Our records show that you have outstanding author rewards points. Please confirm your latest payment information and redeem your points balance via the Author Reward Store.
Thanks for the reply. The problem, I guess, is that I have another add on that is causing problems with BT as I currently have no text box. If I disable everything but BT the text box appears. I'll have to use a work around for now and will try to figure out what add on is causing the box to be hidden.
Thanks again for the reply
That issue sounds like something skinner might cause (its known to have every now and then)
@midgetmage55
No, this is not possible with Bartender4's visibility conditionals. You would have to write your own addon to run a check OnUpdate for mouseovers on your desired frames and use SetAlpha to show/hide them.
I was afraid that might be the case. I'll just have to come up with another idea. Thank you kindly for your speedy reply. ;D
Running the latest Bartender4 and i was messing around and disabled and enabled the totem bar in the Bartender Config and now i can't get it to show back up when i 'unlock' the bars i see where the totem suppose to be, but its not showing the default totem bar there and fade is not enabled or any of the other settings messed with.
I have read over a ton of pages of questions, and haven't found an answer. Please forgive if this is a repeat.
I run into a problem when I am morphed in two spots specifically:
against The Prophet Tharon'ja in Drak'Tharon Keep (not a big deal)
and when bitten by The Blood Queen in ICC
In both situations I do not get a Blizzard vehicle UI to use the new abilities. In Drak'Tharon I stand around and do little. In ICC I can't bite when I am a vampire and I cause raid wipes. No new Blizzard buttons appear there, but they appear everywhere else (like at the Colisseum, and Uld against Flame Leviathan). *Edit: the blizzard vehicle UI also works when manning cannons on the Gunship fight in ICC*
Is there a way to correct the settings so it will work with Bartender?
*Edit: I found some posts, and enabled Possess Bar for bar 1, and will see if it fixes the error*
Possess Bar for Bar1 should always be enabled, yes.
Becoming a vampire on Blood Queen isn't a vehicle. You're just being possessed. Thats why you don't get the UI, and without Possess Bar active on Bar 1, you don't get anything. It should really fix your issue. :)
Paging doesn't work anymore. I would use paging to put additional spells or whatnot, but now I can't seem to access it anymore. It's fine that you have switching disabled by default, but I would still like an option to turn it on, but can't seem to find one anywhere.
Tic "ActionBar Paging" in the State Configuration panel.
That's another thing. I lost any sort of tabs with this new update. I even completely removed the addon before updating it since Windows 7 usually does a merge copy instead of a replace copy.
Just complete the T-Chinese translation, and there is something I might misunderstand
WARNING: Pressing the button will reset your complete profile! If you're not sure about this create a new profile and use that to experiment.
Do you mean Pressing the button will reset your completed profile since I don't think reset a profile can be partially.
My translation goes like this
WARNING: Pressing the button will reset your completed profile! If you're not sure about this then please create a new profile and use that to experiment.
Maybe "Entire Profile" or "completely reset your profile" would be better choice of words?
my amendment is also goes near to the meaning of "Entire". Since it does have a slightly difference between Chinese and English description about the word complete.
forgive my poor English standard as I'm not an English native.
I'm new here and I've just installed an UI compil that uses Bartender4. I'm wandering to know if there's a way to color the XP bar while you are in rested condition, as happens with Dominos, and shows you how much rested you have leaving the color until you end your rested.
I was attempting to dismount my Argent Tournament mount (one of the ones that gives you a vehicle bar) and got these error messages:
Bartender4 blocked from using updateFunc()
Bartender4 blocked from using VehicleMenuBar:Hide()
Bartender4 blocked from using MainMenuBar:Show()
Bartender4 blocked from using PossessBarFrame:Hide()
Bartender4 blocked from using ShapeshiftBarFrame:Show()
Bartender4 blocked from using PossessButton1:Show()
Bartender4 blocked from using PossessButton2:Show()
Bartender4 blocked from using PlayerFrame:SetAttribute()
Bartender4 blocked from using PetFrame:SetAttribute()
I'm hoping there's just a few settings I can fix on this to make it so that when I exit a vehicle bar, I get my normal bars back, instead of having the Vehicle UI overlaid on top of my bars?
Edit: I'd had this problem with earlier UIs when exiting a vehicle (Cannons in ICC Gunship, Flame Leviathan vehicles in Ulduar, etc.), so I wasn't sure if it was a UI issue or not. I changed my UI, and Bartender was included in it, and at least tells me that something's happening to keep it from switching back.
Bartender does currently not modify the XP bar much. The default bar actually turns blue when you are rested, thats nothing an addon does.
Thanks a lot anyway.
Just another question, there's a guide where I can find the guidelines to how use the coding tags, or just a simple tag list with short description and some examples?
But I cant find any way to use circular bars in bartender 4. Is it me or did it never make it?
For all those others searching for circular action bars, also called "radial actionbars. Use macaroon, it works (as of 3.3.5) and allows arcing and circular actionbars, DOWNSIDE is that you have to configure it and its alot harder then bartender! (Yes you use it as an addition to bartender.)
That issue sounds like something skinner might cause (its known to have every now and then)
I was afraid that might be the case. I'll just have to come up with another idea. Thank you kindly for your speedy reply. ;D
Any Ideas?
-
View User Profile
-
View Posts
-
Send Message
Forum ModeratorMy long-term plans outlined in my previous post (here) are still valid and on the board, but still a bit away.
In the short to mid term, i cooked up this roadmap of issues/improvements to work on, and get a new version out the door.
This is basically a list of the tickets open on Bartender, condensed a bit and some stuff added that i wanted to do.
Does anyone have another genuine request that would make Bartender better?
Please tell me now, so i can plan for all those changes!
I plan to fix all this over the next two month or so, so a new release isnt that far out.
I run into a problem when I am morphed in two spots specifically:
against The Prophet Tharon'ja in Drak'Tharon Keep (not a big deal)
and when bitten by The Blood Queen in ICC
In both situations I do not get a Blizzard vehicle UI to use the new abilities. In Drak'Tharon I stand around and do little. In ICC I can't bite when I am a vampire and I cause raid wipes. No new Blizzard buttons appear there, but they appear everywhere else (like at the Colisseum, and Uld against Flame Leviathan). *Edit: the blizzard vehicle UI also works when manning cannons on the Gunship fight in ICC*
Is there a way to correct the settings so it will work with Bartender?
*Edit: I found some posts, and enabled Possess Bar for bar 1, and will see if it fixes the error*
-
View User Profile
-
View Posts
-
Send Message
Forum ModeratorBecoming a vampire on Blood Queen isn't a vehicle. You're just being possessed. Thats why you don't get the UI, and without Possess Bar active on Bar 1, you don't get anything. It should really fix your issue. :)
-
View User Profile
-
View Posts
-
Send Message
Forum ModeratorThat's another thing. I lost any sort of tabs with this new update. I even completely removed the addon before updating it since Windows 7 usually does a merge copy instead of a replace copy.
WARNING: Pressing the button will reset your complete profile! If you're not sure about this create a new profile and use that to experiment.
Do you mean Pressing the button will reset your completed profile since I don't think reset a profile can be partially.
My translation goes like this
WARNING: Pressing the button will reset your completed profile! If you're not sure about this then please create a new profile and use that to experiment.
-
View User Profile
-
View Posts
-
Send Message
Forum ModeratorBTW, the additional lines of the FAQ is also translated
Maybe "Entire Profile" or "completely reset your profile" would be better choice of words?
my amendment is also goes near to the meaning of "Entire". Since it does have a slightly difference between Chinese and English description about the word complete.
forgive my poor English standard as I'm not an English native.
I'm new here and I've just installed an UI compil that uses Bartender4. I'm wandering to know if there's a way to color the XP bar while you are in rested condition, as happens with Dominos, and shows you how much rested you have leaving the color until you end your rested.
Can't find nothing.
Can you help me pls? O.O
TVM
-
View User Profile
-
View Posts
-
Send Message
Forum ModeratorI was attempting to dismount my Argent Tournament mount (one of the ones that gives you a vehicle bar) and got these error messages:
Bartender4 blocked from using updateFunc()
Bartender4 blocked from using VehicleMenuBar:Hide()
Bartender4 blocked from using MainMenuBar:Show()
Bartender4 blocked from using PossessBarFrame:Hide()
Bartender4 blocked from using ShapeshiftBarFrame:Show()
Bartender4 blocked from using PossessButton1:Show()
Bartender4 blocked from using PossessButton2:Show()
Bartender4 blocked from using PlayerFrame:SetAttribute()
Bartender4 blocked from using PetFrame:SetAttribute()
I'm hoping there's just a few settings I can fix on this to make it so that when I exit a vehicle bar, I get my normal bars back, instead of having the Vehicle UI overlaid on top of my bars?
Edit: I'd had this problem with earlier UIs when exiting a vehicle (Cannons in ICC Gunship, Flame Leviathan vehicles in Ulduar, etc.), so I wasn't sure if it was a UI issue or not. I changed my UI, and Bartender was included in it, and at least tells me that something's happening to keep it from switching back.
Thanks a lot anyway.
Just another question, there's a guide where I can find the guidelines to how use the coding tags, or just a simple tag list with short description and some examples?
Tvm ;D
http://www.wowace.com/addons/bartender4/tickets/78-curved-circular-bar-option/
Its status is:
Fixed - Developer made requested changes. QA should verify.
But I cant find any way to use circular bars in bartender 4. Is it me or did it never make it?
For all those others searching for circular action bars, also called "radial actionbars. Use macaroon, it works (as of 3.3.5) and allows arcing and circular actionbars, DOWNSIDE is that you have to configure it and its alot harder then bartender! (Yes you use it as an addition to bartender.)
-
View User Profile
-
View Posts
-
Send Message
Forum Moderator