As people have asked a few times, is it likely that you're going to add vehicle buffs/debuffs to the big (de)buffs feature? I'd assume that when you enter a vehicle you could just get the GUID for the vehicle unit and then use that to determine which ones to make big.
This would be a really helpful feature not only for malygos, but also for flame leviathan now, trying to roll Pyrite stacks.
That should be working for the 3.0.3c release. It should have worked before, and indeed it did on PTR when I initially wrote it because the UnitBuff functions were giving the vehicle units as 'pet', but they changed it ofc ;)
Is there a way to see the remaining time for the debuffs on your target? I recall having them showing just some days ago but seem to have disappeared.
Would be glad for any help.
I got OmniCC installed also but it doesn't seem to help.
Is it possible to use click casting addons for a right mouse click in X-perl raid frames? Each time I try to this binding, the right mouse click continues to bring up an options menu rather than a bound cast. Works fine for other mouse clicks and other frames with the right mouse click, but not the raid frame.
Buffs and debuffs on my vehicle don't seem to be showing up correctly; For instance on the "Aces High" dragon vehicle, once applied the "Revivify" buff won't appear until I enter combat, (then begins to stack properly), but gives no timer, does not disappear when you lose the buff, and the Revivify buff icon displays a tooltip for the first debuff on my character (e.g. "Essence of Wintergrasp", "Fel armor," etc.) rather than for Revivify. This is an awfully annoying bug, especially in vehicle battles that rely on a close monitoring of a particular buff and reapplying it at specific intervals.
Confirming this problem continues in version 3.0.3c
Hello, I've much-less tried to read all pages of this topic for a solution to my problem, but sadly I couldn't find any.
The problem that I have is, when I click on "Bar Textures" on "Global" section of X Perl, I see all Bar Textures full gray. I can't change Bar Textures, here's an example photo for it.
Anyone knows how to fix this? Btw.. I've the latest version, and I tried to re-install it. I even deleted my WTF/Cache/WDB/Interface and even repaired WoW, still not working.
Hello, I've much-less tried to read all pages of this topic for a solution to my problem, but sadly I couldn't find any.
The problem that I have is, when I click on "Bar Textures" on "Global" section of X Perl, I see all Bar Textures full gray. I can't change Bar Textures, here's an example photo for it.
Anyone knows how to fix this? Btw.. I've the latest version, and I tried to re-install it. I even deleted my WTF/Cache/WDB/Interface and even repaired WoW, still not working.
Your link doesn't work at all.(404 File not found)
Try disabled all your UIs but X-Perl and Blizzard's, then try again.
I'm using the latest version and I am updating my addons with Curse Client regularly.
Did you try delete and backup your WTF directory then tried again?
And try don't use Curse Client, deleted your x-perl then go to wowace's X-Perl project page and download the r292 release.
(You should don't needed r293/r294, because it's only zhTW update.)
According to X-Perl's page on curse.com, replies here are more frequently checked, so I'll post here:
This addon has been missing a couple of things clear since 3.0. I even created tickets for them but they were ignored, and I'm not sure why:
1) Wild Growth is not included on HOT Counter (or HOTs for that matter) as one of the active HoTs on a target.
2) Unlike all other rez spells, the druid resurrect spell Revive does not update the raid frame when cast to advise that a resurrect is incoming. This is easily fixed with a single line of code, but that doesn't inform the rest of the raid of what I'm doing.
Neither of these additions would be hugely complicated, and they would both be immensely helpful. I'd sure love to see them actually be implemented.
is there an easy way to automate raid frame layout? I'd rather use X-perl's raid frames, but really like how grid has some good auto formats for aligning things and moving them around.
According to X-Perl's page on curse.com, replies here are more frequently checked, so I'll post here:
This addon has been missing a couple of things clear since 3.0. I even created tickets for them but they were ignored, and I'm not sure why:
1) Wild Growth is not included on HOT Counter (or HOTs for that matter) as one of the active HoTs on a target.
2) Unlike all other rez spells, the druid resurrect spell Revive does not update the raid frame when cast to advise that a resurrect is incoming. This is easily fixed with a single line of code, but that doesn't inform the rest of the raid of what I'm doing.
Neither of these additions would be hugely complicated, and they would both be immensely helpful. I'd sure love to see them actually be implemented.
None of the spells added for LK have been added, sadly. HoTs, rezzes, heals, shields... anything that triggers highlights, sparkles, counters or messages in X-Perl needs re-done. I do hope Zeksie reads this and has that planned, it's a tad overdue, this far from 3.0 release date now. I've looked into adding them myself (add would submit changes to help) but I'm not sure I'm not missing other places in the code where things need changed. It's a rather large addon, lol.
I use X-Perl for my raid healing frames on my Druid, and the sparkles are really handy for visually displaying the time left on hots. But I have the talent that extends my hots by 3 seconds and the sparkles don't realize it. So the sparkles end while there's still 3 seconds left on the hot.
Also, it would be nice if there were multiple sparkles lines, one for each hot. They could be right on top of each other but different colors for different ones. Like violet for rejuv, green for regrowth and the current color for lifebloom, etc.
And it would be nice of the hots counter could be set to just show the casters # of hots, or have two seperate numbers, casters and total hots.
xperl does not show the durations left on buffs not cast by the player this makes it more of a liability in pvp. the default ui has it but when i enable xperl I can no longer see this.
I have some minor problems with X-perl. When I mouse over my buffs/debuffs under my player portrait the tooltips do not appear. Also, when I right click on my portrait and focus target that way, I get an error. Lastly, I did Maly last night and noticed that the buffs/debuffs from my drake were not registering correctly on Maly. I enabled pet buffs/debuffs on target, but it still didn't work. HELP!
That should be working for the 3.0.3c release. It should have worked before, and indeed it did on PTR when I initially wrote it because the UnitBuff functions were giving the vehicle units as 'pet', but they changed it ofc ;)
Is there a way to see the remaining time for the debuffs on your target? I recall having them showing just some days ago but seem to have disappeared.
Would be glad for any help.
I got OmniCC installed also but it doesn't seem to help.
Yeh, I use Clique for that. Works lovely.
Confirming this problem continues in version 3.0.3c
Hello, I've much-less tried to read all pages of this topic for a solution to my problem, but sadly I couldn't find any.
The problem that I have is, when I click on "Bar Textures" on "Global" section of X Perl, I see all Bar Textures full gray. I can't change Bar Textures, here's an example photo for it.
http://img200.imageshack.us/img200/5...2109122722.jpg
Anyone knows how to fix this? Btw.. I've the latest version, and I tried to re-install it. I even deleted my WTF/Cache/WDB/Interface and even repaired WoW, still not working.
Your link doesn't work at all.(404 File not found)
Try disabled all your UIs but X-Perl and Blizzard's, then try again.
http://img38.imageshack.us/img38/683/wowscrnshot052409152115.jpg
By the way, I only use Xperl and QuestHelper, I deleted Quest Helper and re-installed Xperl, still it doesn't work.
I'm using the latest version and I am updating my addons with Curse Client regularly.
Yeah, that's X-Perl/Zeksie's problem
all r289-r294 releases are marked as r288. I'm using r294 now but it still displays r288.
EDIT : Oh shi-...I'm wrong. It displays r290 not r288... but still not match(I use r294).
Did you try delete and backup your WTF directory then tried again?
And try don't use Curse Client, deleted your x-perl then go to wowace's X-Perl project page and download the r292 release.
(You should don't needed r293/r294, because it's only zhTW update.)
line 2109
["bar"] = { ["texture"] = { "[B]yourtexture[/B]", -- [1] "[B]yourtexture path[/B]", -- [2] },And make sure that the path is valid
Wild guess in your case is you might had done a lot of addon install/delete which might cause the share texture path invalid
example case of path mess up: delete ORA2/ install ORA3
This addon has been missing a couple of things clear since 3.0. I even created tickets for them but they were ignored, and I'm not sure why:
1) Wild Growth is not included on HOT Counter (or HOTs for that matter) as one of the active HoTs on a target.
2) Unlike all other rez spells, the druid resurrect spell Revive does not update the raid frame when cast to advise that a resurrect is incoming. This is easily fixed with a single line of code, but that doesn't inform the rest of the raid of what I'm doing.
Neither of these additions would be hugely complicated, and they would both be immensely helpful. I'd sure love to see them actually be implemented.
Any help is appreciated!
Thanks in adavance.
-Ren
None of the spells added for LK have been added, sadly. HoTs, rezzes, heals, shields... anything that triggers highlights, sparkles, counters or messages in X-Perl needs re-done. I do hope Zeksie reads this and has that planned, it's a tad overdue, this far from 3.0 release date now. I've looked into adding them myself (add would submit changes to help) but I'm not sure I'm not missing other places in the code where things need changed. It's a rather large addon, lol.
I use X-Perl for my raid healing frames on my Druid, and the sparkles are really handy for visually displaying the time left on hots. But I have the talent that extends my hots by 3 seconds and the sparkles don't realize it. So the sparkles end while there's still 3 seconds left on the hot.
Also, it would be nice if there were multiple sparkles lines, one for each hot. They could be right on top of each other but different colors for different ones. Like violet for rejuv, green for regrowth and the current color for lifebloom, etc.
And it would be nice of the hots counter could be set to just show the casters # of hots, or have two seperate numbers, casters and total hots.
I have some minor problems with X-perl. When I mouse over my buffs/debuffs under my player portrait the tooltips do not appear. Also, when I right click on my portrait and focus target that way, I get an error. Lastly, I did Maly last night and noticed that the buffs/debuffs from my drake were not registering correctly on Maly. I enabled pet buffs/debuffs on target, but it still didn't work. HELP!
Thanks!