Perhaps this is a basic question, but I'm having trouble switching action bars when I change to different forms. For example, when switching to Shadowform, it appears that the Shadowform action bar is something like Action Bar 7, however, Action Bar 1 remains on the screen in the spot I'd like the new bar to appear.
The same thing happens when shifting between cat and bear form. The default action bar remains in place and the customized ones for those forms do not appear.
How do I fix this?
You'll need to adjust Bar 1's paging, I believe. On my warrior. my 3 stances are set through Bar 1's paging. One stance is on Bar 1, and the other two are on Bars 2 and 3. I can then customize the buttons on the other bars to correspond to that stance.
You should see that in Bar 1's settings. On my warrior, it shows dropdown menus for each stance. I assume priests and druids would have similar dropdown menus.
You'll need to adjust Bar 1's paging, I believe. On my warrior. my 3 stances are set through Bar 1's paging. One stance is on Bar 1, and the other two are on Bars 2 and 3. I can then customize the buttons on the other bars to correspond to that stance.
You should see that in Bar 1's settings. On my warrior, it shows dropdown menus for each stance. I assume priests and druids would have similar dropdown menus.
Thanks. I just went through the options and noticed all this. However, I didn't actually change anything for Bar 1, yet it works now.
I haven't seen anyone mention this bug, so if it has been discussed already, I apologize.
I'm having an issue where the old Blizzard Bars will reappear. It seems to occur only when leaving a vehicle. I think (but am not sure) that it will occur most often when exiting a vehicle while still in combat. Unfortunately, I'm not yet able to reproduce the issue consistently, and therefore haven't been able to test it with just BT4 loaded, so it is entirely possible this is caused by a conflict with another addon.
Doing a /reload will resolve the issue, but it is becoming annoying to have to do a reload after jousting or after having a vehicle destroyed in Wintergrasp.
Has anyone else run into this issue, and what did they do to resolve it?
I am using Bartender4 4.4.13-1, and was testing out the UI that I would have for Cata on my main lvl80 toon. I enabled the XP bar and centered it toward the top of my screen. I locked all the bars and buttons, and saw the XP bar. When I moused over it, it vanished.
If I unlock my bars/buttons again, I see the green frame where the XP bar should be, but don't see an XP bar within the green frame. Disabling and re-enabling the XP bar doesn't fix it either.
Not sure if this is a BT4 problem, but in doing the new pre-cataclysm (phase 2) quest where I help out the courier and get the tablets. When I click the crystal I should get some "anti-elemental" abilities in my action bar, but nothing appears in my BT bars. Where should they appear?
"Use Blizzard Vehicle UI" is checked, and Vehicle Bar is set to "Enabled". I get in a seat at the table outside IF for the Pilgrim's Bounty event. I see the 6 buttons related to food on Bar 1 (1 "Pass..." button, and 5 "Feast on..." buttons). However, I don't see any "Leave vehicle" button. If I disable BT4 and use the default Blizz bars, I see the leave vehicle button just above the main action bar.
Is this a Blizzard bug or BT4 bug?
I also noticed that when I have BT4 enabled, and my Bar 1 is possessed by the Pilgrim's Bounty table, Buttons 1 through 6 are taken up by the feast icons. However, if I click the empty space where Buttons 7 - 0 would be, I hear a clicking sound. If I click where - and = would be, I don't hear a sound. I also don't hear a clicking sound if I click on any empty buttons on any other bar. (I was clicking random buttons on bar 1 to see if maybe one of them was the leave button.)
I'm working on getting the button back. It was some bad hack in the previous version, so i'm trying to do it properly now.
For the other issues:
Vehicle Bars (as well as all "Possession" bars) always seem to have 10 buttons, even if there are only 5 abilities. Thats why they produce clicking sounds, because Bartender cannot know which slot is actually empty, and just lets the game deal with it.
You'll need to adjust Bar 1's paging, I believe. On my warrior. my 3 stances are set through Bar 1's paging. One stance is on Bar 1, and the other two are on Bars 2 and 3. I can then customize the buttons on the other bars to correspond to that stance.
You should see that in Bar 1's settings. On my warrior, it shows dropdown menus for each stance. I assume priests and druids would have similar dropdown menus.
Thanks. I just went through the options and noticed all this. However, I didn't actually change anything for Bar 1, yet it works now.
In the options panel for BT4, you'll see a bar called "Blizzard bar" at the bottom of the list. Make sure it's disabled.
I'm having an issue where the old Blizzard Bars will reappear. It seems to occur only when leaving a vehicle. I think (but am not sure) that it will occur most often when exiting a vehicle while still in combat. Unfortunately, I'm not yet able to reproduce the issue consistently, and therefore haven't been able to test it with just BT4 loaded, so it is entirely possible this is caused by a conflict with another addon.
Doing a /reload will resolve the issue, but it is becoming annoying to have to do a reload after jousting or after having a vehicle destroyed in Wintergrasp.
Has anyone else run into this issue, and what did they do to resolve it?
... and I am indeed using MoveAnything. Thank you very much!
I'll stop using MoveAnything and see if the issue persists.
If I unlock my bars/buttons again, I see the green frame where the XP bar should be, but don't see an XP bar within the green frame. Disabling and re-enabling the XP bar doesn't fix it either.
Is it supposed to do that if you're max level?
Right now when I set keybinds in prot they apply to fury as well
Thanks
Nick
Make sure that you have the state and possessing options activated for Bar 1.
I enjoy the simplicity and there are just enough options to meet my needs.
Thank you very much for your efforts and time.
"Use Blizzard Vehicle UI" is checked, and Vehicle Bar is set to "Enabled". I get in a seat at the table outside IF for the Pilgrim's Bounty event. I see the 6 buttons related to food on Bar 1 (1 "Pass..." button, and 5 "Feast on..." buttons). However, I don't see any "Leave vehicle" button. If I disable BT4 and use the default Blizz bars, I see the leave vehicle button just above the main action bar.
Is this a Blizzard bug or BT4 bug?
I also noticed that when I have BT4 enabled, and my Bar 1 is possessed by the Pilgrim's Bounty table, Buttons 1 through 6 are taken up by the feast icons. However, if I click the empty space where Buttons 7 - 0 would be, I hear a clicking sound. If I click where - and = would be, I don't hear a sound. I also don't hear a clicking sound if I click on any empty buttons on any other bar. (I was clicking random buttons on bar 1 to see if maybe one of them was the leave button.)
For the other issues:
Vehicle Bars (as well as all "Possession" bars) always seem to have 10 buttons, even if there are only 5 abilities. Thats why they produce clicking sounds, because Bartender cannot know which slot is actually empty, and just lets the game deal with it.
Edit:
The button is back.
This was so much easier with LibActionButton now :)
Thank you :)