I have been having an issue with my bartender4 when I zone I lose the buttons on my micro menu bar the bar is there just with no buttons
I am having the exact same issue. Following the last patch, micro menu disappears whenever I pass thru a loading screen to a new zone. /reload fixes it but this is rather annoying.
I uninstalled all add ons, renamed the WTF folder and it still did it with only Bartender 4 loaded.
Is there any way to lock the pet bar as currently BT4 is set to locked and all is good but if say on the pet bar you click on an action and hold for a tiny bit and more to another pet bar action this one then becomes removed for the bar.
Again about "leave vehicle".
When i used Stormwind Love Boat with enabled "use Blizzard vehicle ui" and Vehicle bar no exit button nor vehicle bar appears. without using Blizzard vehicle ui, exit button appears with vehicle bar. But after checking and unchecking "use Blizzard vehicle ui" exit button disappears forever ( or until /reload).
I have had a problem that occurs only on all my shadow priests, when you do the 3 quests in Mt Hyjal when it switches bars to answer the Mental questions, then the one where you have the 10 answers to the crowd, and "the greater of two evils", the bars do not switch so you can interact. All my other pzillions toons work ok, only the Shadow priest does not, in either form. Have to log out, disable Bartender, relog to complete the quests. I have no clue as to where to go, maybe have to redo the bars for the Shadow priests?
Nothing needs to be "redone" for one spec of one class. Make sure one of your bars (typically bar 1) is toggled as the possession bar, with no freaky weird state configuration. My shadow priest did those quests with no troubles using the default BT configs.
Nothing needs to be "redone" for one spec of one class. Make sure one of your bars (typically bar 1) is toggled as the possession bar, with no freaky weird state configuration. My shadow priest did those quests with no troubles using the default BT configs.
Thanks, I will redo one of my SPriest to defaults. I did see that when I had Blizzard bars up, the were backwards, in Shadowform, my Holy spells were showing, and when in normal, my Shadowform spells were showing.
Sorry if this has been covered, I didn't see anyone mention it.
I seem to be having a problem with the pet bar.
On my hunter, my cat's (Shadowclaw, if that matters) prowl ability will not stick to the bar. If the pet dies or is dismissed, upon recalling the prowl ability is gone. It does not matter which slot it is assigned to.
On my warlock, my felhunter's 1st and 4th ability buttons will not hold abilities. Dropping an ability into these slots cause them to vanish down a hole. The middle 2 slots will hold anything I put in there. This does not happen with the other summoned demons.
I have tried resetting my profiles for those chars, but that didn't do the trick. Any help/advice is much appreciated.
I use the 10 action bars there: 3 with 10 buttons in the bottom middle (bars 1-3), 3 with 3 buttons at the bottom left (bars 4-6), 3 with 3 buttons at the bottom right (bars 7-9) and 1 with 12 buttons vertically on the right edge of the screen (bar 10).
As you can see, no issue with mage.
However, I run into an issue with my warrior. I did not know it, but apparently, what I see as bar 1, when I'm in defensive stance, is in fact bar 8. Therefore, button 1-2-3 on the top bar in the middle of my screen are the same as the 3 buttons I have in the bottom-right.
The only way I can see to solve this issue it to use only one bar set up as 3 x 3 for my bottom-left and bottom-right. So I tried that, but my problem is then that I can't separate the lines enough so that they line up with my middle bars without also separating the columns by the same distance.
Is there a way for me to say I want my lines separated by X pixels, but my columns by Y pixels? I'm happy to go much in the LUA code, I had to do it for other addons, so this one is not different, but I have no idea if it's possible and, even if it is, where to look.
Thank you for the quick reply and thanks for the all the great addons, I just noticed I use most of them!
It works great for my left and right bars at the bottom, which is the most important for me. However, since when I go change that line in lua code, it's a global change in the addon, the vertical bar I have on the right of the screen has now a bigger padding between the buttons. I tried to look in the SavedVariables folder, but the only option saved in there is "padding", which is hpad, not vpad.
So, is it possible for me to make the change you suggested for only specific bar or not? If not, no big deal, I'll just make that bar horizontal and that will solve this issue, but if there's a way, I'd be dumb not to ask :-)
I am having the exact same issue. Following the last patch, micro menu disappears whenever I pass thru a loading screen to a new zone. /reload fixes it but this is rather annoying.
I uninstalled all add ons, renamed the WTF folder and it still did it with only Bartender 4 loaded.
If anyone has a clue, please post a solution.
Date: 2011-02-11 00:36:50
ID: 1
Error occured in: AddOn: Bartender4
Count: 1
Message: Error: AddOn Bartender4 attempted to call a forbidden function (TargetUnit()) from a tainted execution path.
Debug:
[C]: TargetUnit()
..\FrameXML\ChatFrame.lua:1182: ?()
..\FrameXML\ChatFrame.lua:4196:
..\FrameXML\ChatFrame.lua:4162
[C]: ChatEdit_ParseText()
..\FrameXML\ChatFrame.lua:3825: ChatEdit_SendText()
..\FrameXML\ChatFrame.lua:3863: ChatEdit_OnEnterPressed()
[string "*:OnEnterPressed"]:1:
[string "*:OnEnterPressed"]:1
AddOns:
Swatter, v3.2.3 (<%codename%>)
WowheadLooter, v40012
NPCScan, v4.0.3.6
Atlas, v1.18.2
AtlasBattlegrounds, v1.18.2
AtlasDungeonLocs, v1.18.2
AtlasOutdoorRaids, v1.18.2
AtlasTransportation, v1.18.2
AtlasLoot, vv6.02.00
AtlasLootBurningCrusade, vv6.02.00
AtlasLootCataclysm, vv6.02.00
AtlasLootClassicWoW, vv6.02.00
AtlasLootCrafting, vv6.02.00
AtlasLootWorldEvents, vv6.02.00
AtlasLootWrathoftheLichKing, vv6.02.00
Babylonian, v5.1.DEV.130
Bartender4, v4.4.16
BaudBag, v4.0.2
Configator, v5.1.DEV.286
DBMBastionTwilight, v
DBMBurningCrusade, v
DBMCore, v
Enraged, v1.0
Factionizer, v40000.14
Gatherer, v3.2.3
GathererHUD, v3.2.3
GathererDBWowhead, v1.0.2010-12-19
GroupCalendar5, v5.4
Mapster, v1.4.0-8-gc87c6f3
MikScrollingBattleText, v5.5.91
MinimapButtonFrame, v3.1.4
MinimapButtonFrameSkinPack, v3.0
oGlow, v2.0
Omen, v3.1.0
OmniCC, v4.0.waffles11
Prat30, v3.4.15
Prat30HighCPUUsageModules, v
Prat30Libraries, v
Quartz, v3.0.5
RatingBuster, v
Recount, v
SexyMap, v
ShadowedUFOptions, v
ShadowedUnitFrames, vv3.3.3
TipTac, v10.12.05
TipTacItemRef, v10.12.06
TipTacTalents, v10.10.27
Titan, v5.0.2.40000 - Revision 519
TitanBag, v5.0.2.40000
TitanClock, v5.0.2.40000
TitanGold, v5.0.2.40000
TitanLocation, v5.0.2.40000
TitanLootType, v5.0.2.40000
TitanPerformance, v5.0.2.40000
TitanRepair, v5.0.2.40000
TitanVolume, v5.0.2.40000
TitanXP, v5.0.2.40000
ZoneLevelInfo, v1.4.6
BlizRuntimeLib_frFR v4.0.6.40000 <eu>
(ck=600)
+1 to whis,fix it pls
Sadly i could not reproduce the issue no matter what i tried, so i tried rearranging the code that moves/shows the buttons a bit.
SUCCESS!!! Whatever you did has fixed my problem with the Micro Menu - it no longer disappears.
Many thanks for a great addon and great response to our pleas!
When i used Stormwind Love Boat with enabled "use Blizzard vehicle ui" and Vehicle bar no exit button nor vehicle bar appears. without using Blizzard vehicle ui, exit button appears with vehicle bar. But after checking and unchecking "use Blizzard vehicle ui" exit button disappears forever ( or until /reload).
sorry for bad english)
Thanks, I will redo one of my SPriest to defaults. I did see that when I had Blizzard bars up, the were backwards, in Shadowform, my Holy spells were showing, and when in normal, my Shadowform spells were showing.
I seem to be having a problem with the pet bar.
On my hunter, my cat's (Shadowclaw, if that matters) prowl ability will not stick to the bar. If the pet dies or is dismissed, upon recalling the prowl ability is gone. It does not matter which slot it is assigned to.
On my warlock, my felhunter's 1st and 4th ability buttons will not hold abilities. Dropping an ability into these slots cause them to vanish down a hole. The middle 2 slots will hold anything I put in there. This does not happen with the other summoned demons.
I have tried resetting my profiles for those chars, but that didn't do the trick. Any help/advice is much appreciated.
-Dz
Here's what I want my UI to look like:
I use the 10 action bars there: 3 with 10 buttons in the bottom middle (bars 1-3), 3 with 3 buttons at the bottom left (bars 4-6), 3 with 3 buttons at the bottom right (bars 7-9) and 1 with 12 buttons vertically on the right edge of the screen (bar 10).
As you can see, no issue with mage.
However, I run into an issue with my warrior. I did not know it, but apparently, what I see as bar 1, when I'm in defensive stance, is in fact bar 8. Therefore, button 1-2-3 on the top bar in the middle of my screen are the same as the 3 buttons I have in the bottom-right.
The only way I can see to solve this issue it to use only one bar set up as 3 x 3 for my bottom-left and bottom-right. So I tried that, but my problem is then that I can't separate the lines enough so that they line up with my middle bars without also separating the columns by the same distance.
Is there a way for me to say I want my lines separated by X pixels, but my columns by Y pixels? I'm happy to go much in the LUA code, I had to do it for other addons, so this one is not different, but I have no idea if it's possible and, even if it is, where to look.
Thanks and sorry for the wall of text.
Around Line 196 are two variables, hpad and vpad. You can screw with those to influence horizontal and vertical padding.
I could probably allow configuration of this through the config UI, but don't hold your breath, i'm currently rather busy with non-WoW projects.
It works great for my left and right bars at the bottom, which is the most important for me. However, since when I go change that line in lua code, it's a global change in the addon, the vertical bar I have on the right of the screen has now a bigger padding between the buttons. I tried to look in the SavedVariables folder, but the only option saved in there is "padding", which is hpad, not vpad.
So, is it possible for me to make the change you suggested for only specific bar or not? If not, no big deal, I'll just make that bar horizontal and that will solve this issue, but if there's a way, I'd be dumb not to ask :-)
You get the idea, i hope. The id is the same as the bar number in the config.
Is there any way to use the Custom State Header to lock buttons during combat?
Something along the lines of:
Even better would be:
Or is there some other way to do this directly in the lua code?
Just gotta ask, why not just use the "lock" thats already built into BT?