I have a matter with bartender and update doing nothing whith it :'(
on non default bar, when i open for exemple (menu or my book) all the time i have some blocks how disapear. must log off.
can you help me ? thx a lot ^^
It just so happens that I think I know what you are talking about. As I don't have a fix for it I think I will elaborate for some people that might know how to fix this.
My friend warrior is having a problem where a certain 3 buttons will constantly disappear from his bar. I really can't recall what two of the buttons were but I do remember that one was Bloodrage. It didn't matter where he moved this button on his bar it would always dissapear after using the ability or after opening his spellbook.
If anyone has any information on this I am sure my friend and this other poster would greatly appreciate it :)
I checked in a fix for the BT3 & AutoBar problem. There was an unused StateDriver in the xml. Its removal allows BT3 to do bar switching during combat again.
Could you please explain how to manually change this? I play a Rogue and this is very, very detrimental to my gameplay (and I really hate playing without Bartender, too). Any further explanation on how to alleviate the problem would be very, very much appreciated.
Uh... update?
I have the latest version that I am aware of [r36518.1001] and I am still have that problem as well. Bars switch just fine out of combat, but during combat is a no go.
I have a matter with bartender and update doing nothing whith it :'(
on non default bar, when i open for exemple (menu or my book) all the time i have some blocks how disapear. must log off.
can you help me ? thx a lot ^^
It just so happens that I think I know what you are talking about. As I don't have a fix for it I think I will elaborate for some people that might know how to fix this.
My friend warrior is having a problem where a certain 3 buttons will constantly disappear from his bar. I really can't recall what two of the buttons were but I do remember that one was Bloodrage. It didn't matter where he moved this button on his bar it would always dissapear after using the ability or after opening his spellbook.
If anyone has any information on this I am sure my friend and this other poster would greatly appreciate it :)
Turn off the "re-use blizzard buttons" option and reload UI. It causes disappearing buttons on Warriors, Rogues and probably Druids.
I misunderstood the initial question, i though pressing two modifiers at once was causing that issue.
I've commited a temp fix for the modifier switching, and i think it should work again.
Odd graphics issue with the stance bar on my 12 Druid.
I only have bear form at this level... and the Icon is correct size horizontally... but it is stretched out vertically like 3 - 4 x as big as it suppose to be.
xxxxx
x x
x x
x x
x x
x x
x x
xxxxx
sorta like that (I'm at work so cant give a screen shot).
All other bars look fine and working dandy. If I bring up the options for the stance bar, and adjust pretty much any setting, and the button goes to correct size.
Logout and back in or reloadui and bam back to the elongated button.
The fade/mouseover option for bars is not working as of 2.1. If you mouseover the bar you still get the tooltip, but there is no icon.
I am also having this problem. What's interesting about it is that if you unlock the bars (and they turn green) then it *does* work properly - mouseover the bar and it appears, mouse away and it's gone. However, once you lock the bars you get the behavior that Killariel described - mousing over gets you the tooltips but the bar doesn't appear. Any help would be greatly appreciated!
The fade/mouseover option for bars is not working as of 2.1. If you mouseover the bar you still get the tooltip, but there is no icon.
I am also having this problem. What's interesting about it is that if you unlock the bars (and they turn green) then it *does* work properly - mouseover the bar and it appears, mouse away and it's gone. However, once you lock the bars you get the behavior that Killariel described - mousing over gets you the tooltips but the bar doesn't appear. Any help would be greatly appreciated!
P.S. I am not using AutoBar.
I do not have this problem and I am using AutoBar. I currently use two bars in a faded state and both fade in properly on mouseover with bars locked. r36518.1001
Odd graphics issue with the stance bar on my 12 Druid.
I only have bear form at this level... and the Icon is correct size horizontally... but it is stretched out vertically like 3 - 4 x as big as it suppose to be.
kind of like this: ?
my stealth stance is stretched out along the whole left side of the screen. i have my stances at the top of the screen and it looks like it is being pulled down to the default height.
I'm having a silly problem. When I open up keybindings, I don't see the options to bind the bartender buttons on one of my accounts. On my other account, I have the option of binding like "Bartender 3 Bar 1 Button 1" etc, but that is not showing up at all. I browsed the last 4 pages, and didn't see anyone mentioning this.
I checked in a fix for the BT3 & AutoBar problem. There was an unused StateDriver in the xml. Its removal allows BT3 to do bar switching during combat again.
Could you please explain how to manually change this? I play a Rogue and this is very, very detrimental to my gameplay (and I really hate playing without Bartender, too). Any further explanation on how to alleviate the problem would be very, very much appreciated.
Uh... update?
I have the latest version that I am aware of [r36518.1001] and I am still have that problem as well. Bars switch just fine out of combat, but during combat is a no go.
confirmed. during combat bars do not update.
Is this an existing problem that AutoBar is causing or is it a bug within Bartender3 itself?
Odd graphics issue with the stance bar on my 12 Druid.
I only have bear form at this level... and the Icon is correct size horizontally... but it is stretched out vertically like 3 - 4 x as big as it suppose to be.
kind of like this: ?
my stealth stance is stretched out along the whole left side of the screen. i have my stances at the top of the screen and it looks like it is being pulled down to the default height.
I am having the same issue. My stealth stance button is above the 3 main Bartender 3 action bars that I use. It is stretching down accross all 3 of the bars. It does not hugely affect my play, but it is unsightly. Any fixes to this issue yet?
As others have posted... please, please, make an option to disable the reagent counts for abilities that use reagents. Or at least, disable the count for anything that uses a soul shard. For warlocks, it's redundant to have this number for every spell that uses a shard...
Create Healthstone
Create Soulstone
Create Spellstone
Create Firestone
Summon Voidwalker
Summon Succubus
Summon Felhunter
Enslave Demon
Soul Fire
Shadowburn
Soulshatter
Ritual of Souls
Ritual of Summoning
before all sorry for my poor english.
I have a matter with bartender and update doing nothing whith it :'(
on non default bar, when i open for exemple (menu or my book) all the time i have some blocks how disapear. must log off.
can you help me ? thx a lot ^^
It just so happens that I think I know what you are talking about. As I don't have a fix for it I think I will elaborate for some people that might know how to fix this.
My friend warrior is having a problem where a certain 3 buttons will constantly disappear from his bar. I really can't recall what two of the buttons were but I do remember that one was Bloodrage. It didn't matter where he moved this button on his bar it would always dissapear after using the ability or after opening his spellbook.
If anyone has any information on this I am sure my friend and this other poster would greatly appreciate it :)
confirmed. during combat bars do not update.
I was just about to post this =)
Aye - can we have an option to toggle off the count display ?
I have commented out ( in Bartender3_ButtonClass.lua) :
Line 164
-- frame.count = _G[("%sCount"):format(name)]
Lines 294-300
--function Bartender3.Class.Button.prototype:UpdateCount()
-- if ( IsConsumableAction(self.action) ) then
-- self.frame.count:SetText(GetActionCount(self.action))
-- else
-- self.frame.count:SetText("")
-- end
--end
Line 228
-- self:UpdateCount()
In retrospect, I decided I would like to see some IsConsumableAction values (like potions etc)
So, I have changed line 295 in Bartender3_ButtonClass.lua :
if ( IsConsumableAction(self.action) and not self.parent.config.HideMacrotext) then
So, if I want to hide the reagent counts, I set that bar's macro text to off. That seems a workable compromise to me.
will only let me bind on bar 1...how do i bind stuff to bar 2?
ps. nothing at the bottom of the key binding menu about bar 2-10
Turn off the "re-use blizzard buttons" option and reload UI. It causes disappearing buttons on Warriors, Rogues and probably Druids.
All is well once again, thank you.
I only have bear form at this level... and the Icon is correct size horizontally... but it is stretched out vertically like 3 - 4 x as big as it suppose to be.
xxxxx
x x
x x
x x
x x
x x
x x
xxxxx
sorta like that (I'm at work so cant give a screen shot).
All other bars look fine and working dandy. If I bring up the options for the stance bar, and adjust pretty much any setting, and the button goes to correct size.
Logout and back in or reloadui and bam back to the elongated button.
I am also having this problem. What's interesting about it is that if you unlock the bars (and they turn green) then it *does* work properly - mouseover the bar and it appears, mouse away and it's gone. However, once you lock the bars you get the behavior that Killariel described - mousing over gets you the tooltips but the bar doesn't appear. Any help would be greatly appreciated!
P.S. I am not using AutoBar.
I do not have this problem and I am using AutoBar. I currently use two bars in a faded state and both fade in properly on mouseover with bars locked. r36518.1001
kind of like this:
my stealth stance is stretched out along the whole left side of the screen. i have my stances at the top of the screen and it looks like it is being pulled down to the default height.
Is this an existing problem that AutoBar is causing or is it a bug within Bartender3 itself?
It returns to normal as long soon as I modify any setting affecting stance bar though.
Seems other people are haveing the same issue, useing r36518
I am having the same issue. My stealth stance button is above the 3 main Bartender 3 action bars that I use. It is stretching down accross all 3 of the bars. It does not hugely affect my play, but it is unsightly. Any fixes to this issue yet?
Create Healthstone
Create Soulstone
Create Spellstone
Create Firestone
Summon Voidwalker
Summon Succubus
Summon Felhunter
Enslave Demon
Soul Fire
Shadowburn
Soulshatter
Ritual of Souls
Ritual of Summoning
AutoBar causes the issue. Bartender3 works fine without AutoBar.