Yep just found it. Couldn't remember the name. Thanks.
With that said, I've been tweaking my layout, and I've come across an issue: If I set any of my bars to "Reverse", and have bar fading options enabled for that bar, the fading is always trying to take place in the normal left-to-right fashion, and thus ends up looking very odd and disjointed.
I can turn the fading off, but that's not really the effect I want.
[ -- REQUEST-- ]
I'd like to ask for the option to only show the timers on buffs for buffs that are mine. currently if i show all buffs on my target, it throws my framerate to all hell because of the timers that are on all of them. I think it's a related issue to the new UnitAura() change.
Is there a way to separate the party frames? I used to use mazzle and liked the layout used for party and target frames. Basically I want two party members on the left, target in the middle and other two party frames on the right. Currently not able to figure out how to do it.
[ -- REQUEST-- ]
I'd like to ask for the option to only show the timers on buffs for buffs that are mine. currently if i show all buffs on my target, it throws my framerate to all hell because of the timers that are on all of them. I think it's a related issue to the new UnitAura() change.
Yeah this would be great, don't really care about other players' debuff timers on the target just my own. I'm pretty sure this was the behaviour before the recent patch too.
This was only the behaviour before 3.0 because the API didn't actually give up any of that extra information. Nowadays it's the same call, and it returns everything, even if you aren't responsible for the Buff/Debuff.
I can see how an option to ignore the timing of other peoples' effects would be pretty nice, though.
EDIT:
I noticed in the changelog that talents are being quizzed before deciding what kinds of effects can be dispelled. If this hasn't already been taken into account, I believe Warlocks are now completely unable to cleanse/cure/dispell unless they have the Demonic Empowerment ability (and it only applies to the pet).
The three -'s in front of the lines will make them ignored. Deleting the lines should work just as well :)
tip: Two dashes ( -- ) already make a comment, with the third just being the first character of your comment ;)
-- makes for 1 line of comment (the rest of the line)
--[[ and ]]-- make for everything in between being commented.
Getting this error when I mouse over target of target while in a raid and in combat. Can't figure it out.
I am getting this as well with the added effect of breaking my glyphs. My enhanced scorch starts not working after I get this error and works again after I relog. I have recreated this multiple times.
I am getting this as well with the added effect of breaking my glyphs. My enhanced scorch starts not working after I get this error and works again after I relog. I have recreated this multiple times.
I've had the same problem. I tracked it down to WoW's new built-in threat tooltip system.
You'll need to go into Interface > Display > Display Aggro Warning set to Never.
I've got an issue myself with PitBull, this one is to do with setting a focus. Any time I try to I get this error:
"PitBull has been blocked from an action only available to the Blizzard UI. You can disable this addon or reload the UI."
I did some bughunting with ACP and buggrabber, its definitely PitBull (Only addon that I had running). Buggrabber reports this error:
"1. <event>ADDON_ACTION_BLOCKED:AddON 'PitBull' tried to call the protected function 'FocusUnit()'.
<in C code>: in function 'FocusUnit'
Interface\FrameXML\UnitPopup.lua:1181: in function 'func':
Interface\FameXML\UIDropDownMenu.lua:568: in function 'UIDropDownMenuButton_OnClick':
<string>:"*:OnClick":1:in function <[string "*:OnClick"]:1>"
Seeing the UIDropDownMenu bit I tried /focus. This worked but is there any way to set a focus without having to type in /focus or have yet another button and not get an error?
No Feragore. The menu setting focus issue is an acknowledged bug in the default UI code and will be fixed in 3.0.3. This affects more than just Pitbull, it affects all addons that use UIDropDownMenu.
I have a nice little party setup for my paladin, but there's one thing missing. I would like the numbers of power to automatically be in the "right color": blue for mana, red for rage and yellow for energy. Can that be done with a dogtag I never heard of before? :)
I am having an issue in Pitbull 3.0. I am attempting to configure unit frames when in "Party" mode. Any drop-down lists under "All Units" will not change their selection. For example, let's say you're trying to change the Health format from Absolute to Absolute Short. If I go under All Units/Texts/Health, the format choice for Absolute Short is listed. If I expand the list and click Absolute Short, the listbox does not change its value. If I then go to a single unit frame, i.e., Player/Target/Party, and do the same action, the type changes. What is weird is that if I change said option Player and then go to All Units, the option is changed.
Please note that this only seems to happen on listboxes under All Units. Sliders, text boxes, and other forms of input do not seem to have this issue. I was not sure if this was a bug or a recent change to Pitbull that I was not aware of.
with new 3.0.2 patch, i suppose new option when right-click player or target frame to set focus.
anyway, when i do that, one exception from blizzard ask me disable or ignore addon pitbull. so i need to continue type /set focus when targeting to set me focus and can't right click.
The best I think you'll be able to manage is setting the group to horizontal layout and increasing the space between them. But then you'll have 2 extra spaces (1-2, 3-4) to occupy.
On a somewhat related note, is there a way to remove the space between the bars? I'd prefer my Health and Power bars to be flush, but no matter what I try there is always 1 or 2 pixels in between.
Been using PitBull for what seems forever, best unit frames ever. :cool:
Did have a weird issue yesterday though I thought I'd mention ... a few days after the 3.0.2 patch I (naturally) downloaded PitBull and reconfigured all my unit frames to taste. Everything worked fine, as usual.
Yesterday I played my Priest for a couple hours, no issues; then I logged out, logged in to my Hunter, and *all* of my unit (player, target, party, focus, you name it) 'power' bars were gone ... instead of, say, a 50px health bar over a 50px mana/power/rage bar, there was just one huge 100px health bar, no power bar in sight.
I logged back to my Priest and a couple other characters, all had the same issue. Power bars were enabled under 'Modules', but on individual frame options, where they usually show up just below the Health bar options, there was nothing.
Luckily I back up all my AddOn settings once a week or so, I simply copied over my 'savedvariables/Pitbull.lua' from the archived version and everything was fine again. But it struck me odd how it came out of the blue like that, I wasn't fiddling around with anything, just logged to a different character and *poof*.
Rollback Post to RevisionRollBack
To post a comment, please login or register a new account.
With that said, I've been tweaking my layout, and I've come across an issue: If I set any of my bars to "Reverse", and have bar fading options enabled for that bar, the fading is always trying to take place in the normal left-to-right fashion, and thus ends up looking very odd and disjointed.
I can turn the fading off, but that's not really the effect I want.
Same
Same
+1
Yeah this would be great, don't really care about other players' debuff timers on the target just my own. I'm pretty sure this was the behaviour before the recent patch too.
-
View User Profile
-
View Posts
-
Send Message
Curse PremiumI can see how an option to ignore the timing of other peoples' effects would be pretty nice, though.
EDIT:
I noticed in the changelog that talents are being quizzed before deciding what kinds of effects can be dispelled. If this hasn't already been taken into account, I believe Warlocks are now completely unable to cleanse/cure/dispell unless they have the Demonic Empowerment ability (and it only applies to the pet).
tip: Two dashes ( -- ) already make a comment, with the third just being the first character of your comment ;)
-- makes for 1 line of comment (the rest of the line)
--[[ and ]]-- make for everything in between being commented.
I am getting this as well with the added effect of breaking my glyphs. My enhanced scorch starts not working after I get this error and works again after I relog. I have recreated this multiple times.
I've had the same problem. I tracked it down to WoW's new built-in threat tooltip system.
You'll need to go into Interface > Display > Display Aggro Warning set to Never.
I've got an issue myself with PitBull, this one is to do with setting a focus. Any time I try to I get this error:
"PitBull has been blocked from an action only available to the Blizzard UI. You can disable this addon or reload the UI."
I did some bughunting with ACP and buggrabber, its definitely PitBull (Only addon that I had running). Buggrabber reports this error:
"1. <event>ADDON_ACTION_BLOCKED:AddON 'PitBull' tried to call the protected function 'FocusUnit()'.
<in C code>: in function 'FocusUnit'
Interface\FrameXML\UnitPopup.lua:1181: in function 'func':
Interface\FameXML\UIDropDownMenu.lua:568: in function 'UIDropDownMenuButton_OnClick':
<string>:"*:OnClick":1:in function <[string "*:OnClick"]:1>"
Seeing the UIDropDownMenu bit I tried /focus. This worked but is there any way to set a focus without having to type in /focus or have yet another button and not get an error?
-
View User Profile
-
View Posts
-
Send Message
Curse PremiumI have a nice little party setup for my paladin, but there's one thing missing. I would like the numbers of power to automatically be in the "right color": blue for mana, red for rage and yellow for energy. Can that be done with a dogtag I never heard of before? :)
Please note that this only seems to happen on listboxes under All Units. Sliders, text boxes, and other forms of input do not seem to have this issue. I was not sure if this was a bug or a recent change to Pitbull that I was not aware of.
anyway, when i do that, one exception from blizzard ask me disable or ignore addon pitbull. so i need to continue type /set focus when targeting to set me focus and can't right click.
-
View User Profile
-
View Posts
-
Send Message
Curse PremiumOn a somewhat related note, is there a way to remove the space between the bars? I'd prefer my Health and Power bars to be flush, but no matter what I try there is always 1 or 2 pixels in between.
Been using PitBull for what seems forever, best unit frames ever. :cool:
Did have a weird issue yesterday though I thought I'd mention ... a few days after the 3.0.2 patch I (naturally) downloaded PitBull and reconfigured all my unit frames to taste. Everything worked fine, as usual.
Yesterday I played my Priest for a couple hours, no issues; then I logged out, logged in to my Hunter, and *all* of my unit (player, target, party, focus, you name it) 'power' bars were gone ... instead of, say, a 50px health bar over a 50px mana/power/rage bar, there was just one huge 100px health bar, no power bar in sight.
I logged back to my Priest and a couple other characters, all had the same issue. Power bars were enabled under 'Modules', but on individual frame options, where they usually show up just below the Health bar options, there was nothing.
Luckily I back up all my AddOn settings once a week or so, I simply copied over my 'savedvariables/Pitbull.lua' from the archived version and everything was fine again. But it struck me odd how it came out of the blue like that, I wasn't fiddling around with anything, just logged to a different character and *poof*.