfaces. When I logged off and logged back on they were all gone? Has anyone else had this happen? Did I forget to read a step somewhere?
Secondly, I am posting because I imported cralexns' awesome layout, the only issue I am having is when logging off and back in I lose the Name, Level and Race portion of the frame.
I can then re-import in the same session and the will be working without issue.
The texts are in the "texts" area as well as they are enabled.
Any ideas on this?
Thanks!
Attached is a picture of wootelf4 after a log out and in.
Secondly, I am posting because I imported cralexns' awesome layout, the only issue I am having is when logging off and back in I lose the Name, Level and Race portion of the frame.
I can then re-import in the same session and the will be working without issue.
The texts are in the "texts" area as well as they are enabled.
Any ideas on this?
Thanks!
Attached is a picture of wootelf4 after a log out and in.
If you clear your savedvariables for Pitbull and try to import Sav's layout again, however, before you do this log into the game with your cleared savedvariables and set the Global Setting for Font size to 12 or lower. For some reason anything larger would throw out a multitude of errors. After you get the layout imported and working, although with tiny fonts that you can barely read, you can go ahead and adjust the size from there and shouldn't get the errors.
This may or may not be the reason this is happening and I could have just gotten lucky and fixed a different problem at the same time and didn't realize it but this is what worked for me.
Might I ask what font that is you're using?
it's Emblem i believe.
I like :)
...
How would I go about "centering" the 3d portrait to something less..nose..y?
Yay thanks :) I can't get the anchoring done right for the eePanels though, frustrating.
Fixed the eePanel problem. Niagara is a life saver!
I can't get this to work, even after tweaking it. ;(
how is it not working? just looks like you need a texture+font switch
Edit: Dunno if this is the right place to ask it, but i've been working on my target frame to go with this. Is there anyway to make it so, if you have the buffs/debuffs set to "Top", there is a bit of space between the health bar, and the first row of debuffs? I'd like it if the buffs/debuffs were "floating" a bit, instead of appearing directly ontop of the frame. (Does that make sense? Dunno how well I explained that)
Edit2: How would I go about adding extra bar textures?
SharedMedia mod off the WoWAceUpdater. If you'd like to add your own, there is a file in that folder with instructions on what to do.
I'm wondering if it's a "dwarf thing" because I'm having similar problems with my priest.
Seems like most of my models are centered to low. A little bit annoying.
Also, this may be the wrong place for this but I just imported a ton of pitbull interfaces. When I logged off and logged back on they were all gone? Has anyone else had this happen? Did I forget to read a step somewhere?
-Alteff
Secondly, I am posting because I imported cralexns' awesome layout, the only issue I am having is when logging off and back in I lose the Name, Level and Race portion of the frame.
I can then re-import in the same session and the will be working without issue.
The texts are in the "texts" area as well as they are enabled.
Any ideas on this?
Thanks!
Attached is a picture of wootelf4 after a log out and in.
Enable the "blank" bar, this happened to me too