I don't know if this has been already mentioned. Warrior and Sunder Armor with Devastate, if have SA on a mob an refresh it using Devastate the timer of SA will be reset to 30 seconds but the bar does not reset to its full length/width - only when you hit Devastate quite often.
It is not a big problem, just very confusing in difficult fights, when you have no time reading the small timer numbers and relay on the bar itself.
I apologize if I'm missing something obvious, but I've just loaded this addon, and using all defaults, (other than disabling some specific skills), all of my bars stack on top of each other. Also, using a focus macro for Sap, if I'm targetting the mob, I get "focus" and "target" printed on top of each other on the sap bar.
Any help is appreciated, and thank you for all your effort.
Just so I get this straight. With the "sticky" bar set, I can put Banish, Seduce, etc all there so they show up in that bar set? I assume this removes the need for any /focus macros to track these CC effects?
If that's the case, you have sold me. :)
A couple other questions:
- what's the "all-in-one" option for bars?
- when tracking target debuffs on my warlock, it says "Corruption - (target)". Why doesn't it say the target's name instead? I'll prob just take out that part anyway.
-- Also, just got this error (along with a couple other Cartographer errors) -
ClassTimer-1.0 r40180\ClassTimer.lua:68: attempt to concatenate field 'name' (a nil value)
-- Tested the sticky feature... It tracked my first fear on a target. When fear expired, I was targeting another target. I went back to the once feared mob and re-feared it. Sticky did not track that fear. Why is that? I noticed it's a bit finicky - same thing happened after I re-seduced a focused mob - sticky didn't track it.
Okay so I want ClassTimer to behave like this:
Show all buffs/debuffs I cast on any target all the time under the same anchor.
I figured I need to use the sticky option. So I stickied all buffs there.
Then I disabled all other groups (e.g. player, focus, target, General).
And then nothing shows up anymore :\
What am I doing wrong?
On another note..
What is "Improved Shadow Word: Pain"?
And "Shadow Weaving" is actually called "Shadow Vulnerability"; I had to add it myself to make it show up.
Also, please add "Prayer of Mending" as a default for priests :D
EDIT Just got this error, after mysteriously a bar for Renew showed up...
[2007/06/17 21:32:39-1286-x1]: ClassTimer-1.0 r40272\ClassTimer.lua:325: bad argument #3 to 'gsub' (string/function/table expected)
1st off, TY for the work you've put into such a great mod so far. <3 it.
Here is the error for the sticky problem myself and others are having..
ClassTimer.lua:68: attempt to concatenate field 'name' (a nil value)
torano posted it, but just so you know it's sticky related, it happens when the bar runs out. I myself have been having this problems with stickies since r38111.
Hopefully it's an easy fix.. not seeing my sap and blind times are killing me.
[2007/06/18 01:52:07-1116-x1]: AceLocale-2.2-39907 (Ace2):479: Babble-Spell-2.2: Translation "Frenzy Effect" does not exist.
ClassTimer-1.0 r40272\ClassTimer.lua:198: in function <Interface\AddOns\ClassTimer\ClassTimer.lua:187>
<in C code>: in function `pcall'
AceAddon-2.0-40431 (Ace2):24: in function <Interface\AddOns\Ace2\AceAddon-2.0\AceAddon-2.0.lua:23>
AceAddon-2.0-40431 (Ace2):577: in function `InitializeAddon'
AceAddon-2.0-40431 (Ace2):455: in function <Interface\AddOns\Ace2\AceAddon-2.0\AceAddon-2.0.lua:432>
<in C code>: ?
AceEvent-2.0-38824 (Ace2):320: in function `TriggerEvent'
AceEvent-2.0-38824 (Ace2):1019: in function <Interface\AddOns\Ace2\AceEvent-2.0\AceEvent-2.0.lua:1012>
I just have a question, updating from ClassTimer-r39615 to ClassTimer-r40272, the trinket option under timmers no longer available, is this a bug or intended not to track trinkets anymore?
I just have a question, updating from ClassTimer-r39615 to ClassTimer-r40272, the trinket option under timmers no longer available, is this a bug or intended not to track trinkets anymore?
Quote from Ominous »
ill do one better than adding them, ill make it possible to add your own buffs :)
I think it's intentionally. You can define your own trinket buffs now via "Extra".
I tried this yesterday and it works just fine. Just activate your trinket and add the name of the buff to "Extra". It doesn't seem to matter if its a self buff or an aura. It works with both.
Buffs of trinkets really change a lot. Class talents don't. So this was probably the best solution.
Find weakness is not tracked with the german version,
maybe an error with babble?
I remember it was the same with roguetimerfu,
worked a patch, stopped with the next and so on :D
Find weakness is not tracked with the german version,
maybe an error with babble?
I remember it was the same with roguetimerfu,
worked a patch, stopped with the next and so on :D
sry for the language, I`m german.
Oh you damn german! Sorry just kidding. :-) What you can do because you are a german is to check if Find Weakness is translated right. If it's not post the correct translation so someone can update it. :-)
The german word for "weakness" is "Schw?che" (hope this comes out right - EDIT: No, it doesn't).
I don't know how babble encodes umlauts but it seems it has two letters there. That's definitely too much. :-)
If you can show me the encoding table used in babble I can tell you which escape sequence you will need. It doesn't seem to be ASCII.
Otherwise just look for an "a" with two dots on it. It's nr. 132 in the extended ASCII table.
sry for beeing german :P,
hum cant log in at the moment,
but I think the new buff gained by find weakness is called
"Schw(first umlaut)che aufsp(second one)ren" the keycodes are Alt+0228 (arial selected) for the first
and i just can`t find the second now :(.
ps: Just got the second ALT+0252,
but still do not get how babble wants it written.
Rollback Post to RevisionRollBack
To post a comment, please login or register a new account.
It is not a big problem, just very confusing in difficult fights, when you have no time reading the small timer numbers and relay on the bar itself.
But thanks for the fast responds.
Any help is appreciated, and thank you for all your effort.
If that's the case, you have sold me. :)
A couple other questions:
- what's the "all-in-one" option for bars?
- when tracking target debuffs on my warlock, it says "Corruption - (target)". Why doesn't it say the target's name instead? I'll prob just take out that part anyway.
-- Also, just got this error (along with a couple other Cartographer errors) -
ClassTimer-1.0 r40180\ClassTimer.lua:68: attempt to concatenate field 'name' (a nil value)
-- Tested the sticky feature... It tracked my first fear on a target. When fear expired, I was targeting another target. I went back to the once feared mob and re-feared it. Sticky did not track that fear. Why is that? I noticed it's a bit finicky - same thing happened after I re-seduced a focused mob - sticky didn't track it.
2) All in one is were you can make say target and focus appear in one group
3) and ok about error
Show all buffs/debuffs I cast on any target all the time under the same anchor.
I figured I need to use the sticky option. So I stickied all buffs there.
Then I disabled all other groups (e.g. player, focus, target, General).
And then nothing shows up anymore :\
What am I doing wrong?
On another note..
What is "Improved Shadow Word: Pain"?
And "Shadow Weaving" is actually called "Shadow Vulnerability"; I had to add it myself to make it show up.
Also, please add "Prayer of Mending" as a default for priests :D
EDIT Just got this error, after mysteriously a bar for Renew showed up...
Works great, thanks!
Tovi
Here is the error for the sticky problem myself and others are having..
torano posted it, but just so you know it's sticky related, it happens when the bar runs out. I myself have been having this problems with stickies since r38111.
Hopefully it's an easy fix.. not seeing my sap and blind times are killing me.
Thanks for the great mod.
I just have a question, updating from ClassTimer-r39615 to ClassTimer-r40272, the trinket option under timmers no longer available, is this a bug or intended not to track trinkets anymore?
I think it's intentionally. You can define your own trinket buffs now via "Extra".
I tried this yesterday and it works just fine. Just activate your trinket and add the name of the buff to "Extra". It doesn't seem to matter if its a self buff or an aura. It works with both.
Buffs of trinkets really change a lot. Class talents don't. So this was probably the best solution.
Tovi
Hunter talent throws an error on game entry.
maybe an error with babble?
I remember it was the same with roguetimerfu,
worked a patch, stopped with the next and so on :D
sry for the language, I`m german.
Oh you damn german! Sorry just kidding. :-) What you can do because you are a german is to check if Find Weakness is translated right. If it's not post the correct translation so someone can update it. :-)
From Babble-Spell.lua
I don't know how babble encodes umlauts but it seems it has two letters there. That's definitely too much. :-)
If you can show me the encoding table used in babble I can tell you which escape sequence you will need. It doesn't seem to be ASCII.
Otherwise just look for an "a" with two dots on it. It's nr. 132 in the extended ASCII table.
Tovi
hum cant log in at the moment,
but I think the new buff gained by find weakness is called
"Schw(first umlaut)che aufsp(second one)ren" the keycodes are Alt+0228 (arial selected) for the first
and i just can`t find the second now :(.
ps: Just got the second ALT+0252,
but still do not get how babble wants it written.