Is there a way to reduce the size of the font for time remaining on debuffs on targets? The font option does not seem to work no matter how much I move the slider. Is there also a way to set debuffs so that debuffs that are made by me (class specific) are sized larger than others while debuffs applied by teammates ?
I think I found a bug in the Power Spark module. I've searched the forums and didn't find anything related to this, so here goes, and forgive me if it's been asked before.
I was using an old version of Pitbull (don't remember exactly which). When Patch 2.4.2 came and I had troubles, I updated to r73914.3.zip . All was fine, except that the 5 second rule spark wasn't working properly.
For example, when spamming instant casts: the first one would trigger the spark; the second one wouldn't, and the spark would continue moving as if nothing happened; then the third would (correctly) reset it, and so on. It seemed to happen randomly (e.g. sometimes a string of 3 casts would work, then several wouldn't).
I found that overwriting the /Spark/Spark.lua file with the one from the old release fixed things for me (so far, at least... ).
I'm having a weird problem. My health bar visual stops synching with the actual percent. I am also having errors where I am targeting a person/critter and they just don't show up in my target area.
Here Is a screenshot of the visual bar not synching
I am really confused and would appreciate any help I could get with this,
Edit: I Think Cartographer may of been the culprit, but I would still like to know if there is a way to run cartographer with pitbull, and not have this issue
I'm having a weird problem. My health bar visual stops synching with the actual percent. I am also having errors where I am targeting a person/critter and they just don't show up in my target area.
Make sure both addons are fully updated (i run both without any hint of such problems).
In my grp the second listed person (leader) is fading in/out all the time (not range/combat fader conflict, only range is active) its only the background that fades from my set alpha to 0, the bars themselvs and the buff icons are uneffected.
I have my player frame set as a horizontal bar, and i want it to shrink inwards as i lose mana/hp, but it is trying to go up and down... i think when i set the frames to left and right it assumes i have them tall, but i just have them spread out. its kind of hard to explain, but is there any way to keep the orientation for the healbar and mana/hp loss when i switch it to left/right instead of top/bottom? i can post a screenshot if its too confusing >.>
Is there a way to make the debuffs that I cast on the target, such as Rupture and Garrote to be displayed bigger than all the other debuffs on the target?
I am kinda used to it coming from xperl, and use it all the time to watch when Rupture is ready for a refresh.
Thank you, and apologies if this has been asked before.
No. Top/bottom is for arranging the bars like this
|----Top----|
|---Bottom--|
Left/right is for arranging your bars like this.
|----||-----|
|Left||Right|
|----||-----|
so there is no way at all of changing it?
i'll try to use your images to say what i mean...
i have my bars like so
|------||----| <- these up here are where the overheal bars appear, and the bars now drain top down.
|Health||Mana|
I want it to be like this
|-----||Health||Mana||-----| <- the |--| is where i want the overheal bars to appear, and to drain inwards, in that direction. Is that possible? I know i've seen it in some screenshots, i just assumed that pitbull could do it, since it is the most versatile unitframe addon that i have seen (aside from discord, which is dead >.>).
I've had some strange behaviour two days ago. I was on my priest and I have only my buffs shown on the party/target frames. I'm tracking Renew duration with the buff button turning grey as the time passes. Although that day the buffs started flickering and from what I understand, basically the grey part of the button was vanishing momentary to reappear 0,5-1 second later.
Ever since 2.4.2 I've had an issue, like a few other posters, with my buffs\debuffs not showing up. At this point I've uninstalled and reinstalled pitbull. I've deleted my save variables. I removed all of my mods except for pitbull. No matter what I do, I get no buffs\debuff icons. The Aura module is apparently not loading. When I got the modules section, the check mark is missing from aura. Click on the box next to aura results in this error:
[2008/05/20 03:34:42-1260-x1]: PitBull-3.0r70306\PitBull.lua:1721: Bad argument #2 to `ToggleModuleActive'. "Aura" is not a known module.
At this point I'm confused. I do not use any custom dogtags, so I don't think this issue could have anything to do with that. I'm stumped.
I just updated Pitbull using the Wowace Updater to version 74494 from 2 hours ago. Since this update Pitbull does not work at all for me and I am presented the original Blizzard character frames. When I check the list of loaded addons i see Pitbull but I cannot find the setup menu anymore, anywhere.
Since the changelog say its changed to LibSharedMedia 3.0 from 2.0 i installed v3.0 manually but that did not help.
I just updated Pitbull using the Wowace Updater to version 74494 from 2 hours ago. Since this update Pitbull does not work at all for me and I am presented the original Blizzard character frames. When I check the list of loaded addons i see Pitbull but I cannot find the setup menu anymore, anywhere.
Since the changelog say its changed to LibSharedMedia 3.0 from 2.0 i installed v3.0 manually but that did not help.
I think it would have been helpfull if you included a stack trace - like Bugsack does.
[2008/05/20 10:17:05-220-x1]: PitBull-3.0r74494\PitBull.lua:690: Library "LibDogTag-3.0" not found.
LibRock-1.0-3317 (FuBar):1667: in function `Rock'
PitBull-3.0r74494\PitBull.lua:690: in main chunk
---
[2008/05/20 10:17:05-220-x1]: PitBull-3.0r74494\PitBull_MetaLayout.lua:580: Library "LibDogTag-3.0" not found.
LibRock-1.0-3317 (FuBar):1667: in function `Rock'
PitBull-3.0r74494\PitBull_MetaLayout.lua:580: in main chunk
---
[2008/05/20 10:17:05-220-x1]: PitBull-3.0r74494\Layouts\ABF.lua:10: attempt to call method 'RegisterLayout' (a nil value)
---
So it looks like the library libdogtag was upgraded and not included in the shipped zip files. Try to manually install the Libdogtag-3.0 library and see if pittbull works. And Libdogtag-unit-3.0
[2008/05/20 17:17:35-3-x1]: PitBull\PitBull.lua:7: Bad argument #3 to `NewAddon'. Library "LibRockDB-1.0" is not found.
LibRock-1.0-3317 (LibRock-1.0):1966: in function `NewAddon'
PitBull\PitBull.lua:7: in main chunk
I've manually installed LibRock-1.0 from the Updater and placed it in the Lig folder of Pitbull, same thing. =( Help, raids tonight.
removing the # from in front of embeds.xml in the Pitbull.toc file also worked for me. All of my settings are there, as well as all of my frames. Thanks!!
For those experiencing the same problem, just go to your AddOns folder, Pitbull, and there should be a file called Pitbull.loc It may not have the .loc suffix, but there's only one file named that anyway. DOuble click it, open it with Wordpad, and remove the # in front of the line where it saysembeds.xml
I was using an old version of Pitbull (don't remember exactly which). When Patch 2.4.2 came and I had troubles, I updated to r73914.3.zip . All was fine, except that the 5 second rule spark wasn't working properly.
For example, when spamming instant casts: the first one would trigger the spark; the second one wouldn't, and the spark would continue moving as if nothing happened; then the third would (correctly) reset it, and so on. It seemed to happen randomly (e.g. sometimes a string of 3 casts would work, then several wouldn't).
I found that overwriting the /Spark/Spark.lua file with the one from the old release fixed things for me (so far, at least... ).
Here Is a screenshot of the visual bar not synching
I am really confused and would appreciate any help I could get with this,
Edit: I Think Cartographer may of been the culprit, but I would still like to know if there is a way to run cartographer with pitbull, and not have this issue
Make sure both addons are fully updated (i run both without any hint of such problems).
In my grp the second listed person (leader) is fading in/out all the time (not range/combat fader conflict, only range is active) its only the background that fades from my set alpha to 0, the bars themselvs and the buff icons are uneffected.
The other ppl in the grp are also uneffected.
|----Top----|
|---Bottom--|
Left/right is for arranging your bars like this.
|----||-----|
|Left||Right|
|----||-----|
I am kinda used to it coming from xperl, and use it all the time to watch when Rupture is ready for a refresh.
Thank you, and apologies if this has been asked before.
so there is no way at all of changing it?
i'll try to use your images to say what i mean...
i have my bars like so
|------||----| <- these up here are where the overheal bars appear, and the bars now drain top down.
|Health||Mana|
I want it to be like this
|-----||Health||Mana||-----| <- the |--| is where i want the overheal bars to appear, and to drain inwards, in that direction. Is that possible? I know i've seen it in some screenshots, i just assumed that pitbull could do it, since it is the most versatile unitframe addon that i have seen (aside from discord, which is dead >.>).
[2008/05/20 03:34:42-1260-x1]: PitBull-3.0r70306\PitBull.lua:1721: Bad argument #2 to `ToggleModuleActive'. "Aura" is not a known module.
At this point I'm confused. I do not use any custom dogtags, so I don't think this issue could have anything to do with that. I'm stumped.
Since the changelog say its changed to LibSharedMedia 3.0 from 2.0 i installed v3.0 manually but that did not help.
Please help.
Exact same problem.
I think it would have been helpfull if you included a stack trace - like Bugsack does.
So it looks like the library libdogtag was upgraded and not included in the shipped zip files. Try to manually install the Libdogtag-3.0 library and see if pittbull works. And Libdogtag-unit-3.0
I've manually installed LibRock-1.0 from the Updater and placed it in the Lig folder of Pitbull, same thing. =( Help, raids tonight.
Dude
For those experiencing the same problem, just go to your AddOns folder, Pitbull, and there should be a file called Pitbull.loc It may not have the .loc suffix, but there's only one file named that anyway. DOuble click it, open it with Wordpad, and remove the # in front of the line where it saysembeds.xml
Fixed! Thanks ^^