can you add an option to bartender that allows locking of buttons when using shift+drag or ability to modify the button to drag abilitys. some of my stances are keybound to shift+other keys, and can be annoying when i click something on my bar, it will move and get removed. bongos has this feature but i want to use bartender for it. if this option is already in bartender can u plz point it out to me because i can not find it. thanks for your time =p
The shapeshift bar for druids is the Stance bar. It is also used for paladin auras and warrior stances. Set that to hide via the menu (or click on it when bars are unlocked to turn it red from green) and it will hide.
Not hide the bar ^^
hide the tooltip.
A option to hide tooltip hide all tooltip but not hide tooltip stance bar.
does anyone have a response to my question, i want to use bartender but i would seriously like this function in it before i switch over, it is really annoying when it happens in pvp. thanks again =D
Lately I've been experiencing problems with the shapeshift bar.
Sometimes when I'm kicked out of stealth the shapeshift bar gets stuck in stealth mode.
It happened 3 times during yesterday's Karazhan run and it's quite annoying.
A 'ReloadUI()' do not solve the issue. I have to quit WoW and restart it.
It would be nice if BT3 had a command to force a 'reset' (or fix the bug, if it is a bug).
Any id?as of what could cause this and possible a solution for it?
I have enabled button paging for one bar and setup catform, stealth and bearform as well as modifier 'shift' for it. Now when I hold down shift while in a shapeshift, the "shift-bar" shows up properly*, but if I leave the shapeshift while still holding down the shift-key, bartender3 will display the default bar that should only be visible when not shapeshifted or not holding down shift, instead of the "shift-bar".
(*) would also be cool if we could disable modifiers in stances btw
Bartender3 buttons are not changing when i use CyCircled since the last update, not sure if it's a config option but i have looked everywhere to no avail. Im using r31687 Cycircled, and r31808 Bartender3.
Bartender3 buttons are not changing when i use CyCircled since the last update, not sure if it's a config option but i have looked everywhere to no avail. Im using r31687 Cycircled, and r31808 Bartender3.
I'm using the same two versions as you do but the skin changes for me.
My stealthbar problem has been there for several versions though. It's just more frequent now than before and I don't think cyCircled has anything to do with that.
can you add an option to bartender that allows locking of buttons when using shift+drag or ability to modify the button to drag abilitys. some of my stances are keybound to shift+other keys, and can be annoying when i click something on my bar, it will move and get removed. bongos has this feature but i want to use bartender for it. if this option is already in bartender can u plz point it out to me because i can not find it. thanks for your time =p
I didn't see an answer to this and maybe I misunderstand the question.
But if you lock the bars and lock the buttons(I use Niagara for all this), you can still move buttons around with shift-click and drag.
sorry you misunderstood, but i don't want to be able to move the buttons at all, even with shift+drag. If there is an option to enable this, similar to bongos how you could disable shift+drag or change the modifier to alt+drag or control+drag to move them, if that feature could be added that would be awsome, or if i just cant find it can you point it out? thanks again =D
As a warrior, I have a page of buttons that I frequently use; mostly macros. I'd like to keep this page on top, and on buttonpress (say, shift/ctrl) switch/page to my stancebar, with that particular stance's buttons. If I switch stances, I'd like that hidden page to change as well.
Bartender3 /seems/ to have the capability to do this, but..for the life of me I cant figure it out. Anything I may be missing? Thanks!
Bartender3 buttons are not changing when i use CyCircled since the last update, not sure if it's a config option but i have looked everywhere to no avail. Im using r31687 Cycircled, and r31808 Bartender3.
As a warrior, I have a page of buttons that I frequently use; mostly macros. I'd like to keep this page on top, and on buttonpress (say, shift/ctrl) switch/page to my stancebar, with that particular stance's buttons. If I switch stances, I'd like that hidden page to change as well.
Bartender3 /seems/ to have the capability to do this, but..for the life of me I cant figure it out. Anything I may be missing? Thanks!
Yeah, I'd love to have this too but I don't believe that it's possible. I find myself using cross-stance abilities more often than stance abilities and I'd prefer to use the Shift button to page to the appropriate stance bar than as I am using it, to page out of the stance bar to my general one. I did try a few setups to see if this could work, but not luck. I need some kind of transitive bar paging ...
In the meantime, you can set up your bars without Bartender for this macro (I don't think it's necessary, but for me it was easier):
/swapactionbar 1 2
I have that bound on a key, and I use that to toggle between the two bars (not momentary). I also have momentary paging set up in Bartender (my shouts are on ALT). I'm satisfied with it for now - and it's less muddy and befuddled than it reads. ;)
Yeah, I'd love to have this too but I don't believe that it's possible. I find myself using cross-stance abilities more often than stance abilities and I'd prefer to use the Shift button to page to the appropriate stance bar than as I am using it, to page out of the stance bar to my general one. I did try a few setups to see if this could work, but not luck. I need some kind of transitive bar paging ...
In the meantime, you can set up your bars without Bartender for this macro (I don't think it's necessary, but for me it was easier):
/swapactionbar 1 2
I have that bound on a key, and I use that to toggle between the two bars (not momentary). I also have momentary paging set up in Bartender (my shouts are on ALT). I'm satisfied with it for now - and it's less muddy and befuddled than it reads. ;)
Well, I see the inherent problem; setting Bar3 to page to Bar1(Stancebar) on press of Alt will show me Bar1 and /not/ the stance buttons (they're on 7,8, and 9).
I thought about making a macro system to manually swap actionbars, but my tries so far have ended up in more frustration~
can you add an option to bartender that allows locking of buttons when using shift+drag or ability to modify the button to drag abilitys. some of my stances are keybound to shift+other keys, and can be annoying when i click something on my bar, it will move and get removed. bongos has this feature but i want to use bartender for it. if this option is already in bartender can u plz point it out to me because i can not find it. thanks for your time =p
I didn't see an answer to this and maybe I misunderstand the question.
But if you lock the bars and lock the buttons(I use Niagara for all this), you can still move buttons around with shift-click and drag.
Is that what you was asking?
Wiltock
Yes. You can still drag buttons off the bars if you shift-drag, even when they are "locked" in the options. This is very annoying if you make macros and stuff that use the shift-click function on them. Dragging the taunt button off my bar in a fight is a bad thing :P
Yeah, I tried that too - "transitive bar paging". In Bartender, my "stance" bar is bar 1, and it updates for stances just as the Blizzard bar does. I hit my key (NUMPAD+, I used SpellBinder to set it) to run the macro "/swapactionbar 1 2". That macro toggles between Bar 1 (my stance bar) and Bar 2. Bar 2 is my most used stuff - Sunder Armor, Heroic Strike, blah blah ... In Bartender, my ALT key does a momentary switch to Bar 3 - my Shouts and a couple of trinkets are there. That bar is set for paging to the default 7,8,9 on stances as well.
And so, when I change stances, my stance bar shows up, and when I hit NUMPAD+ it swtiches back and forth between the two bars. This is done with the default Blizzard macro interface, and SpellBinder to bind a key to the macro. It's not ideal but it works well enough for me. And it's a lot easier to do than it is to explain ...
Just curiousity question mainly. I love BT3 , has really been huge upgrade from using Ctbar mod , my only concern is for PVE and PVP , I love seeing the global CD and the button show a color when being in use like Heroic strike turns dark green or something until it fires. I use Cycircled with BT3 , but nothing really shows any button global CD or noticable useage , is there plans for this or did I somewhere miss an option? Other then this great addon.
Also since this week ive had alot more trouble clicking the buttons. I pretty much have to hit the dead center now to get a button to fire and its hard to even tell if something went off from watching buttons now. Dont know what changed , but its alot harder to notice even when using a Cooldowncount mod. Sigh
Rollback Post to RevisionRollBack
To post a comment, please login or register a new account.
-
View User Profile
-
View Posts
-
Send Message
Curse PremiumUp it is possible to add this function plz ? :)
Any updates?
A simple yes/no/can't/won't/don't wanna/etc would be nice...
Sometimes when I'm kicked out of stealth the shapeshift bar gets stuck in stealth mode.
It happened 3 times during yesterday's Karazhan run and it's quite annoying.
A 'ReloadUI()' do not solve the issue. I have to quit WoW and restart it.
It would be nice if BT3 had a command to force a 'reset' (or fix the bug, if it is a bug).
Any id?as of what could cause this and possible a solution for it?
I have enabled button paging for one bar and setup catform, stealth and bearform as well as modifier 'shift' for it. Now when I hold down shift while in a shapeshift, the "shift-bar" shows up properly*, but if I leave the shapeshift while still holding down the shift-key, bartender3 will display the default bar that should only be visible when not shapeshifted or not holding down shift, instead of the "shift-bar".
(*) would also be cool if we could disable modifiers in stances btw
I'm using the same two versions as you do but the skin changes for me.
My stealthbar problem has been there for several versions though. It's just more frequent now than before and I don't think cyCircled has anything to do with that.
I didn't see an answer to this and maybe I misunderstand the question.
But if you lock the bars and lock the buttons(I use Niagara for all this), you can still move buttons around with shift-click and drag.
Is that what you was asking?
Wiltock
Help please?
As a warrior, I have a page of buttons that I frequently use; mostly macros. I'd like to keep this page on top, and on buttonpress (say, shift/ctrl) switch/page to my stancebar, with that particular stance's buttons. If I switch stances, I'd like that hidden page to change as well.
Bartender3 /seems/ to have the capability to do this, but..for the life of me I cant figure it out. Anything I may be missing? Thanks!
Same here...
Yeah, I'd love to have this too but I don't believe that it's possible. I find myself using cross-stance abilities more often than stance abilities and I'd prefer to use the Shift button to page to the appropriate stance bar than as I am using it, to page out of the stance bar to my general one. I did try a few setups to see if this could work, but not luck. I need some kind of transitive bar paging ...
In the meantime, you can set up your bars without Bartender for this macro (I don't think it's necessary, but for me it was easier):
/swapactionbar 1 2
I have that bound on a key, and I use that to toggle between the two bars (not momentary). I also have momentary paging set up in Bartender (my shouts are on ALT). I'm satisfied with it for now - and it's less muddy and befuddled than it reads. ;)
-
View User Profile
-
View Posts
-
Send Message
Curse PremiumSee the cycircled thread for the fix.
Well, I see the inherent problem; setting Bar3 to page to Bar1(Stancebar) on press of Alt will show me Bar1 and /not/ the stance buttons (they're on 7,8, and 9).
I thought about making a macro system to manually swap actionbars, but my tries so far have ended up in more frustration~
Yes. You can still drag buttons off the bars if you shift-drag, even when they are "locked" in the options. This is very annoying if you make macros and stuff that use the shift-click function on them. Dragging the taunt button off my bar in a fight is a bad thing :P
And so, when I change stances, my stance bar shows up, and when I hit NUMPAD+ it swtiches back and forth between the two bars. This is done with the default Blizzard macro interface, and SpellBinder to bind a key to the macro. It's not ideal but it works well enough for me. And it's a lot easier to do than it is to explain ...
Also since this week ive had alot more trouble clicking the buttons. I pretty much have to hit the dead center now to get a button to fire and its hard to even tell if something went off from watching buttons now. Dont know what changed , but its alot harder to notice even when using a Cooldowncount mod. Sigh