under Layout / Text / Time layout are the options:
10m
10 m
615
10:15
10.15
The last 2 are the options that seem like they should show tenths of seconds, but they do not show tenths of seconds in TimeLine mode.
It shows the time of my cyclones as 0.05 at 5 seconds, 0.04 at 4 seconds... so on, there are no tenths of seconds being displayed.
The tenths of seconds need displayed in order to be accurate. It seems like a bug to me that I'm hoping will be resolved and I was also hoping for some confirmation on this
under Layout / Text / Time layout are the options:
10m
10 m
615
10:15
10.15
The last 2 are the options that seem like they should show tenths of seconds, but they do not show tenths of seconds in TimeLine mode.
It shows the time of my cyclones as 0.05 at 5 seconds, 0.04 at 4 seconds... so on, there are no tenths of seconds being displayed.
The tenths of seconds need displayed in order to be accurate. It seems like a bug to me that I'm hoping will be resolved and I was also hoping for some confirmation on this
It was working at intended, the .xx is seconds. I added an option to display now also tenths of seconds.
Hi there,
the addon is really nice, but it does not show cooldowns for Holy Word Spells except for Holy Word: Chastise.
This will probably happen due to the fact that within a chacra-state, the Holy Word Spells do not trigger the Cooldown seen within the caster's spellbook
the spell ids:
88625 (chastise)
88684 (serenity)
88685 (sanctuary)
Posting ticket here as well in case someone smarter has more insight on the matter.
What is the enhancement in mind? How should it look and feel?
It is great that you have added some support for 1/10th seconds, but i feel it could be improved.
1. Make it available for the other time formats too.
2. Add an option to only show if less then 10s is left on timer. If there are many that need to have 1/10th precision above 10s, perhaps make that user defined but with 10s as default.
Please provide any additional information below.
I find it a bit surprising you added 1/10th to the hh.mm.ss timeformats, I have a hard time seeing the use of such precision on such long timers. Personally i mostly use the "615" format for the things where i would like 1/10 precision. As for the second improvement, personally i don't see any use of 1/10th precision above 10s. So a simple check box for only showing under 10s would meet my needs just fine. If someone really need to have it above 10s i guess a user defined cutoff could be an option.
- Possibility to have my own debuffs on the target displayed BIGGER than debuffs from other
people ("Only show my debuffs" is no option, I need to track the Critical Mass debuff from
other mages as well, but I also want that my Living Bomb/Pyroblast/etc. Debuffs are
displayed BIGGER - as in the feature used by Shadowed Unit Frames or XPearl). Currently
I am using Aura Frames and show my own debuffs "on the left", but adding the size option
would be better
- Sound on a Debuff (on a target for example) running out
- Is there any way to export a list for expert mode in Buff Filtering? Did not get this
to work
- A popup on a specific Debuff running out would be great - or is this already doable? I
noticed there was some sort of popup option, but did not fully understand how it works
My main is a mage, and I've actually setup Aura Frames to do pretty much exactly what you want with target debuffs. I use two containers. One is filtered to show my own debuffs and also anyone's Critical Mass or Shadow and Flame. The other is filtered to display the other debuffs. This gives ultimate display and layout flexibility (I use bars for the debuffs I really care about), and filtering is extremely cheap with this addon.
I use Weak Auras for the types of alerts you mention. That addon is excellent and very well suited for those sorts of tasks (and many more).
My main is a mage, and I've actually setup Aura Frames to do pretty much exactly what you want with target debuffs. I use two containers. One is filtered to show my own debuffs and also anyone's Critical Mass or Shadow and Flame. The other is filtered to display the other debuffs. This gives ultimate display and layout flexibility (I use bars for the debuffs I really care about), and filtering is extremely cheap with this addon.
I use Weak Auras for the types of alerts you mention. That addon is excellent and very well suited for those sorts of tasks (and many more).
The Alerts I currently also handle with a different Addon. Just would be nice to only have to use one addon for these kind of things.
The solution with two containers (which is what I currently do myselves as well) is IMHO a
not optimal solution. More place on the UI wasted, more places on screen to "look at for recent information". I think the solution with bigger personal debuffs as some Unit Frame Addons do it is clearly superior, I hope it will be implemented sometimes in the future.
Hello! Just wanted to say I'm loving Aura Frames as a replacement for Satrina Buff Frames. One quick question, I was curious if there is any way to move bars into rows (horizontally) instead of just columns (vertically)?
Again thanks so much for the replacement, it's done wonders for me!
Any chance at adding an option to specify number of buffs per row?
Or number of buffs per container?
*Edit* nvm, found it. Layout>Size and Scale> Horizontal Size/Vertical Size
Another question: Any way to filter by debuff type (4% physical dmg taken, 8% spell dmg taken, 30% cast slow, etc) without adding all possible spells to a list?
Has anyone having problems with last update of Masque? Because if I enable Masque, I cannot change the layout of time. I cannot change font, dimension, position etc etc.
Has anyone having problems with last update of Masque? Because if I enable Masque, I cannot change the layout of time. I cannot change font, dimension, position etc etc.
This.
If I log out and disable Masque, then it works fine.
The blizzard default frame "container" that holds a number of 'collapsed' buffs, does not always stay hidden and will often show back up and if you mouse over it, it expands and doesnt go away.
under Layout / Text / Time layout are the options:
10m
10 m
615
10:15
10.15
The last 2 are the options that seem like they should show tenths of seconds, but they do not show tenths of seconds in TimeLine mode.
It shows the time of my cyclones as 0.05 at 5 seconds, 0.04 at 4 seconds... so on, there are no tenths of seconds being displayed.
The tenths of seconds need displayed in order to be accurate. It seems like a bug to me that I'm hoping will be resolved and I was also hoping for some confirmation on this
What do you mean? Got a screenshot or can you give a more detailed description?
It was working at intended, the .xx is seconds. I added an option to display now also tenths of seconds.
http://forums.curseforge.com/showpost.php?p=316493&postcount=59
Added support for this in the last alpha.
What is the enhancement in mind? How should it look and feel?
It is great that you have added some support for 1/10th seconds, but i feel it could be improved.
1. Make it available for the other time formats too.
2. Add an option to only show if less then 10s is left on timer. If there are many that need to have 1/10th precision above 10s, perhaps make that user defined but with 10s as default.
Please provide any additional information below.
I find it a bit surprising you added 1/10th to the hh.mm.ss timeformats, I have a hard time seeing the use of such precision on such long timers. Personally i mostly use the "615" format for the things where i would like 1/10 precision. As for the second improvement, personally i don't see any use of 1/10th precision above 10s. So a simple check box for only showing under 10s would meet my needs just fine. If someone really need to have it above 10s i guess a user defined cutoff could be an option.
Things I am missing, though:
- Possibility to have my own debuffs on the target displayed BIGGER than debuffs from other
people ("Only show my debuffs" is no option, I need to track the Critical Mass debuff from
other mages as well, but I also want that my Living Bomb/Pyroblast/etc. Debuffs are
displayed BIGGER - as in the feature used by Shadowed Unit Frames or XPearl). Currently
I am using Aura Frames and show my own debuffs "on the left", but adding the size option
would be better
- Sound on a Debuff (on a target for example) running out
- Is there any way to export a list for expert mode in Buff Filtering? Did not get this
to work
- A popup on a specific Debuff running out would be great - or is this already doable? I
noticed there was some sort of popup option, but did not fully understand how it works
Thanks for the great work!
I use Weak Auras for the types of alerts you mention. That addon is excellent and very well suited for those sorts of tasks (and many more).
The Alerts I currently also handle with a different Addon. Just would be nice to only have to use one addon for these kind of things.
The solution with two containers (which is what I currently do myselves as well) is IMHO a
not optimal solution. More place on the UI wasted, more places on screen to "look at for recent information". I think the solution with bigger personal debuffs as some Unit Frame Addons do it is clearly superior, I hope it will be implemented sometimes in the future.
Again thanks so much for the replacement, it's done wonders for me!
-
View User Profile
-
View Posts
-
Send Message
Curse PremiumOr number of buffs per container?
*Edit* nvm, found it. Layout>Size and Scale> Horizontal Size/Vertical Size
Another question: Any way to filter by debuff type (4% physical dmg taken, 8% spell dmg taken, 30% cast slow, etc) without adding all possible spells to a list?
This.
If I log out and disable Masque, then it works fine.
Yeah me too, but I cannot use Masque layouts (as Caith, Dream etc.)
I'm using Caith and it's perfect for me, but Aura Frames is not updated yet :(
-
View User Profile
-
View Posts
-
Send Message
Curse PremiumFixed!
when moving bars or icons, it cannot snap to window border. i think it should snap automatically.
-
View User Profile
-
View Posts
-
Send Message
Curse Premium