At me too the problem. Do not come back after change of the form on bar1 .
In the previous version all was normal. It was kept at whom Link on the previous version?
It is very serious problem.
Please, sombody help me: I'm trying to set up Bartender3 to skip several pages while rolling it with the mouse, I think I've tested every options, but without any success. I just want to work it like BT2 did, and the default action bar did. I've tried to ask help at the wowace irc channel, but nobody responded. Please, just help me fix this, this drives me mad O_o
It cannot be fixed, because that feature is not implemented.
And, do you plan to implement it in the future? It's well enough if you have an option not to roll on bars which are disabled or already shown. By the way, what is the difference between disabling a bar, or simple hiding it?
If you dont read my posts, i wont read yours. All posts concerning keybindings not coming back from stance will simply be ignored :)
I've read your posts, and what I wrote has nothing to do with key bindings, just changing pages on the main action bar. But if I misunderstood you, please don't leave me in doubt. :/ Or what wrote was regarding to Gozzz's post? I'm confused..
I was responding to Gozzz and all others who do not manage to setup their keybindings correctly.
The behaviour with keybindings stuck on the stance page happens when you bind the keys using the blizzard bindings UI. If you do not know howto use an addon, dont use it until its perfectly finished.
Nev, i noticed a HUGE memory increase latly, when i started to use Bar 3 i did that because it was like 5 times lower then Bongos - now warmup gives numbers like
1549 initial, 2630 garbage
i think it changed about a week ago but not sure. something is not right, since earlier it was about 300 initial + 300 garbage
Using the latest SVN as of around midnight last night (Pacific time), the following issues were present:
- keybinds not being shown on buttons
- right-click self-cast hasn't been working for several days (since the keybinding code was rewritten); is there some trick I need to know to get it working again?
Feature requests:
- ability to "snap" bars together because trying to line them up is tedious
Oops, I was just reading back a few pages and saw that bandages can't be used as self-cast. I'll have to test self-casting on my pally then because I can't think of how to test on my Hunter.
Any ideas on the keybindings not showing on the buttons? I checked to make sure the feature was enabled for the appropriate bars in the Bartender3 settings.
[2006/12/16 01:05:50-488-x4]: FrameXML\SecureTemplates.lua:217: Unknown unit token: 1
FrameXML\SecureTemplates.lua:217: in function `SecureActionButton_OnClick'
<string>:"BT3Button17:OnClick":2: in function <[string "BT3Button17:OnClick"]:1>
(tail call): ?:
<in C code>: in function `securecall'
FrameXML\SecureStateHeader.lua:909: in function <Interface\FrameXML\SecureStateHeader.lua:890>
I'd like to report a problem I keep having with my Hunter: when I click on some of my Petbar's buttons while in combat, it throws errors about trying to use protected functions, which seem to be about frame positioning.
I seem to have flooded my BugSack cache with another addons errors, so I don't have the errors right now. Will post them some other day.
I think I've found a bug... I looked and I don't think it's been reported.
When there is an item on a bar which has a cooldown running, and you drag the item to another spot, the cooldown continues to count down at it's original location, as well as the new location. Not a game-breaker really :)
I don't remember what version I have off the top of my head, but I have a (not sure if there's a common stance issue or not..) stance issue on my Druid. Here's what happens;
When I first login my bar is set to the caster bar. If I shift into Cat form, the bar stays on caster form. Previously, I could switch into a stance, get the pages to flip, and flip back. But, I couldn't use keybinds to trigger say moonfire, I had to actually click it. I came here and read that there were issues so I upgraded. This is when the bars didn't change at all.
Here's what I do to solve this. Login. Type /reloadui. Money. Everything works 100%. I'll get my version info and edit this post when I can look it up.
When there is an item on a bar which has a cooldown running, and you drag the item to another spot, the cooldown continues to count down at it's original location, as well as the new location. Not a game-breaker really :)
This also happens sometimes (but not always) when switching to another page - the cooldown count will show up on the same button, even though the item on that button on that page isn't on cooldown. Still not a huge issue though.
Also had a thought last night for a new feature that'd be nice, but definitely not a priority at this point, just something to maybe keep in mind for the future: when a button is unusable for whatever reason (in combat, out of range, not enough mana) lower the alpha to say, 50% in addition to whatever color changing it does.
Anyway, great addon, and many thanks for all the work you've put into it!
running latest version, would like to have key binds show again, and show the button outlines when pressing a button, if you know what im talking about
Since updating to version 20609 yesterday, I no longer get tool tips for anything in my bars. Tool tips still work for things in my bags, in my spell book, or in the world. Only things in my bartender bars don't have tool tips.
Is anyone else having the same problem? I did install a number of other addon updates (mostly Fubar stuff) at the same time, but since it only affects my bartender bars I thought I'd check here first.
New keybiding problem - just upgraded to latest and greatest version (Bartender3-r20609.zip) and now I cant bind keys at all. My existing keybindings are there, but the keybindings menu is MIA.
I have disabled all plugins except bartender3 and the keybindinds is still missing, so Im fairly certain there's no conflict. What am I doing wrong or what do I need to get my keybindings setting menus back?
as a rogue, i found that the Combo Points visualization gets a little buggy when i change the width of target frame. I mean, the dots get far from the frame as i increase width...when they should remain aligned to the bottom left side of it.
can i make a little suggestion? it will be nice having a few config options for combo points (thats a PRO feature lol) so, alignment, style (dots,numbers ecc) and so on ;)
It would be desirable to learn at Nevcairiel.
In what a problem with returning b1 buttons after change in a normal form. For example from cat in normal(caster)? A problem only in new version Bartender3-r20609.zip, in the previous versions all was normal, I druid.
as a rogue, i found that the Combo Points visualization gets a little buggy when i change the width of target frame. I mean, the dots get far from the frame as i increase width...when they should remain aligned to the bottom left side of it.
can i make a little suggestion? it will be nice having a few config options for combo points (thats a PRO feature lol) so, alignment, style (dots,numbers ecc) and so on ;)
As of now, Bartender3 will convert the Blizzard Keybindings into Bartender3 keybindings.
What does this mean?
If you bind the ActionBar or Multi-ActionBars from the Blizzard Keybinding UI, it will rebind it to the Bartender3 bars.
Why do the bindings not show in the Keybinding UI ?
With converting the Bindings, it unbinds the default binding und rebinds it onto the Bartender button. This Bindings will not Show in the default Binding UI, but you can view them in the Drop-down configuration menus from Bartender3.
Rollback Post to RevisionRollBack
To post a comment, please login or register a new account.
In the previous version all was normal. It was kept at whom Link on the previous version?
It is very serious problem.
Thanks you! It has helped.
And, do you plan to implement it in the future? It's well enough if you have an option not to roll on bars which are disabled or already shown. By the way, what is the difference between disabling a bar, or simple hiding it?
I've read your posts, and what I wrote has nothing to do with key bindings, just changing pages on the main action bar. But if I misunderstood you, please don't leave me in doubt. :/ Or what wrote was regarding to Gozzz's post? I'm confused..
The behaviour with keybindings stuck on the stance page happens when you bind the keys using the blizzard bindings UI. If you do not know howto use an addon, dont use it until its perfectly finished.
1549 initial, 2630 garbage
i think it changed about a week ago but not sure. something is not right, since earlier it was about 300 initial + 300 garbage
Oops, I was just reading back a few pages and saw that bandages can't be used as self-cast. I'll have to test self-casting on my pally then because I can't think of how to test on my Hunter.
Any ideas on the keybindings not showing on the buttons? I checked to make sure the feature was enabled for the appropriate bars in the Bartender3 settings.
FrameXML\SecureTemplates.lua:217: in function `SecureActionButton_OnClick'
<string>:"BT3Button17:OnClick":2: in function <[string "BT3Button17:OnClick"]:1>
(tail call): ?:
<in C code>: in function `securecall'
FrameXML\SecureStateHeader.lua:909: in function <Interface\FrameXML\SecureStateHeader.lua:890>
I seem to have flooded my BugSack cache with another addons errors, so I don't have the errors right now. Will post them some other day.
I think I've found a bug... I looked and I don't think it's been reported.
When there is an item on a bar which has a cooldown running, and you drag the item to another spot, the cooldown continues to count down at it's original location, as well as the new location. Not a game-breaker really :)
Great mod!
~Morbain
When I first login my bar is set to the caster bar. If I shift into Cat form, the bar stays on caster form. Previously, I could switch into a stance, get the pages to flip, and flip back. But, I couldn't use keybinds to trigger say moonfire, I had to actually click it. I came here and read that there were issues so I upgraded. This is when the bars didn't change at all.
Here's what I do to solve this. Login. Type /reloadui. Money. Everything works 100%. I'll get my version info and edit this post when I can look it up.
This also happens sometimes (but not always) when switching to another page - the cooldown count will show up on the same button, even though the item on that button on that page isn't on cooldown. Still not a huge issue though.
Also had a thought last night for a new feature that'd be nice, but definitely not a priority at this point, just something to maybe keep in mind for the future: when a button is unusable for whatever reason (in combat, out of range, not enough mana) lower the alpha to say, 50% in addition to whatever color changing it does.
Anyway, great addon, and many thanks for all the work you've put into it!
Is anyone else having the same problem? I did install a number of other addon updates (mostly Fubar stuff) at the same time, but since it only affects my bartender bars I thought I'd check here first.
I have disabled all plugins except bartender3 and the keybindinds is still missing, so Im fairly certain there's no conflict. What am I doing wrong or what do I need to get my keybindings setting menus back?
as a rogue, i found that the Combo Points visualization gets a little buggy when i change the width of target frame. I mean, the dots get far from the frame as i increase width...when they should remain aligned to the bottom left side of it.
can i make a little suggestion? it will be nice having a few config options for combo points (thats a PRO feature lol) so, alignment, style (dots,numbers ecc) and so on ;)
thanks 4 all m8
In what a problem with returning b1 buttons after change in a normal form. For example from cat in normal(caster)? A problem only in new version Bartender3-r20609.zip, in the previous versions all was normal, I druid.
Forgive for my bad english :)
What? :)
What does this mean?
If you bind the ActionBar or Multi-ActionBars from the Blizzard Keybinding UI, it will rebind it to the Bartender3 bars.
Why do the bindings not show in the Keybinding UI ?
With converting the Bindings, it unbinds the default binding und rebinds it onto the Bartender button. This Bindings will not Show in the default Binding UI, but you can view them in the Drop-down configuration menus from Bartender3.