Are you planning in implementing the clearfont support again? In previous versions i could easily change the font with prat. But with the current version i see no way to change the font (changing the font in the clearfont options doesnt change anything and i find no /prat command for it).
EDIT: By reading the other comments again i notice that other users have a FuBar Icon for Prat... Since Prat2 i deleted the Prat_Fubar2 folder as it isnt supported any longer (look here: http://wowace.com/wiki/Prat_FuBar2 )
Prat has a fubar plugin written into its code. If you don't see it, right-click on your fubar, go to chat, and check off Prat. To change fonts, use the font size module and check "remember font".
I run pretty much the same mods for all my characters, I do have some that are class specific. But the errors I'm getting are from mods that I run on all my toons. Work fine for all the others except this one..here are the 2 error messages.
[2007/05/28 17:30:18-193-x1]: AceOO-2.0-25921 (Ace2):633: FuBarPlugin-2.0: FuBarPlugin-2.0 requires Dewdrop-2.0.
Ace2\AceLibrary\AceLibrary.lua:100: in function `error'
FuBarPlugin-2.0-34599 (Prat_libs):885: in function `OnInstanceInit'
AceOO-2.0-25921 (Ace2):633: in function `init'
AceAddon-2.0-36325 (Ace2):721: in function `init'
AceOO-2.0-25921 (Ace2):469: in function <Interface\AddOns\Ace2\AceOO-2.0\AceOO-2.0.lua:442>
(tail call): ?:
Prat\extras\PratFu.lua:147: in main chunk
---
2007/05/28 17:30:18-193-x1]: Prat\extras\PratWaterfall.lua:35: Cannot find a library instance of Dewdrop-2.0.
Ace2\AceLibrary\AceLibrary.lua:470: in function `AceLibrary'
Prat\extras\PratWaterfall.lua:35: in main chunk
Please allow the shaman class color to be pulled from babble. Babble, and most other mods, pull thier class color infomormation from the global RAID_CLASS_COLORS array as defined by blizzard. If a user wants to change a class color, they can easily edit this array before any addons load by preceding it with a few bangs (!), I made my own one-liner addon to keep shamans teal after the 2.1 patch.
When I use Prat, I see the shaman color as the same purple as the Warlock. Is this a bug or will this be fixed to make it the same color as the dark blue used in game?
It's actually not the same color but it is similar enough not to matter. It was changed to make it easier to read (I guess) but due to everyone's difficulty in telling the two apart, it's been noted that it will be changed back at some point.
When I use Prat, I see the shaman color as the same purple as the Warlock. Is this a bug or will this be fixed to make it the same color as the dark blue used in game?
Yes, sometime is similar to warlock's one, sometime it's the new Blizzard default. I can't figure why... May anyone help us?
Thanks!
Please allow the shaman class color to be pulled from babble. Babble, and most other mods, pull thier class color infomormation from the global RAID_CLASS_COLORS array as defined by blizzard. If a user wants to change a class color, they can easily edit this array before any addons load by preceding it with a few bangs (!), I made my own one-liner addon to keep shamans teal after the 2.1 patch.
I'm having some problems with the latest verison of Prat. To start with it all loaded fine, FU_Bar plugin all worked, then all of a sudden the plugin was gone and the only way to configure Prat was via the / commands. I have tried deleting, re-installed, flushing the WTF files etc etc but I cannot for the life of me get the FUBar plugin back. Is there an easy way to achieve this or is there some other method via a GUI interface to configure the addon? I have seen a screenshot that leads me to think there is but I'm not sure: http://uifiles.worldofwar.net/upload/pics/WoWScrnShot_050607_043606_20070510.jpg
Any way to launch the prat FUBar plugin / icon or a GUI interface via the slash commands?
NB. I should also add that Prat doesn't appear as a choice to enable from the main FUBar plugins menu either, it is acting just like it isn't loaded at all but it is and the functionality of what it does works fine.
My Fubar plugin for Prat is also gone.
I use DeuceCommander to bring up the waterfall config.
no clue how to get the fubar plugin back, as there are no errors on login/zoning :<
Bugsack says no errors
/dump PratFu
shows that the plugin was initialized, but Fubar doesn't add it in the dewdrop menu
hmmm.. same problem as the posters above. FuBar_plugin was there, but is gone and cant be reassigned to the FuBar. (there is no "chat" menu in the FuBar menu any more...)
I encountered a few problems when entering combat when this mod was enabled. After disabling this mod they all worked as they should do. I always use the wow ace updater so I always have the latest versions.
ag_uf and pitbull
If i didn't target something before I entered combat my target and target of target would not be displayed.
bongos2 (only noticed this on my warrior)
when I changed stances the bar with my abilities appeared to lock preventing those abilities for that particular stance being displayed. However leaving cobat everything worked fine.
Bartender 3 did not have this problem.
I don't know if this is a problem with this mod or how the others are written etc. for the short period I used this mod I thought it was fantastic.
Are you planning in implementing the clearfont support again? In previous versions i could easily change the font with prat. But with the current version i see no way to change the font (changing the font in the clearfont options doesnt change anything and i find no /prat command for it).
EDIT: By reading the other comments again i notice that other users have a FuBar Icon for Prat... Since Prat2 i deleted the Prat_Fubar2 folder as it isnt supported any longer (look here: http://wowace.com/wiki/Prat_FuBar2 )
I'm not planning on any further changes. Hopefully the support you need can be found in the options I have already provided
I encountered a few problems when entering combat when this mod was enabled. After disabling this mod they all worked as they should do. I always use the wow ace updater so I always have the latest versions.
ag_uf and pitbull
If i didn't target something before I entered combat my target and target of target would not be displayed.
bongos2 (only noticed this on my warrior)
when I changed stances the bar with my abilities appeared to lock preventing those abilities for that particular stance being displayed. However leaving cobat everything worked fine.
Bartender 3 did not have this problem.
I don't know if this is a problem with this mod or how the others are written etc. for the short period I used this mod I thought it was fantastic.
Please allow the shaman class color to be pulled from babble. Babble, and most other mods, pull thier class color infomormation from the global RAID_CLASS_COLORS array as defined by blizzard. If a user wants to change a class color, they can easily edit this array before any addons load by preceding it with a few bangs (!), I made my own one-liner addon to keep shamans teal after the 2.1 patch.
Oh, thanks for this! Now hoping Prat takes your advice so I can have the old teal back in chat channels too. :)
There were details on how to replace Prat's color 2 pages back. However I have removed it from the SVN build now. You will have dark blue back as your shaman color derived from the blizzard color tables.
Recently I have been finding less and less satisfaction with coding WoW addons, and WoW in general - burnout myabe.
I have vacation plans, and perhaps may return afterwards, but either way, thank you all for your support over these many months! I hope you have enjoyed my work as much as I have enjoyed doing it.
Take Care,
-Syl
Rollback Post to RevisionRollBack
To post a comment, please login or register a new account.
EDIT: By reading the other comments again i notice that other users have a FuBar Icon for Prat... Since Prat2 i deleted the Prat_Fubar2 folder as it isnt supported any longer (look here: http://wowace.com/wiki/Prat_FuBar2 )
[2007/05/28 17:30:18-193-x1]: AceOO-2.0-25921 (Ace2):633: FuBarPlugin-2.0: FuBarPlugin-2.0 requires Dewdrop-2.0.
Ace2\AceLibrary\AceLibrary.lua:100: in function `error'
FuBarPlugin-2.0-34599 (Prat_libs):885: in function `OnInstanceInit'
AceOO-2.0-25921 (Ace2):633: in function `init'
AceAddon-2.0-36325 (Ace2):721: in function `init'
AceOO-2.0-25921 (Ace2):469: in function <Interface\AddOns\Ace2\AceOO-2.0\AceOO-2.0.lua:442>
(tail call): ?:
Prat\extras\PratFu.lua:147: in main chunk
---
2007/05/28 17:30:18-193-x1]: Prat\extras\PratWaterfall.lua:35: Cannot find a library instance of Dewdrop-2.0.
Ace2\AceLibrary\AceLibrary.lua:470: in function `AceLibrary'
Prat\extras\PratWaterfall.lua:35: in main chunk
---
http://www.wowinterface.com/downloads/fileinfo.php?id=7189
The addon I made.
Yes, sometime is similar to warlock's one, sometime it's the new Blizzard default. I can't figure why... May anyone help us?
Thanks!
And :)
Oh, thanks for this! Now hoping Prat takes your advice so I can have the old teal back in chat channels too. :)
Any way to launch the prat FUBar plugin / icon or a GUI interface via the slash commands?
NB. I should also add that Prat doesn't appear as a choice to enable from the main FUBar plugins menu either, it is acting just like it isn't loaded at all but it is and the functionality of what it does works fine.
I use DeuceCommander to bring up the waterfall config.
no clue how to get the fubar plugin back, as there are no errors on login/zoning :<
Bugsack says no errors
/dump PratFu
shows that the plugin was initialized, but Fubar doesn't add it in the dewdrop menu
any ideas?
ag_uf and pitbull
If i didn't target something before I entered combat my target and target of target would not be displayed.
bongos2 (only noticed this on my warrior)
when I changed stances the bar with my abilities appeared to lock preventing those abilities for that particular stance being displayed. However leaving cobat everything worked fine.
Bartender 3 did not have this problem.
I don't know if this is a problem with this mod or how the others are written etc. for the short period I used this mod I thought it was fantastic.
Blizzard default UI.
I'm not planning on any further changes. Hopefully the support you need can be found in the options I have already provided
This is not a prat bug.
There were details on how to replace Prat's color 2 pages back. However I have removed it from the SVN build now. You will have dark blue back as your shaman color derived from the blizzard color tables.
Note the link, and use the workaround there
I have vacation plans, and perhaps may return afterwards, but either way, thank you all for your support over these many months! I hope you have enjoyed my work as much as I have enjoyed doing it.
Take Care,
-Syl