The thing is I don't use S&D, i still habe loadit for all addons
Well it won't get loaded until certain S&D conditions are true. it's LoadOnDemand addon and need to be started by S&D or else it needs to be enabled by hand.
Either get S&D, or edit the .toc ## LoadOnDemand: 1 -> 0
Please excuse me if this question is totally "nooby". I switched from Bongos to Bartender2 recently, and I've yet to find any bad results of it :) However, I also downloaded DreamLayout, but I can't seem to figure out what to do with it? I have both Bartender2 and Bartender2_Dreamlayout enabled, but I can't really find any options for the latter. What exactly does dreamlayout do?
Dreamlayout simply changes the look of but buttons a bit. There should also be a new / command under /bar dreamlayout that alows you to tweak the dreamlayout a bit.
Yesterday I want to give a chance to Bartender to replace CT_Barmod - but with it (and lern2count, FuBar plugin and RangeRecolor) my WoW freezes. If I disable them, everything was correct. (Of course I disabled CT before I started playing, so they couldn't interfere.) They were all the last SVN versions.
Are there any addon that could cause this?
I've just replaced my dreaded DAB with Bartender2 and I absolutely love it.
Looks gorgeous with Dreamlayout enabled and if actually seems to be a tad "faster" than DAB. Shaved a good 3 MB (!) UI memory off too.
However, I'm wondering if there is any way to set up the second bar (Bar2, it's stacked right above Bar1 to resemble a 24-Button Bar with two Rows. 1, 2, 3 etc for the lower row, shift-1, shift-2, shift3 etc for the upper row) to behave the same way as Bar1 on Shape-Shifting?
Right now only Bar1 - the "lower row" of my virtual 24-Button Bar - changes when I shift forms.
PS: Nope, I'm not going to move back to DAB! If it isn't possible do accomplish this with Bartender, I'll just adjust my playstyle. Would be nice if there was a way to make it work though.
Yesterday I want to give a chance to Bartender to replace CT_Barmod - but with it (and lern2count, FuBar plugin and RangeRecolor) my WoW freezes. If I disable them, everything was correct. (Of course I disabled CT before I started playing, so they couldn't interfere.) They were all the last SVN versions.
Are there any addon that could cause this?
I'm sure it's already been asked several times but what's up with "Pagemaster"? I can't get it to work. My bar is merely flashing instead.
Yes pagemaster + dreamlayout = flashing bars on shift/alt/ctrl etc. I disabled dreamlayout and everything works fine for me now. Oh and I find the circle buttons still work with pagemaster so it's just dreamlayout.
However, I'm wondering if there is any way to set up the second bar (Bar2, it's stacked right above Bar1 to resemble a 24-Button Bar with two Rows. 1, 2, 3 etc for the lower row, shift-1, shift-2, shift3 etc for the upper row) to behave the same way as Bar1 on Shape-Shifting?
Right now only Bar1 - the "lower row" of my virtual 24-Button Bar - changes when I shift forms.
I just dragged bartenders bar2 to be above the bar1 and bar3 to be above it so I have a 36 button grid and an additional 24 button grid placed on the right side of my screen made out of bar4 and 5. Only bar1 changes with stance etc but that's all I need for that.
When I shapeshifton my druid, the mainbar simply disappears instead of switching to feralbar like it should :( If I open my spellbook and mouseover any of the feral skills, the bar appears, but only until I shapeshift again. Any solution to this? The druidbar thingy didn't have any effect on it, guess thats just for prowling..
Pagemaster is still non-functional for me as well. Flashing bars and all that. No actual errors generated. This is with the latest revision as of twenty minutes ago.
Pagemaster is still non-functional for me as well. Flashing bars and all that. No actual errors generated. This is with the latest revision as of twenty minutes ago.
Okay. I suspect you are using Dreamlayout and Pagemaster had some old code left in it to deal with a bug in Dreamlayout. I have removed that code. The blinky should now go away. But it also might not work at all with Dreamlayout any more.
Since I don't use Dreamlayout I won't be fixing it. If someone else wants to do that, I suggest you take the graphical style code from the existing layout and make it work like the code in Bartender2_Circles.
Also, I'll be starting a new thread in a little while to collect feedback about a redesign of Pagemaster. Look for that thread later today and please comment on it if you have opinions. I know it is a bit confusing for some people so I will be working on that.
Question...does Bartender2 support ABinfo?
I like the big numbers and buttonflash when the cooldown of a spell is over.
ABinfo supports the Blizz default bars, DAB en flexbars.
pretty much the only thing holding me back from moving to BT2 from Bongos is the ability to mousewheel all actionbars instead of just bar #1. i prefer moving all the visible bars up/down on mousewheel scroll.
Question...does Bartender2 support ABinfo?
I like the big numbers and buttonflash when the cooldown of a spell is over.
ABinfo supports the Blizz default bars, DAB en flexbars.
If I know well it isn't. Lern2count could do this, but now it isn't working...
Greetings, i want to switch from Bongos to Bartender due to less memory usage and sheer good look of the addon but i have some kind of problem.
Is there any way to bind the buttons from any other bar besides bar1?
I've been looking for some kind of option but to no avail..
Greetings, i want to switch from Bongos to Bartender due to less memory usage and sheer good look of the addon but i have some kind of problem.
Is there any way to bind the buttons from any other bar besides bar1?
I've been looking for some kind of option but to no avail..
You mean bind to keyboard? Just use the built in keybinding stuff. Bartender just reuses those.
Question...does Bartender2 support ABinfo?
I like the big numbers and buttonflash when the cooldown of a spell is over.
ABinfo supports the Blizz default bars, DAB en flexbars.
If I know well it isn't. Lern2count could do this, but now it isn't working...
I tested ABinfo with bartender2 and it works.
A option that im missing is the hide empty buttons when hoovering over them.
Rollback Post to RevisionRollBack
To post a comment, please login or register a new account.
thanks, I'll change the toc for now.
Thanks in advance,
AndyG
Are there any addon that could cause this?
Looks gorgeous with Dreamlayout enabled and if actually seems to be a tad "faster" than DAB. Shaved a good 3 MB (!) UI memory off too.
However, I'm wondering if there is any way to set up the second bar (Bar2, it's stacked right above Bar1 to resemble a 24-Button Bar with two Rows. 1, 2, 3 etc for the lower row, shift-1, shift-2, shift3 etc for the upper row) to behave the same way as Bar1 on Shape-Shifting?
Right now only Bar1 - the "lower row" of my virtual 24-Button Bar - changes when I shift forms.
PS: Nope, I'm not going to move back to DAB! If it isn't possible do accomplish this with Bartender, I'll just adjust my playstyle. Would be nice if there was a way to make it work though.
get rid of lern2count for now.
Okay. I suspect you are using Dreamlayout and Pagemaster had some old code left in it to deal with a bug in Dreamlayout. I have removed that code. The blinky should now go away. But it also might not work at all with Dreamlayout any more.
Since I don't use Dreamlayout I won't be fixing it. If someone else wants to do that, I suggest you take the graphical style code from the existing layout and make it work like the code in Bartender2_Circles.
Also, I'll be starting a new thread in a little while to collect feedback about a redesign of Pagemaster. Look for that thread later today and please comment on it if you have opinions. I know it is a bit confusing for some people so I will be working on that.
UPDATE: Please post comments/suggestions for Pagemaster redesign on this thread: http://www.wowace.com/forums/index.php?topic=2530.0
I like the big numbers and buttonflash when the cooldown of a spell is over.
ABinfo supports the Blizz default bars, DAB en flexbars.
just my $.02 =).
If I know well it isn't. Lern2count could do this, but now it isn't working...
Is there any way to bind the buttons from any other bar besides bar1?
I've been looking for some kind of option but to no avail..
You mean bind to keyboard? Just use the built in keybinding stuff. Bartender just reuses those.
I tested ABinfo with bartender2 and it works.
A option that im missing is the hide empty buttons when hoovering over them.