IS this MOD being updated at all anymore? Anyone have an update or is the author MIA? Id like to make some changes to the addon but not if it is being actively worked...???
IS this MOD being updated at all anymore? Anyone have an update or is the author MIA? Id like to make some changes to the addon but not if it is being actively worked...???
Is there going to be support for all seals? Currently, I cannot select Seal of the Martyr (Alliance version of Blood). I don't have a horde paladin, so it's possible they can't select Seal of Corruption (Horde version of Vengeance). It would be nice for when I go ret spec to not have to worry about casting the seal.
Also, with seal changes, it would be nice if the cap was raised higher than 60 seconds on auto rebuff. Ideally, I'd like to set both seal and righteous fury to 10 min so they are always refreshed long enough for a boss fight. (I do the same with blessings as well.)
Still my favorite buffing mod. On a side note - the mage portal thing is awesome, and I actually like using it on all my characters. I never even knew about it until I logged on my mage and saw it. No more using an action bar slot for hearth/engineering teleporters!
I was trying out this mod for the self buff reminder but I can't seem to get it working right. I am assuming by the settings I could see that I can have it reminder me say 30 seconds before a buff wears off and route that reminder to different spots.
I have tried it with my warrior as a shout reminder (bs/cs) and it doesn't seem to work. No errors are being generated, just nothing is actually working. Anyone else having this problem or know how to fix it? I have the time setup right, the buff in question ticked etc.
r57/"ZOMGBuffs-Maintenance_Release__for_3.0.9", USEng client/server, standalone updated libs, WoW 3.0.9 live. Frequently in 5-mans & raids, receive "Attempt to access a recycled table" errors after clicking the ZOMG buff button. This has happened on both a Priest & a Mage. Other than knowing it happens when clicking the ZOMG buff button, cannot provide any further details. Errors received so far:
ZOMGBuffs--16612\\ZOMGBuffs.lua:91: Attempt to access a recycled table
Above error has occurred alone on a few different occasions. One session it repeated three times, another it repeated 149 times and so on. All within parties or raids attempting to rebuff using the ZOMGBuffs button.
Next:
ZOMGBuffs--16612\\ZOMGBuffs.lua:91: Attempt to access a recycled table\nZOMGBuffs--16612\\ZOMGBuffs.lua:91: in function <Interface\\AddOns\\ZOMGBuffs\\ZOMGBuffs.lua:91>\nZOMGBuffs--16612\\ZOMGBuffs.lua:3399: in function <Interface\\AddOns\\ZOMGBuffs\\ZOMGBuffs.lua:3364>\n<in C code>: in function `Show'\nInterface\\FrameXML\\RestrictedFrames.lua:377: in function `Show':\n<string>:\" local list = self:GetFrameRef(\"list\")...\":3: in function <[string \" local list = self:GetFrameRef(\"list\")...\"]:1>\n(tail call): ?:\n<in C code>: ?\nInterface\\FrameXML\\RestrictedExecution.lua:884: in function <Interface\\FrameXML\\RestrictedExecution.lua:855>:\n(tail call): ?:\nInterface\\FrameXML\\SecureHandlers.lua:137: in function `SecureHandler_OnSimpleEvent':\n<string>:\"*:OnEnter\":3: in function <[string \"*:OnEnter\"]:1>\n<in C code>: ?
ZOMGBuffs--16612\\ZOMGBuffs.lua:91: Attempt to access a recycled table\nZOMGBuffs--16612\\ZOMGBuffs.lua:91: in function <Interface\\AddOns\\ZOMGBuffs\\ZOMGBuffs.lua:91>\nZOMGBuffs--16612\\ZOMGBuffs.lua:3399: in function <Interface\\AddOns\\ZOMGBuffs\\ZOMGBuffs.lua:3364>\n<in C code>: in function `Show'\nInterface\\FrameXML\\SecureTemplates.lua:646: in function <Interface\\FrameXML\\SecureTemplates.lua:558>:\nInterface\\FrameXML\\SecureTemplates.lua:853: in function `SecureGroupHeader_Update':\n<string>:\"*:OnShow\":1: in function <[string \"*:OnShow\"]:1>\n<in C code>: ?\n<in C code>: in function `Show'\nInterface\\FrameXML\\RestrictedFrames.lua:377: in function `Show':\n<string>:\" local list = self:GetFrameRef(\"list\")...\":3: in function <[string \" local list = self:GetFrameRef(\"list\")...\"]:1>\n(tail call): ?:\n<in C code>: ?\nInterface\\FrameXML\\RestrictedExecution.lua:884: in function <Interface\\FrameXML\\RestrictedExecution.lua:855>:\n(tail call): ?:\nInterface\\FrameXML\\SecureHandlers.lua:137: in", -- [1]
" function `SecureHandler_OnSimpleEvent':\n<string>:\"*:OnEnter\":3: in function <[string \"*:OnEnter\"]:1>\n<in C code>: ?
ZOMGBuffs--16612\\ZOMGBuffs.lua:91: Attempt to access a recycled table\nZOMGBuffs--16612\\ZOMGBuffs.lua:91: in function <Interface\\AddOns\\ZOMGBuffs\\ZOMGBuffs.lua:91>\nZOMGBuffs--16612\\ZOMGBuffs.lua:3399: in function `DrawCell'\nZOMGBuffs--16612\\ZOMGBuffs.lua:3212: in function <Interface\\AddOns\\ZOMGBuffs\\ZOMGBuffs.lua:3193>\n<in C code>: in function `SetAttribute'\nInterface\\FrameXML\\SecureTemplates.lua:645: in function <Interface\\FrameXML\\SecureTemplates.lua:558>:\nInterface\\FrameXML\\SecureTemplates.lua:853: in function `SecureGroupHeader_Update':\n<string>:\"*:OnShow\":1: in function <[string \"*:OnShow\"]:1>\n<in C code>: ?\n<in C code>: in function `Show'\nInterface\\FrameXML\\RestrictedFrames.lua:377: in function `Show':\n<string>:\" local list = self:GetFrameRef(\"list\")...\":3: in function <[string \" local list = self:GetFrameRef(\"list\")...\"]:1>\n(tail call): ?:\n<in C code>: ?\nInterface\\FrameXML\\RestrictedExecution.lua:884: in function <Interface\\FrameXML\\RestrictedExecution.lua", -- [1]
":855>:\n(tail call): ?:\nInterface\\FrameXML\\SecureHandlers.lua:137: in function `SecureHandler_OnSimpleEvent':\n<string>:\"*:OnEnter\":3: in function <[string \"*:OnEnter\"]:1>\n<in C code>: ?
ZOMGBuffs--16612\\ZOMGBuffs.lua:91: Attempt to access a recycled table\nZOMGBuffs--16612\\ZOMGBuffs.lua:91: in function <Interface\\AddOns\\ZOMGBuffs\\ZOMGBuffs.lua:91>\nZOMGBuffs--16612\\ZOMGBuffs.lua:3399: in function <Interface\\AddOns\\ZOMGBuffs\\ZOMGBuffs.lua:3364>\n<in C code>: in function `Show'\nInterface\\FrameXML\\SecureTemplates.lua:646: in function <Interface\\FrameXML\\SecureTemplates.lua:558>:\nInterface\\FrameXML\\SecureTemplates.lua:853: in function `SecureGroupHeader_Update':\nInterface\\FrameXML\\SecureTemplates.lua:448: in function `SecureGroupHeader_OnAttributeChanged':\n<string>:\"*:OnAttributeChanged\":1: in function <[string \"*:OnAttributeChanged\"]:1>\n<in C code>: in function `SetAttribute'\nInterface\\FrameXML\\RestrictedFrames.lua:379: in function `Show':\n<string>:\" local list = self:GetFrameRef(\"list\")...\":3: in function <[string \" local list = self:GetFrameRef(\"list\")...\"]:1>\n(tail call): ?:\n<in C code>: ?\nInterface\\FrameXML\\RestrictedExecution.lua:884: in functio", -- [1]
"n <Interface\\FrameXML\\RestrictedExecution.lua:855>:\n(tail call): ?:\nInterface\\FrameXML\\SecureHandlers.lua:137: in function `SecureHandler_OnSimpleEvent':\n<string>:\"*:OnEnter\":3: in function <[string \"*:OnEnter\"]:1>\n<in C code>: ?
ZOMGBuffs--16612\\ZOMGBuffs.lua:91: Attempt to access a recycled table
The above giant pile of errors occurred in a raid 5 days ago. The first four errors all occurred at exactly the same time (22:36:00 as recorded in BugSack/BugGrabber). Errors #1, #2 & #4 each repeated five times, #3 repeated three times. The last error--same one as the first listed that has occurred several times on its own--happened 1/100 of a second after the first four: 22:36:01. It repeated once.
r55 and prior of ZOMGBuffs did not have any such "Attempt to access a recycled table" errors.
Is this mod still being supported, or is there another place to post support questions for it?
ZOMGBuffs claims to be PallyPower compatible, but when I joined a raid yesterday, my raid leader (running the latest PallyPower 3.0.22) said he could not see me in his list of Paladins and therefore could not make blessing assignments for me. As soon as I unloaded ZOMGBuffs and then loaded PallyPower, then he was able to see me again.
I was *not* running both mods at the same time...just one or the other. If I try to run them at the same time, the raid leader can see my PallyPower, but none of the PP assignments he makes for me shows up in my ZOMGBuffs configuration.
This makes ZOMGBuffs completely unusable. How hard is it to look at the PallyPower code and make it compatible? I am not going to ask my raid leader to switch...I want to use ZOMGBuffs but it needs to work like PallyPower from my raid leader's point of view.
And if you can't support this and need to run both mods at the same time (which I'm willing to do), then you need to add a button to the config window to "Load buff assignment from PallyPower" or something like that.
Almost got kicked from the guild raid group for this, so I'm not happy about it.
ZOMGBuffs r58, USEng client/server, WoW 3.1 live, all modules active. Error within 10 minutes of logging on a Mage:
["message"] = {
"ZOMGBuffs_BuffTehRaid-$Revision: 58 $\\ZOMGBuffs_BuffTehRaid.lua:2494: attempt to index field 'icon' (a nil value)\nAceAddon-2.0-91096 (Ace2):552: in function <Interface\\AddOns\\Ace2\\AceAddon-2.0\\AceAddon-2.0.lua:545>\nAceAddon-2.0-91096 (Ace2):674: in function `InitializeAddon'\nAceAddon-2.0-91096 (Ace2):541: in function <Interface\\AddOns\\Ace2\\AceAddon-2.0\\AceAddon-2.0.lua:518>\n<in C code>: ?\nAceEvent-2.0-91091 (Ace2):298: in function `TriggerEvent'\nAceEvent-2.0-91091 (Ace2):910: in function <Interface\\AddOns\\Ace2\\AceEvent-2.0\\AceEvent-2.0.lua:903>\n<in C code>: in function `LoadAddOn'\nZOMGBuffs-58\\ZOMGBuffs.lua:5702: in function `OnEnableOnce'\nZOMGBuffs-58\\ZOMGBuffs.lua:5864: in function <Interface\\AddOns\\ZOMGBuffs\\ZOMGBuffs.lua:5851>\n<in C code>: in function `pcall'\nAceAddon-2.0-91096 (Ace2):24: in function <Interface\\AddOns\\Ace2\\AceAddon-2.0\\AceAddon-2.0.lua:23>\nAceAddon-2.0-91096 (Ace2):1055: in function `ManualEnable'\nAceAddon-2.0-91096 (Ace2):983: in function <Inte", -- [1]
"rface\\AddOns\\Ace2\\AceAddon-2.0\\AceAddon-2.0.lua:976>\n<in C code>: ?\nAceEvent-2.0-91091 (Ace2):260: in function `TriggerEvent'\nAceEvent-2.0-91091 (Ace2):910: in function <Interface\\AddOns\\Ace2\\AceEvent-2.0\\AceEvent-2.0.lua:903>\n\n ---", -- [2]
},
["type"] = "error",
["time"] = "2009/04/15 15:35:41",
["session"] = 913,
["counter"] = 1
No raid was joined, was just standing around talking in guild chat. An earlier 15-minute logon of a Priest did not produce an error.
r55 and prior of ZOMGBuffs did not have any such "Attempt to access a recycled table" errors.
Yeh, they wouldn't. I put in the validation code on the tables, so now they give this error rather than failing silently and blowing up later. There's a table being discarded somewhere and I'm later using it, and this is to help me find that.
However, your errors here are the first usable ones I've seen. All mine so far have had no stack traceback, so have been useless to me. So thanks :)
ZOMGBuffs appears in ninja panel as "waiting". Can you please take a look at what is causing ZOMGBuffs to display "waiting", it works perfectly but still causes minor ocd when it's not displaying as it should.
When I try to send a whisper to anyone ZOMG Buffs does not allow me to see any of my whispers and I get an error. Also, if anyone tryes to send me a whisper, that person gets an error too, and I can't see the whisper. With "I can't see the whisper" I mean that when I hit enter after sending a whisper to anyone, the whisper will not appear in the chat. Any fix for this pls? If needed (I do believe more ppl have this) I will post the error that I get when I get home.
I've seen this whisper issue reported with DBM installed from people in my guild. I run ZOMGBuffs and don't have any whisper issues like this (I also use BigWigs instead of DBM). Turning off DBM fixed it for them. Not sure if it's the same with you, but thought I'd mention it.
Currently ZOMG buffs doesn't seem to be detecting buffs properly. It wants to continuously buff people with whatever the selected buff is. Ie it wants to buff the same mage with kings indefinitely even though no one else has kings or even after everyone has kings. This is just since the patch.
No whisper issues here either (I also use BigWigs as opposed to DBM). But in addition to the error I posted above with WoW 3.1, more with further usage (also posted to Curse comments as I was unable to log in here earlier this morning).
r58 of ZOMGBuffs again. Some time after the first error (above post), I quickly logged off of WoW while in a 5-man party on the Mage where the previous error appeared. Then I logged back on and automatically rejoined the party (without having to be reinvited).
When that happened, two (new) errors were thrown up immediately:
["message"] = "ZOMGBuffs-58\\ZOMGBuffs.lua:1853: attempt to perform arithmetic on upvalue 'lastInspectTime' (a nil value)\nAceAddon-2.0-91096 (Ace2):552: in function <Interface\\AddOns\\Ace2\\AceAddon-2.0\\AceAddon-2.0.lua:545>\nAceAddon-2.0-91096 (Ace2):674: in function `InitializeAddon'\nAceAddon-2.0-91096 (Ace2):541: in function <Interface\\AddOns\\Ace2\\AceAddon-2.0\\AceAddon-2.0.lua:518>\n<in C code>: ?\nAceEvent-2.0-91091 (Ace2):298: in function `TriggerEvent'\nAceEvent-2.0-91091 (Ace2):910: in function <Interface\\AddOns\\Ace2\\AceEvent-2.0\\AceEvent-2.0.lua:903>\n<in C code>: in function `LoadAddOn'\nZOMGBuffs-58\\ZOMGBuffs.lua:4910: in function <Interface\\AddOns\\ZOMGBuffs\\ZOMGBuffs.lua:4900> \n<in C code>: ?\nAceEvent-2.0-91091 (Ace2):298: in function `TriggerEvent'\nAceEvent-2.0-91091 (Ace2):910: in function <Interface\\AddOns\\Ace2\\AceEvent-2.0\\AceEvent-2.0.lua:903>\n\n ---",
["type"] = "error",
["time"] = "2009/04/15 20:00:32",
["session"] = 920,
["counter"] = 1
["message"] = "ZOMGBuffs-58\\ZOMGBuffs.lua:1853: attempt to perform arithmetic on upvalue 'lastInspectTime' (a nil value)\n\n ---",
["type"] = "error",
["time"] = "2009/04/15 20:00:32",
["session"] = 920,
["counter"] = 1
10 minutes later, still in the party, but the party lead inviting a new member to it (and not in combat):
["message"] = "ZOMGBuffs--16612\\ZOMGBuffs.lua:1853: attempt to perform arithmetic on upvalue 'lastInspectTime' (a nil value)\n<in C code>: ?\nInterface\\FrameXML\\SecureHandlers.lua:42: in function <Interface\\FrameXML\\SecureHandlers.lua:41>:\nInt erface\\FrameXML\\SecureHandlers.lua:321: in function <Interface\\FrameXML\\SecureHandlers.lua:316>:\n: ?\nInterface\\FrameXML\\SecureHandlers.lua:375: in function <Interface\\FrameXML\\SecureHandlers.lua:359>:\n(t ail call): ?:\n\n ---",
["type"] = "error",
["time"] = "2009/04/15 20:09:46",
["session"] = 920,
["counter"] = 1
Hopefully the bugs can be fixed.
Rollback Post to RevisionRollBack
To post a comment, please login or register a new account.
[2009/03/08 12:27:41-1536-x1]: ZOMGBuffs-50\ZOMGBuffs.lua:1758: attempt to perform arithmetic on upvalue 'lastInspectTime' (a nil value)
http://www.wowace.com/projects/zomgbuffs/files/ Latest alpha is dated 3/10/2009, so I'd say yes, it's still being worked on.
Also, with seal changes, it would be nice if the cap was raised higher than 60 seconds on auto rebuff. Ideally, I'd like to set both seal and righteous fury to 10 min so they are always refreshed long enough for a boss fight. (I do the same with blessings as well.)
Still my favorite buffing mod. On a side note - the mage portal thing is awesome, and I actually like using it on all my characters. I never even knew about it until I logged on my mage and saw it. No more using an action bar slot for hearth/engineering teleporters!
I have tried it with my warrior as a shout reminder (bs/cs) and it doesn't seem to work. No errors are being generated, just nothing is actually working. Anyone else having this problem or know how to fix it? I have the time setup right, the buff in question ticked etc.
Thanks for your help in this.
And i got the following error message today:
Above error has occurred alone on a few different occasions. One session it repeated three times, another it repeated 149 times and so on. All within parties or raids attempting to rebuff using the ZOMGBuffs button.
Next:
The above giant pile of errors occurred in a raid 5 days ago. The first four errors all occurred at exactly the same time (22:36:00 as recorded in BugSack/BugGrabber). Errors #1, #2 & #4 each repeated five times, #3 repeated three times. The last error--same one as the first listed that has occurred several times on its own--happened 1/100 of a second after the first four: 22:36:01. It repeated once.
r55 and prior of ZOMGBuffs did not have any such "Attempt to access a recycled table" errors.
ZOMGBuffs claims to be PallyPower compatible, but when I joined a raid yesterday, my raid leader (running the latest PallyPower 3.0.22) said he could not see me in his list of Paladins and therefore could not make blessing assignments for me. As soon as I unloaded ZOMGBuffs and then loaded PallyPower, then he was able to see me again.
I was *not* running both mods at the same time...just one or the other. If I try to run them at the same time, the raid leader can see my PallyPower, but none of the PP assignments he makes for me shows up in my ZOMGBuffs configuration.
This makes ZOMGBuffs completely unusable. How hard is it to look at the PallyPower code and make it compatible? I am not going to ask my raid leader to switch...I want to use ZOMGBuffs but it needs to work like PallyPower from my raid leader's point of view.
And if you can't support this and need to run both mods at the same time (which I'm willing to do), then you need to add a button to the config window to "Load buff assignment from PallyPower" or something like that.
Almost got kicked from the guild raid group for this, so I'm not happy about it.
I dont think this is a good behaviour of the leader..
Anyway it would be nice if you had look at it zeksie
["message"] = {
"ZOMGBuffs_BuffTehRaid-$Revision: 58 $\\ZOMGBuffs_BuffTehRaid.lua:2494: attempt to index field 'icon' (a nil value)\nAceAddon-2.0-91096 (Ace2):552: in function <Interface\\AddOns\\Ace2\\AceAddon-2.0\\AceAddon-2.0.lua:545>\nAceAddon-2.0-91096 (Ace2):674: in function `InitializeAddon'\nAceAddon-2.0-91096 (Ace2):541: in function <Interface\\AddOns\\Ace2\\AceAddon-2.0\\AceAddon-2.0.lua:518>\n<in C code>: ?\nAceEvent-2.0-91091 (Ace2):298: in function `TriggerEvent'\nAceEvent-2.0-91091 (Ace2):910: in function <Interface\\AddOns\\Ace2\\AceEvent-2.0\\AceEvent-2.0.lua:903>\n<in C code>: in function `LoadAddOn'\nZOMGBuffs-58\\ZOMGBuffs.lua:5702: in function `OnEnableOnce'\nZOMGBuffs-58\\ZOMGBuffs.lua:5864: in function <Interface\\AddOns\\ZOMGBuffs\\ZOMGBuffs.lua:5851>\n<in C code>: in function `pcall'\nAceAddon-2.0-91096 (Ace2):24: in function <Interface\\AddOns\\Ace2\\AceAddon-2.0\\AceAddon-2.0.lua:23>\nAceAddon-2.0-91096 (Ace2):1055: in function `ManualEnable'\nAceAddon-2.0-91096 (Ace2):983: in function <Inte", -- [1]
"rface\\AddOns\\Ace2\\AceAddon-2.0\\AceAddon-2.0.lua:976>\n<in C code>: ?\nAceEvent-2.0-91091 (Ace2):260: in function `TriggerEvent'\nAceEvent-2.0-91091 (Ace2):910: in function <Interface\\AddOns\\Ace2\\AceEvent-2.0\\AceEvent-2.0.lua:903>\n\n ---", -- [2]
},
["type"] = "error",
["time"] = "2009/04/15 15:35:41",
["session"] = 913,
["counter"] = 1
No raid was joined, was just standing around talking in guild chat. An earlier 15-minute logon of a Priest did not produce an error.
Yeh. Like I'm not happy about people making demands like this, which is why I gave up visiting these forums. I don't get paid for this.
However, your errors here are the first usable ones I've seen. All mine so far have had no stack traceback, so have been useless to me. So thanks :)
r58 of ZOMGBuffs again. Some time after the first error (above post), I quickly logged off of WoW while in a 5-man party on the Mage where the previous error appeared. Then I logged back on and automatically rejoined the party (without having to be reinvited).
When that happened, two (new) errors were thrown up immediately:
["message"] = "ZOMGBuffs-58\\ZOMGBuffs.lua:1853: attempt to perform arithmetic on upvalue 'lastInspectTime' (a nil value)\nAceAddon-2.0-91096 (Ace2):552: in function <Interface\\AddOns\\Ace2\\AceAddon-2.0\\AceAddon-2.0.lua:545>\nAceAddon-2.0-91096 (Ace2):674: in function `InitializeAddon'\nAceAddon-2.0-91096 (Ace2):541: in function <Interface\\AddOns\\Ace2\\AceAddon-2.0\\AceAddon-2.0.lua:518>\n<in C code>: ?\nAceEvent-2.0-91091 (Ace2):298: in function `TriggerEvent'\nAceEvent-2.0-91091 (Ace2):910: in function <Interface\\AddOns\\Ace2\\AceEvent-2.0\\AceEvent-2.0.lua:903>\n<in C code>: in function `LoadAddOn'\nZOMGBuffs-58\\ZOMGBuffs.lua:4910: in function <Interface\\AddOns\\ZOMGBuffs\\ZOMGBuffs.lua:4900> \n<in C code>: ?\nAceEvent-2.0-91091 (Ace2):298: in function `TriggerEvent'\nAceEvent-2.0-91091 (Ace2):910: in function <Interface\\AddOns\\Ace2\\AceEvent-2.0\\AceEvent-2.0.lua:903>\n\n ---",
["type"] = "error",
["time"] = "2009/04/15 20:00:32",
["session"] = 920,
["counter"] = 1
["message"] = "ZOMGBuffs-58\\ZOMGBuffs.lua:1853: attempt to perform arithmetic on upvalue 'lastInspectTime' (a nil value)\n\n ---",
["type"] = "error",
["time"] = "2009/04/15 20:00:32",
["session"] = 920,
["counter"] = 1
10 minutes later, still in the party, but the party lead inviting a new member to it (and not in combat):
["message"] = "ZOMGBuffs--16612\\ZOMGBuffs.lua:1853: attempt to perform arithmetic on upvalue 'lastInspectTime' (a nil value)\n<in C code>: ?\nInterface\\FrameXML\\SecureHandlers.lua:42: in function <Interface\\FrameXML\\SecureHandlers.lua:41>:\nInt erface\\FrameXML\\SecureHandlers.lua:321: in function <Interface\\FrameXML\\SecureHandlers.lua:316>:\n: ?\nInterface\\FrameXML\\SecureHandlers.lua:375: in function <Interface\\FrameXML\\SecureHandlers.lua:359>:\n(t ail call): ?:\n\n ---",
["type"] = "error",
["time"] = "2009/04/15 20:09:46",
["session"] = 920,
["counter"] = 1
Hopefully the bugs can be fixed.